Operation Manual

187
Specifications
n Audio section
•Analog
Input sensitivity/Input impedance: Unbalanced input: 200 mV/47 kΩ
Balanced input: 400 mV/94 kΩ
Frequency response: 10 Hz – 100 kHz — +1, –3 dB (DIRECT mode)
S/N: 105 dB (IHF–A weighted, DIRECT mode)
Distortion: 0.005 % (20 Hz – 20 kHz) (DIRECT mode)
Rated output: Unbalanced pre-output: 1.2 V
Balanced pre-output: 2.4 V
•Digital
D/A output: Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 100 dB
Digital input: Format — Digital audio interface
•Phono equalizer (PHONO input — MEDIA PLAYER OUT)
Input sensitivity: 2.5 mV
RIAA deviation: ±1 dB (20 Hz – 20 kHz)
S/N: 74 dB (A weighting, with 5 mV input)
Rated output: 150 mV
Distortion factor: 0.03 % (1 kHz, 3 V)
n Video section
•Standard video connectors
Input/output level and impedance: 1 Vp-p, 75 Ω
Frequency response: 5 Hz – 10 MHz — 0, –3 dB (when “Video Conversion” set to “Off”)
•Color component video connector
Input/output level and impedance: Y signal — 1 Vp-p, 75 Ω
P
B / CB signal — 0.7 Vp-p, 75 Ω
P
R / CR signal — 0.7 Vp-p, 75 Ω
Frequency response: 5 Hz – 60 MHz — 0, –3 dB (when “Video Conversion” set to “Off”)
n Tuner section
(ANTENNA input – MEDIA PLAYER OUT)
[FM]
(Note: μV at 75 Ω, 0 dBf = 1 x 10
–15
W)
Receiving Range: 87.50 MHz – 108.00 MHz
Usable Sensitivity: 1.2 μV (12.8 dBf)
50 dB Quieting Sensitivity: MONO 2.8 μV (20.2 dBf)
S/N (IHF–A weighted): MONO 70 dB
STEREO 67 dB
Distortion (1 kHz): MONO 0.7 % (1 kHz)
STEREO 1.0 % (1 kHz)
n Switching hub
Standard IEEE 802.3 (10 Base-T)-compliant
IEEE 802.3u (100 Base-TX)-compliant
Number of ports 4 ports
n General
Power supply: AC 230 V, 50/60 Hz
Power consumption: 90 W
Power consumption in standby mode: 0.2 W
Power consumption in CEC standby
mode: 0.5 W
Power consumption in network
standby mode: 5.1 W
For purposes of improvement, specifications and design are subject to change without notice.
Basic version
Advanced version
InformationsInformations
DVD