Operation Manual

110
Switches light illumination on/off
•You can switch the lighting around the main display on or off.
•The factory setting is “On”.
DISPLAY
Press and hold DISPLAY on the main unit for 3 seconds.
•Carry out the same procedure if you want to change the settings again.
Various memory functions
Personal memory plus function
This function sets the settings (input mode, sound mode, HDMI output mode, MultEQ
®
XT 32, Dynamic
EQ, audio delay etc.) last selected for the individual input sources.
The surround parameters, tone settings and the volumes of the different speakers are stored for the
individual sound modes.
Last function memory
This function stores the settings which were made before going into the standby mode.
When the power is turned back on, the settings are restored.
Basic version
Advanced version
Informations
Advanced version
DVD