Owner's Manual

o
Pre-out for Bi-Amp / Pre-out for Front B
When “Assign Mode” is set to “11.1ch (Bi-Amp)” or “11.1ch + Front B”
in the menu, select the PRE OUT connectors used for bi-amp or
second pair front speakers.
HEIGHT 2：
The assigned channels are output from
the HEIGHT2 PRE OUT connectors. Up
to one pair of height, ceiling, and Dolby
Atmos Enabled channels can be used.
HEIGHT 3
(Default)：
The assigned channels are output from
HEIGHT3 PREOUT connectors. Up to
two pairs of height, ceiling, and Dolby
Atmos Enabled channels can be used.
The front wide channel cannot be used.
SURROUND BACK:
The assigned channels are output from
the SURROUND BACK PRE OUT
connectors. The surround back channel
cannot be used.
o
Floor
n
Layout
Select the floor speakers location.
5ch & SB & FW:
This layout combines a surround back or
front wide speaker with the basic 5-
channel layout.
5ch & SB
(Default):
This layout combines a surround back
speaker with the basic 5-channel layout.
5ch & FW:
This layout combines a front wide
speaker with the basic 5-channel layout.
5ch：
This is a basic 5-channel layout that uses
front speakers, center speakers and
surround speakers.
Contents Connections Playback Settings Tips Appendix
223
Front panel Display Rear panel Remote Index