Owner's Manual
Table Of Contents
- Quick Start Guide
- Owners Manual
- Reset
- Panel Lock
- Remote Lock Function
- Video Conversion Function
- Features
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Connections
- Troubleshooting
- Specs
- Index
- Spec Sheet
- Microphone Stand Assembly Instructions
- Scan of CD-ROM
- Speaker Wire Labels
- Warranty
o
Power does not turn on / Power is turned off
Symptom Cause / Solution Page
Power does not turn on.
0
Check whether the power plug is correctly inserted into the power outlet. 72
Power automatically turns
off.
0
The sleep timer is set. Turn on the power again. 152
0
“Auto Standby” is set. “Auto Standby” is triggered when there is no operation for a set amount of time. To
disable “Auto Standby”, set “Auto Standby” on the menu to “Off”.
245
Power turns off and the
power indicator flashes in
red approx. every 2
seconds.
0
Please re-install this unit in a place having good ventilation. －
Power turns off and the
power indicator flashes in
red approx. every 0.5
seconds.
0
Turn down the volume and turn on the power again. 74
0
This unit’s amplifier circuit has failed. Unplug the power cord and contact our customer service center. －
The power to this unit does
not turn off when you press
the Power operation
button. “ZONE2 On” or
“ZONE3 On” appears on
the display.
0
Power in either ZONE2 or ZONE3 is on. To turn off the power of the device (standby), press either the
ZONE2 ON/OFF or ZONE3 ON/OFF button on the main unit, or press the POWER X button after
pressing the Z2 or Z3 button on the remote control to turn off the power of ZONE2 or ZONE3.
－
Contents Connections Playback Settings Tips Appendix
269
Front panel Display Rear panel Remote Index