Operation Manual

114
Menu map
For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page.
By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.
How to make detailed settings
Setting items Detailed items Description Page
Audio
Dialog Enhancer Adjusts and enhances the frequency band
corresponding to the human voice at the center
channel to make the voice clearer.
120
Subwoofer Level This setting adjusts the volume level for the
subwoofer.
120
Surround Parameter Adjusts surround sound parameters.
120
Tone Adjusts the tonal quality of the sound.
122
M-DAX Expands the low and high frequency components
of compressed audio to enable richer audio
playback.
122
Audio Delay Compensates for incorrect timing between video
and audio.
122
Volume Set the MAIN ZONE (room where the unit is
located) volume setting.
123
Audyssey Makes Audyssey MultEQ
®
XT 32, Audyssey
Dynamic EQ
®
, Audyssey Dynamic Volume
®
,
Audyssey LFC™ and Audyssey DSX
®
settings.
123
Graphic EQ Uses the graphic equalizer to adjust the tone of
each speaker.
125
Video
Picture Adjust Adjusts the video quality.
127
HDMI Setup Makes settings for HDMI video/audio output.
127
Output Settings Makes screen-related settings.
129
Analog Video Out Assigns the zone that uses the COMPONENT
VIDEO MONITOR OUT and VIDEO MONITOR
OUT connectors.
130
On Screen Display Select the on-screen display user interface
preferences.
131
TV Format Set the video signal format to be output for the
TV you are using.
131
Setting items Detailed items Description Page
Inputs
Input Assign Changes input connector assignment.
133
Source Rename Changes the display name for this source.
135
Hide Sources Remove from the display input sources that are
not used.
135
Source Level Adjusts the playback level of the audio input.
135
Input Select Sets the audio input mode and decode mode.
136
Video Source Video of another input source is played back
combined with the playing audio.
136
Speakers
Audyssey
®
Setup The acoustic characteristics of the connected
speakers and listening room are measured and
the optimum settings are made automatically.
35,98
Manual Setup Perform when setting the speakers manually
or when changing settings made in Audyssey
®
Setup.
138
Network
Information Display network information.
142
Network Enables network communication in standby
power mode.
142
Friendly Name The Friendly Name is the name of this unit
displayed on the network. You can change the
Friendly Name according to your preferences.
142
Settings Make settings for wired LAN.
143
Diagnostics Used to check the network connection.
144
Maintenance Mode Use when receiving maintenance from a marantz
service engineer or custom installer.
144
Basic version
Advanced version
Informations
Advanced version
v See overleaf
DVD