User guide

11
ENGLISH
OPERATION
CONNECTING THE POWER
SUPPLY AND TURNING ON
1. Plug the power cable into AC Power Input jack
on the rear panel.
2. Turn on the power switch of the audio unit
(amplifier, etc.) that is connected with this unit.
Set the selector on the connected unit to this
unit.
3. Plug the power cable into an AC outlet.
4. Turn the power on by pressing POWER
ON/STANDBY button on the unit or ON button
on the remote control unit.
•
The unit repeats switching from ON and
Standby every time the POWER ON/STANDBY
button is pressed.
AC IN
NORMAL PLAYBACK
DISC
R
PROGRAM
TRACK
MP3 CD
1
6
11
16
2
7
12
17
3
8
13
18
4
9
14
19
5
10
15
20
RANDOM REPEAT 1DISC
SECMIN
TOTAL
EACH
REMAIN
1
2
3
4
5
5 DISC CD CHANGER CC4001
POWER ON/STANDBY
STANDBY
OPEN/CLOSE
REPEAT
LEVEL
PHONES
RANDOM
PLAY STOP PAUSE
DISC SKIP12345
2. 1. 3. 4.
REMOTE CONTROLLER
RC4001CC
STANDBY ON
OPEN/CLOSE TIME
PROGRAM
RANDOM
DISC 1 DISC 2 DISC 3
DISC 4 DISC 5
AMS REPEAT
RECALL
DIMMER
123
456
789
0
4.
1. 3.
1. Press 0 OPEN/CLOSE button on the unit or
remote control unit to open the disc tray. Hold
the edge of the disc and place on the tray.
• Do not touch the back side (shiny side) of a
CD.
• To play a single CD (8 cm), place the disc with
the indentation at the center of the tray.
2. To set multiple discs, press DISC SKIP button
on the main unit. With the turn table on the tray
rotating, set the disc one by one.
3. Press 0 OPEN/CLOSE button on the main
unit or remote control unit to close the disc
tray.
4. When 3 PLAY button on the main unit or
remote control unit is pressed, playback starts
from the first track.
•
At this time, “
3” lights up on the display window.
• All discs are played
(example)
To start playback from the disc 2
Disc 2/first track →.....→ last track
→Disc 3/first track →.....→ last track
→Disc 4/first track →.....→ last track
→Disc 5/first track →.....→ last track
→Disc 1/first track →.....→ last track
→ Stop
5 DISC CD CHANGER CC4001
POWER ON/STANDBY
STANDBY
OPEN/CLOSE
REPEAT
LEVEL
PHONES
RANDOM
PLAY STOP PAUSE
DISC SKIP12345
Caution
• Place a disc on each tray correctly. If not, the
unit cannot be operated and discs may be
damaged.
• Be careful not to have your finger caught when
you close the tray.
If the finger is caught, press
0 OPEN/CLOSE
button to open the tray.
• Do not insert a disc in the way shown as the
arrow.
• Do not place any other media other than a disc
on the tray.
• Do not pile up discs on a tray. Do not place
more than two disc on a tray.
• Do not force to open/close the tray. Always use
0 OPEN/CLOSE button to open/close the
tray.
• While the tray is open and rotating, do not
touch or stop the tray with fingers.
5 DISC CD CHANGER CC4001
POWER ON/STANDBY
STANDBY
OPEN/CLOSE
REPEAT
LEVEL
PHONES
RANDOM
PLAY STOP PAUSE
DISC SKIP12345
CC4001N_01_eng 06.5.17 6:14 PM ページ11