Operation Manual

128
Video
Setting items Setting details
Video Output
Make settings for HDMI
monitor output.
Auto(Dual) : The presence of a TV connected to the HDMI MONITOR 1
or HDMI MONITOR 2 connector is detected automatically, and that TV
connection is used.
Monitor 1 : A TV connected to the HDMI MONITOR 1 connector is always
used. Video is not output from the TV connected to the HDMI MONITOR
2 connector.
Monitor 2 : A TV connected to the HDMI MONITOR 2 connector is always
used. Video is not output from the TV connected to the HDMI MONITOR
1 connector.
•If both the HDMI MONITOR 1 and HDMI MONITOR 2 connectors are
connected and “Resolution” (vpage130) is set to “Auto”, the signals
are output with a resolution compatible with both TV.
•With “Resolution” (vpage 130) not set to “Auto”, check whether
the TV you are using is compatible with the resolution under “Video” –
“HDMI Monitor 1” or “HDMI Monitor 2” (vpage148).
•This can also be set by pressing HDMI OUT on the main unit.
Each time HDMI OUT is pressed, the setting is changed as shown below.
Auto (Dual) Monitor 1
Monitor 2
NOTE
Depending on the monitor you have connected, the display may not
be correct when you set to “Auto(Dual)”. In such a case, set to either
“Monitor 1” or “Monitor 2”.
Vertical Stretch
Sets whether video signals
are vertically stretched or
not.
On : Stretches video signals vertically.
Off : Does not stretch video signals vertically.
“Vertical Stretch” can be set when “i/p Scaler” is set to anything
other than “Off”.
Setting items Setting details
HDMI Pass Through
Selects how the AVP will
pass HDMI signals to the
HDMI output in standby
power mode.
On : Passes the selected HDMI input through the AV pre tuner’s HDMI
output when the AV pre tuner is in standby power mode.
Off : No HDMI signals are passed through the AV pre tuner’s HDMI output
in standby power mode.
NOTE
When “HDMI Pass Through” is set to “On”, it consumes more
standby power. If you are not using this unit for an extended period, it
is recommended that you unplug the power cord from the power outlet.
HDMI Control
You can link operations with
devices connected to HDMI
and compatible with HDMI
Control.
On : Use HDMI control function.
Off : Do not use HDMI control function.
•When a device that is not compatible with the HDMI control function is
connected, set “HDMI Control” to “Off”.
•Please consult the operating instructions for each connected device to
check the settings.
•Refer to “HDMI control function” (vpage102) for more information
about the HDMI control function.
NOTE
•When “HDMI Control” is set to “On”, it consumes more standby
power. If you are not using this unit for an extended period, it is
recommended that you unplug the power cord from the power outlet.
•The HDMI control function controls operations of a TV that is compatible
with the HDMI control function. Make sure that the TV and HDMI are
connected when you perform HDMI control.
•If the “HDMI Control” settings have been changed, always reset the
power to connected devices after the change.
Pass Through Source
This unit will “pass through”
the sources HDMI video
signal when in standby.
Last : Choose this option to “pass through” the last used HDMI input
video source.
CBL/SAT / DVD / Blu-ray / GAME / AUX1 / AUX2 / MEDIA PLAYER /
CD : Choose one of these HDMI sources to be passed through when this
unit is in standby.
“Pass Through Source” can be set when “HDMI Control” is set to
“On” or “HDMI Pass Through” is set to “On”.
Basic version
Advanced version
Informations
Advanced version
v See overleaf
DVD