User's Manual

MONITOR IN

OUT

LEFT RIGHT

Setup

Items not listed under Introduction > Box Contents are sold separately.

Operation

1. Attach your DSLR camera securely on top of the hot shoe mount.

2. Attach the Threaded Insert on PMD-602A onto your tripod mount.

3. Place the tripod on a level surface.

4. Connect microphones or line-level devices to PMD-602A and use the Input Selector to

choose Line (for line-level sources), Mic (for self-powered microphones), or PH (for

microphones that require phantom power).

5. If your microphone requires phantom power, select the appropriate voltage for your

microphone (12V or 48V) using the PH Voltage switch.

6. Adjust the Level control to set the gain for the input signal.

7. Set the Gain Selector for the channel to Hi (high) or Lo (low), depending on your source.

8. Use headphones to monitor the input signal or to hear the audio playback from your DSLR

camera.

Camera audio

output

Camera mic input

Microphone

Tripod

Headphones