Operation Manual

182
Symptom Cause/Solution Page
When the HDMI
ZONE4 function is
used, no video or
audio is output to TV
in ZONE4.
•Make sure that the power is on for ZONE4.
•Check the input source for ZONE4.
•Check the output settings (resolution/audio format) for the input
device.
•The HDMI 7 / MHL connector on the front panel does not support
the HDMI ZONE4 function.
•For ZONE4, playback is only possible when the input signals are
HDMI signals.
113
113
–
–
–
When playing back
the input device just
to use the HDMI
ZONE4 function, the
TV used for MAIN
ZONE is turned on.
•“HDMI Control” in the menu is set to “On”. When using the
HDMI ZONE4 function, set “HDMI Control” in the menu to “Off”.
102, 128
GVideoH
Symptom Cause/Solution Page
No picture appears. •Check the connection between the video output terminal of this
unit and the input terminal of the TV.
•Match the input settings to the input terminal of the TV connected
to this unit.
11, 17
–
GAudioH
Symptom Cause/Solution Page
Audio is not output. •Check the connections for all devices.
•Check the speaker connections and configurations.
•Check the connections for PRE OUT terminals.
•Check whether the audio device power is turned on.
•Adjust the master volume.
•Cancel the mute mode.
•Check the connection with the playback device and select the
proper input source.
•Match the input mode and the terminal assigned to be the digital
input terminal.
•Disconnect the headphones. No sound is output from the PRE
OUT terminals when headphones are connected.
11,12,17,18,
19,20,21,22,
23,24,26,27,
28,29,30,31,
33
31,95,96,97
31,95,96,97
–
44, 113
44, 113
43, 113
136
162
The volume does not
increase.
•The maximum volume is set too low. Set the maximum volume
using “Limit”on the menu.
•Power for external devices connected to the output connectors
of the unit may not be turned on. Check the power of connected
external devices.
123
–
No sound is
produced from
surround speaker.
•Check if the surround speakers are connected to the SURROUND
terminals of power amplifier.
–
No sound is
produced from
surround back
speaker.
•Set “Speaker Config.” – “Surr.Back” on the menu to something
other than “None”.
•Set the sound mode to something other than “STEREO” and
“VIRTUAL”.
138
86
No sound is
produced from front
height speaker.
•Set “Speaker Config.” – “Front Height” on the menu to something
other than “None”.
138
No sound is
produced from front
wide speaker.
•Set “Speaker Config.” – “Front Wide” on the menu to something
other than “None”.
138
Basic version
Advanced version
InformationsInformations
v See overleaf
DVD