Owner's Manual

GWhen “Height Speakers” is set to “Using Dolby Speakers”H
Select the height channels used for the two pair.
AUDIO OUT connectors
Select items
HEIGHT1 HEIGHT2
Front Dolby
(Default)
Front Dolby Not assigned.
Surround Dolby Surround Dolby Not assigned.
Back Dolby Back Dolby Not assigned.
Front Dolby & Top Rear Front Dolby Top Rear
Front Dolby & Rear Height Front Dolby Rear Height
Front Height & Surr. Dolby Front Height Surround Dolby
Front Height & Back Dolby Front Height Back Dolby
Top Front & Surr. Dolby Top Front Surround Dolby
Top Front & Back Dolby Top Front Back Dolby
Front Dolby & Surr. Dolby Front Dolby Surround Dolby
Front Dolby & Back Dolby Front Dolby Back Dolby
o
Detailed settings when “Assign Mode” is set to
“9.1ch + Front B”
When “Assign Mode” is set to “9.1ch + Front B”, set the following
items.
n
Pre-out for Front B
Select the PRE OUT connectors used for the front speakers of the
second unit.
FRONT WIDE/
HEIGHT2
(Default):
Connect the front speakers of the second unit to
the FRONT WIDE/HEIGHT2 PRE OUT
connectors.
HEIGHT1:
Connect the front speakers of the second unit to
the HEIGHT1 PRE OUT connectors.
SURROUND
BACK:
Connect the front speakers of the second unit to
the SURROUND BACK PRE OUT connectors.
Contents Connections Playback Settings Tips Appendix
220
Front panel Display Rear panel Remote Index