User Manual

5
Features
Tower, Front Panel Tower, Rear Panel Microphone, Underside
1. Brightness: Turn this knob to adjust the brightness of the light ring around the camera.
2. Camera On/Off: Press this button to turn the camera on or off.
3. Microphone On/Off: Press this button to turn the microphone on or off.
4. Mix: Turn this knob to adjust the balance of audio signals sent to the headphone output. Turning
it counter-clockwise toward PC will increase the volume of the audio signal of your computer.
Turning it clockwise toward Mic will increase the volume of the audio signal of the microphone.
5. Headphone Volume: Turn this knob to adjust the volume of the headphone output.
6. Headphone Output (1/8”/3.5 mm, stereo/TRS): Connect your headphones here. Use the
headphone volume knob to adjust the volume.
7. USB Ports 1 & 2 (USB Type A): Connect USB flash drives to these USB ports. When the USB
port labeled To PC is connected to your computer, you can use it to access these USB drives.
8. USB Port To PC (USB Type C): Use the included USB cable to connect this USB port to your
computer. This connection allows Turret to send/receive audio and video data to/from your
computer. It also allows any USB drives connected to USB Ports 1 and 2 on Turret to be
accessible on your computer.
9. Aux Out (1/8”/3.5 mm, stereo/TRS): Use an audio cable to connect this output to the input of an
external mixer, speaker, etc. The Aux Out is for the microphone audio signal only.
10. Power Input (12 VDC, 1 A, center-positive): Use the included power adapter to connect this
input to a power outlet.
11. Microphone Sensitivity: Use this switch to set the microphone sensitivity to 0 dB or -10 dB.