Operation Manual

31
Connecting a power amp
•Connect a power amp (sold separately) to the PRE OUT terminal of
this unit.
•This unit has UNBALANCED RCA PRE OUT terminal and BALANCED
XLR PRE OUT terminal. Connect to the correct terminal for your
power amp. If your power amp has both terminals, connect to either
of them.
•Connect the speakers to the power amp.
•For details on speaker connections, see the User Guide for the
power amp.
•This section shows how to make a 11.1 ch connection by using a
surround speaker. For how to make other speaker connections, see
page95.
GAV8801 BALANCED XLR PRE OUT terminal PIN
arrangementH
1
2
3
q GND (Ground)
w HOT (+)
e COLD (–)
The PIN arrangement in this device uses the European method.
In the USA method,
w is COLD, and e is HOT.
When connecting a device that utilizes the USA type of PIN
arrangement, replace
the w and e plugs on one side of the balanced cable.
NOTE
Do not short the HOT and GND or COLD and GND for use.
Example of connections to marantz MM8077 power amp
n Connecting the unbalanced RCA PRE OUT terminal
SBL SBR
FL FR
C
SL
SR
SW
FWR
FWL
FHRFHL
Speaker cables
(sold separately)
Audio cables
(sold separately)
Subwoofer with
built-in amplifier
GMM8077H GMM8077H
Basic version
Advanced version
Informations
Basic version
v See overleaf
DVD