User guide

ManualsBrandsMarantz ManualsHome Theater SystemAV8003

CONNECTIONS SETUP

BASIC

OPERATION

REMOTE

CONTROLLER

TROUBLESHOOTING

OTHERS

NAMES AND

FUNCTION

ADVANCED

OPERATION

ENGLISH

ZONE PLAYBACK USING THE SURROUND

BACK PREOUT TERMINALS

This unit allows you to connect another set of power

amp and place them in a different ZONE or separated

area for Iistening to music.

TOP

ZONE

SPEAKER

SPEAKE R

DISPLAY

INPUT

7.1CH

DIRECT

PURE

PHONES

THX

M-DAX

MODE

SURROUND

SURROU ND

CLEAR

MEMORY

T-M OD E

T-MODE

BAND

EXIT

ZONE

DOWN

VOLUME

INPUT

SELECTOR

SELECTO R

AUTO

SETUP MIC

HDMI

M-DAX

PURE DIRECT

PURE D IRECT

POWER ON/OFF

POWER O N/OFF

STANDBY

AV PRE TUNER AV8003

AV PRE TU NER AV800 3

ENTER

3. 4.1.

Pressing the ZONE SPEAKER button on the

unit one time accesses the ZONE SPEAKER

A settings. Pressing it two times accesses the

ZONE SPEAKER B settings. Then, pressing it

a third time turns the ZONE SPEAKER feature

off.

When the ZONE SPEAKER setting mode is

engaged, one of the following screens appears

on the display for 10 seconds.

* Display when ZONE SPEAKER A is selected

ZSA DVD -18dB

* Display when ZONE SPEAKER B is selected

ZSB DVD -18dB

Select an input source with the INPUT

SELECTOR knob.

Turn the VOLUME knob to set the volume of

the ZONE used in the zone system as you

like.

Note:

• The sleep timer, monaural output and other features

can also be set using the MAIN MENU. (See page

35.)

Notes for Zone Speaker

• The Zone Speaker mode can be set for only one of

the ZONEs, A or B.

• The ZONE SPEAKER output can be used when

Surround Back Speaker = “NONE, ZSP A or ZSP

B” in the SPEAKER SETUP menu. (See SPEAKER

SETUP, page 29)

• “The Surr. Back Speakers are in use” is displayed

when the ZONE SPEAKER button is pressed when

the Surround Back Speaker is not set to “NONE,

ZSP A or ZSP B” in the SPEAKER SETUP menu.

(See SPEAKER SETUP, page 29)

• The Zonespeaker mode cannot be used at the same

time as the speaker C. When connecting for zone

use, set the SPEAKER C selector switch on the rear

panel to OFF.

• When the unit is put in ZONE SPEAKER mode and

ZSP A or ZSP B has been set as the Surround Back

Speaker (P.29), the ZONE SPEAKER function can

be turned on automatically simply by pressing the

SOURCE button.

CONTROLLING THE ZONE FUNCTION FROM

ANOTHER ROOM

The ZONE function can be controlled from another

ZONE, even from a ZONE not set for this unit, by

connecting a MARANTZ product with external IR

receiver or infrared receiver using the RC2001 or

Zone remote controller RC101. (See page 17)

SET THE REMOTE CONTROLLER TO A MODE THAT

CONTROLS ZONE A OR B.

Operations such as switching the input source

between ZONE A and B and turning the ZONE

function on/off can be performed by setting the

ZONE for using the remote controller.

3. 3.

Press the HOME button.

Press the </> button umtil 003 is displayed.

Press the ZONE-A or ZONE-B button.

<RC101>

ZONE A mode (default setting)

ZONE B mode

ZONE C mode (this zone not used by this unit)

ZONE D mode: MAIN ZONE (the ZONE in which this

unit is installed)

(In the example given here, the user changes

the mode used to control ZONE A.)

Hold down the SET button and ZONE button

simultaneously until the Send indicator ﬂ ashes

twice. The backlight lights.

Press the ZONE A button. The Send indicator

ﬂ ashes twice when the setting is complete.

The following buttons are now used for ZONE

A only. Volume adjustment, sleep timer, mute,

and input functions can be selected from the

ZONE.

POWER ON/OFF

SOURCE

INFO SLEEP

VOL +/–

MUTE

Once the operation in 2. is performed, pressing the

ZONE B button switches the mode being controlled

to ZONE B. Pressing the ZONE D button switches

the mode being controlled to MAIN ZONE.

Notes:

• When using a tuner (AM or FM) in the MAIN

ZONE and tuner is selected for the input function of

ZONE, the tuner cannot be used from ZONE. Only

the same broadcast as that being used for MAIN

ZONE can be listened to.

• ZONE output is analog only. Digital signal input is

not supported.

AV8003N.indb 52AV8003N.indb 52 08.4.28 10:49:32 AM08.4.28 10:49:32 AM