User Manual

Menu map
When using menu operations, connect this unit to a TV and operate this unit while viewing the TV.
The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences.
Setting items Detailed items Description Page
Audio
Subwoofer Level Adjust Adjusts the subwoofer channel volume for all input sources. 179
Bass Sync Adjusts the phase shift when there is a delay in the bass (LFE) recorded on a disc. 179
Surround Parameter Adjusts surround sound parameters. 180
M-DAX Expands the low and high frequency components of compressed audio content such as
MP3 files to enable richer audio playback.
184
Audio Delay Compensates for incorrect timing between video and audio. 185
Volume Sets the MAIN ZONE (room where the unit is located) volume setting. 186
Audyssey
Makes Audyssey MultEQ
®
XT32, Audyssey Dynamic EQ
®
, Audyssey Dynamic
Volume
®
and Audyssey LFC
TM
settings.
187
Graphic EQ Uses the graphic equalizer to adjust the tone of each speaker. 190
Video
Picture Adjust Adjusts picture quality. 192
HDMI Setup Makes settings for HDMI Audio Out, HDMI Pass Through and HDMI Control settings. 194
Output Settings Makes settings for video output. 199
Analog Video Out Selects the zone that uses component video output and video output. 202
On Screen Display Configures the on-screen display settings. 203
4K Signal Format Set the 4K signal format when the TV or playback device is 4K compatible. 204
TV Format Sets the video signal format to be output for the TV you are using. 205
Contents Connections Playback Settings Tips Appendix
174
Front panel Display Rear panel Remote Index