Contents Connections Playback Settings Tips Appendix . CD Player CD5005 You can print more than one page of a PDF onto a single sheet of paper.
Contents Connections Playback Display Rear panel Tips Appendix Connections 4 5 5 6 6 6 7 7 9 10 11 Accessories Inserting the batteries Operating range of the remote control unit Features High quality sound High performance Part names and functions Front panel Display Rear panel Remote control unit Front panel Settings Connecting to a stereo audio amplifier Connecting to a device with digital audio input connectors Connecting devices with remote control connectors Connection Setting Connecting th
Contents Connections Playback Settings Settings Appendix Appendix 35 36 37 37 38 38 Menu map Menu operation Digital Out Timer Play Display Info Auto Standby Playable media Discs Files Playback order of MP3/WMA files About discs and files Cautions on using media Inserting a disc How to handle media Cleaning discs Explanation of terms Specifications Index Tips 40 41 Tips Troubleshooting Front panel Tips Display Rear panel 3 Remote Index 44 44 44 45 46 47 47 48 48 49 50 53
Contents Connections Playback Settings Tips Appendix Thank you for purchasing this Marantz product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference. Accessories . . . . Check that the following parts are supplied with the product. CD-ROM (Owner’s Manual) Safety Instructions Remote control unit (RC002PMCD) R03/AAA batteries Warranty (for USA/for CANADA) . . . .
Connections Contents Playback Settings Inserting the batteries 2 Appendix NOTE 0 When inserting the batteries, be sure to do so in the proper direction, following the q and w marks in the battery compartment. 0 To prevent damage or leakage of battery fluid: Remove the rear lid in the direction of the arrow and remove it. 0 Do not use a new battery together with an old one. 0 Do not use two different types of batteries.
Contents Connections Playback Settings Tips Appendix Features High quality sound High performance 0 Using Marantz original HDAM® SA2 circuit 0 Equipped with pitch control function (v p. 28) The unit uses an HDAM® SA2 circuit, whose quality has been proved in Super Audio CD players and high-end amplifiers, as a high-speed buffer amplifier. You can enjoy the high speed and high-quality sound like that produced by high-end equipment.
Contents Connections Playback Settings Tips Appendix Part names and functions Front panel w e r ty u i o Q0 Q1 Q22 Q3 Q4 . q A Power operation button (X) This turns the power on/off (standby). (v p. 24) C Disc tray open/close button (5) Opens and closes the disc tray. (v p. 26) B Power indicator This is lit as follows according to the power status: 0 Power on : Off 0 Standby : Red D Fast-forward/Forward-skip button (7/9) Plays the next track. Press and hold to fast-forward the track. (v p.
Contents Connections t yu Playback Settings i o Q0Q1 Q22 Q3 Q4 Tips Appendix J Headphones jack (PHONES) Used to connect headphones. NOTE To prevent hearing loss, do not raise the volume level excessively when using headphones. . K Play button (1) Playback starts. (v p. 27, 33) E Fast-reverse/Reverse-skip button (8/6) Returns to the start of the currently playing track. Press and hold to fastreverse the track. (v p. 27, 33) L Stop button (2) Stops playback. (v p.
Contents Connections Playback Settings Tips Appendix Display qw r t y . e A Information display Displays various information or playback elapsed time and so on of the disc. D RANDOM indicator Lights during random playback. (v p. 27, 33) B Playback mode indicators 1 : Lights up during playback. 3 : Lights up during pause. E Repeat mode indicators Lights to match the repeat mode settings. (v p.
Contents Connections Playback Settings Tips Appendix Rear panel . q w e A AUDIO OUT connectors Used to connect devices equipped with analog audio inputs connectors or an external power amplifier. (v p. 18) Rear panel y E FLASHER IN jack Used when using a control BOX or other such control devices to control this unit. C REMOTE CONTROL jacks Used to connect to a Marantz amplifier that is compatible with the remote control function. (v p.
Contents Connections Playback Settings Tips Appendix Remote control unit o Operating this unit To operate CD player, press REMOTE MODE CD button to switch the remote control to the CD operation mode. 0 REMOTE MODE CD button lights for approximately two seconds. q w A Power operation button (X) This turns the power on/off (standby). (v p. 24, 38) e r t B Remote mode select button (REMOTE MODE CD) This switches the remote control operating mode to CD.
Contents Connections Playback Settings Tips Appendix F Information button (INFO) This switches the track information shown in the display during playback. (v p. 31, 34, 38) G TIME button This switches the playback time display (track elapsed time, track remaining time and total remaining time). (v p. 27, 33) H Cursor buttons (uio p) These select items. (v p. 33, 36) Q3 I Program button (PROG) This sets program playback. (v p. 29) J Number buttons (0 – 9) These enter letters or numbers into the unit.
Contents Connections Playback Settings Tips Appendix N Pause button (3) Pauses playback. (v p. 27, 33) O Play button (1) Playback starts. (v p. 27, 33) P Playback mode switching button (MODE) This switches the playback mode. (v p. 33) Q ENTER button This determines the selection. (v p. 33, 36) R SETUP button This displays the setting menu on the display. (v p. 36) Q4 Q5 S CLEAR button This clears the program registration. (v p. 30) T REPEAT A-B button This sets A-B repeat playback. (v p.
Contents Connections Playback Settings Tips o Amplifier operations A Marantz amplifier can be operated.
Contents Connections Playback Settings Tips Appendix o Network audio player operations To operate a Marantz network audio player, press the REMOTE MODE NET button to switch the remote control to the network audio player operation mode. 0 REMOTE MODE NET button lights for approximately two seconds.
Contents Connections Playback Settings Tips Appendix M Pause button (3) N Play button (1) O Playback mode switching button (MODE) P ENTER button Q SETUP button R CLEAR button S Search button (SEARCH) T REPEAT button (L) Q3 Q4 0 The amp and tuner can be operated with the amp operation buttons even when the remote control mode is “NET”. 0 When using it, also refer to the operating instructions of the other devices.
Connections Playback Settings o Contents Appendix o Cables used for connections Connecting to a device with digital audio input connectors 19 Connecting devices with remote control connectors 20 Connecting the timer device 21 Connecting the power cord 22 Provide necessary cables according to the devices you want to connect. Audio cable (supplied) . 18 Remote connector cable (supplied) . Connecting to a stereo audio amplifier Optical cable (Sold separately) .
Connections Contents Playback Settings Tips Connecting to a stereo audio amplifier Use this connection for audio playback via an amplifier. Amplifier AUDIO IN L R L R L .
Connections Contents Playback Settings Tips Connecting to a device with digital audio input connectors You can enjoy digital audio playback by connecting an AV receiver or D/A converter that has a digital audio terminal to this unit. AV receiver / D/A converter OPTICAL IN .
Contents Connections Playback Settings Tips Appendix Connecting devices with remote control connectors When you use this unit connected to a Marantz amplifier, this unit receives operation signals sent from the amplifier and operates accordingly. Next, configure the “Connections” and “Settings”. Connection This unit Use the supplied remote connector cable to connect the REMOTE CONTROL IN connector of this unit to REMOTE CONTROL OUT connector of the amplifier.
Contents Connections Playback Settings Tips Connecting the timer device This unit can perform timer play when an amplifier and timer device are connected to this unit. (“Timer Play” (v p. 37)) This unit Amplifier To household power outlet (AC 120 V, 60 Hz) .
Contents Connections Playback Settings Tips Connecting the power cord After completing all the connections, insert the power plug into the power outlet. To household power outlet (AC 120 V, 60 Hz) .
Contents Connections Playback Settings Tips o Contents Basic operation 24 Playing CDs 26 Playing DATA CDs (MP3 and WMA files) 32 Front panel Display Rear panel 23 Remote Index Appendix
Contents Connections Playback Settings Tips Appendix Basic operation Turning the power on POWER X 1 SOUND MODE Press POWER X to turn on power to the unit. The power indicator turns off. You can also switch the power to standby by pressing X on the main unit. o When power is switched to standby 1 Press POWER X. The unit switches to standby mode, and the Power indicator lights red. .
Contents Connections Playback Settings Appendix Switching the sound mode Switching the display’s brightness This function turns the unit display and digital output off to playback higher sound quality from the audio signal. The brightness of the display can be adjusted to one of four levels. 1 Tips Press DIMMER. 1 In the stop mode, press SOUND MODE. Audio EX OFF (Default): Audio EX mode is not set.
Contents Connections Playback Settings Tips Appendix Playing CDs Playing CDs PITCH CONTROL RESET PITCH CONTROL – 1 2 PITCH CONTROL + 2 1 3 8 9 INFO Insert a disc. (v p. 47) 0 Press 5 on the unit to open/close the disc tray. Press 1. The 1 indicator lights on the display. Playback starts. NOTE 0 Do not place any foreign objects in the disc tray. Doing so could damage the set. 0 Do not push the disc tray in by hand when the power is turned off. Doing so could damage the set.
Contents Connections Operation buttons Function 1 Playback 3 Pause Playback Settings 1 Stop 89 Skip to previous track / Skip to next track RANDOM P Random playback REPEAT L Repeat playback 0 Switching between All-track repeat and Single- The number you enter is set about 1.5 seconds after you press the number buttons. To enter a two-digit number, be sure to press the two number buttons, one immediately after the other. track repeat. REPEAT A-B A-B repeat playback (v p.
Contents Connections Playback Settings 1 This changes the playback speed (pitch) of playback during playback of a music CD (CD-DA). Press PITCH CONTROL RESET. 0 The “PITCH” indicator disappears from the display, and "Pitch:0" appears in the display. 0 Press PITCH CONTROL RESET again to switch back to the o Increasing the playback speed previously set playback speed. Press PITCH CONTROL +. NOTE 0 The pitch control function is only enabled when the Audio EX setting is set to “Audio EX OFF”. (v p.
Contents Connections Playback Settings You can specify the section within a track that you want to hear, and play it back repeatedly. Up to 25 tracks can be programmed. During playback, press REPEAT A-B at the point where you want to start playing repeatedly. 1 “Repeat A-” is displayed on the display. 2 Appendix Playing tracks in a specific order (Program playback) A-B repeat playback 1 Tips 2 Press REPEAT A-B at the point where you want to stop playing repeatedly.
Contents Connections Playback Settings o Checking the order of the programmed tracks Tips Appendix Skipping tracks you don’t want to hear (Delete program playback) In the stop mode, press 9. The tracks are shown in the programmed order in the display each time 9 is pressed. A maximum of 25 tracks can be programmed for delete program playback. 1 o To clear the last track programmed In the stop mode, press CLEAR. To clear the last track programmed.
Contents Connections Playback Settings o To clear the last delete program track Tips Appendix Switching the display (CD-TEXT) In the stop mode, press CLEAR. The last track in the delete program is cleared. The last track set in the delete program is cleared in order each time CLEAR is pressed. 0 You can view text information stored on a disc as CD-TEXT on this unit. Mainly, information on the current track being played is displayed. 0 A maximum of 32 characters can be displayed.
Contents Connections Playback Settings Tips Appendix Playing DATA CDs (MP3 and WMA files) 0 This section explains how to playback MP3 and WMA files that are 8 9 recorded onto a CD-R or CD-RW. For details on how to playback files recorded onto media other than CD-R or CD-RW, see the following sections. 0 There are many music distribution sites on the Internet allowing you to download music files in MP3 or WMA (Windows Media® Audio) format.
Contents Connections Playback Settings Playing files 1 3 4 5 Appendix Operation buttons Function 1 Playback Load a CD-R or CD-RW disc containing music files in the MP3 or WMA formats into the disc tray. (v p. 47) 3 Pause Press MODE to select the folder mode or all mode. ui Folder select About the display 0 When “Folder mode” is selected “FLD” indicator lights. All the files in the selected folder are played. 0 When “All mode” is selected “FLD” indicator turns off.
Contents Connections Playback Settings Tips o Switching the display NOTE 0 Programmed playback is not possible with MP3/WMA discs. 0 Copyright-protected files cannot be played. (The “Not Support” is displayed.) Note that depending on the software used for burning and other conditions, some files may not play or display correctly. During playback, press INFO. 0 Switching between the file name, title name, artist name and album name.
Contents Connections Playback Settings Tips Appendix Menu map By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences. Setting items Description Page Digital Out Setting the digital audio output signal. 37 Timer Play This unit can perform timer play by cooperating with your timer device. 37 Display Info Sets the information displayed during playback of CD-TEXT Disc, MP3 and WMA files.
Contents Connections Playback Settings Tips Appendix Menu operation 1 2 2 3 4 INFO Press SETUP while playback is stopped. The menu is displayed on the display. Use ui to select the menu to be set or operated, then press ENTER. Use ui to change to desired setting. Press ENTER to enter the setting. 0 To return to the previous item, press o. 0 Exiting the Menu, press SETUP while the menu is displayed. The display returns to the normal display. uio ENTER .
Contents Connections Playback Settings Tips Appendix Digital Out Timer Play Switched the digital audio output on/off. This unit can perform timer play by cooperating with your timer device. (“Connecting the timer device” (v p. 21)) On (Default): Use the digital audio output connector. Off: Do not use the digital audio output connector. On: Timer play is set. Off (Default): Timer play is not set. o Using the timer play function 1. 2. 3. 4. 5. 6.
Contents Connections Playback Settings Tips Appendix Display Info Auto Standby Sets the information displayed during playback of CD-TEXT Disc, MP3 and WMA files. Sets whether to automatically switch the unit to the standby mode when the unit remains in the stop mode for more than 30 minutes. File Name (Default): Displays the file name. On: Enable Auto Standby mode. Title: Displays the title name. Off (Default): Disable Auto Standby mode. Artist: Displays the artist name.
Contents Connections Playback Settings Tips Appendix o Contents Tips Troubleshooting I want to enjoy analog output audio at higher quality 40 Power does not turn on / Power is turned off 41 I want to display CD-TEXT 40 Operations cannot be performed through the remote control unit 42 I want to skip tracks on a CD 40 Display on this unit shows nothing 42 I want to repeatedly listen to a specific section 40 No sound comes out 43 I want to playback just the specified folder 40 Cannot
Contents Connections Playback Settings Tips Appendix Tips I want to enjoy analog output audio at higher quality 0 Set Audio EX which turns digital output and the display off. (v p. 26) I want to display CD-TEXT 0 This unit is compatible with CD-TEXT. Press the INFO button to switch the displayed information. (v p. 31) I want to skip tracks on a CD 0 Select the tracks that you want to skip in delete program playback mode. (v p.
Contents Connections Playback Settings Tips Appendix Troubleshooting If a problem should arise, first check the following. 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase.
Contents Connections Playback Settings Tips Appendix o Operations cannot be performed through the remote control unit Symptom Operations cannot be performed through the remote control unit. Cause / Solution Page 0 Batteries are worn out. Replace with new batteries. 5 0 Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within 5 30°. 0 Remove any obstacle between this unit and the remote control unit.
Contents Connections Playback Settings Tips Appendix o No sound comes out Symptom No sound is produced. Or sound is distorted. Cause / Solution Page 0 Check the connections for all devices. 17 0 Insert connection cables all the way in. － 0 Check that input connectors and output connectors are not reversely connected. － 0 Check cables for damage. － 0 Check the amplifier’s functions and controls and adjust as necessary.
Contents Connections Playback Settings Tips Appendix Playable media Discs Files CD-R and CD-RW discs created in the format described below can be played. Playable media CD . o Writing software format ISO9660 level 1, 2 Expansion format (Juliet.Romeo) . CD-R o When written in other formats, it may not be possible to play the disc properly. .
Contents Connections Playable files (Extension) Playback Settings When there are multiple folders containing MP3/WMA files, the playback order of folders is automatically set when this unit reads the media. The files in each folder are played back in the order in which the files were recorded on the media, from the oldest date and time.
Contents Connections Playback Settings Tips About discs and files Files, such as MP3/WMA etc., recorded on CD-R/-RW are divided into large segments (folders) and small segments (files). Files are stored in folders, and folders can be placed for storage in a hierarchy. The unit can recognize up to 8 levels of folders. CD-R/-RW Folder 1 File 1 File 2 File 5 1st level File 3 Folder 3 2nd level File 6 File 7 3rd level . File 4 Folder 2 0 When writing MP3/WMA etc.
Contents Connections Playback Settings Tips Appendix Cautions on using media Inserting a disc NOTE 0 Set the disc in the tray label side up. 0 Only load one disc at a time. Loading two or more discs can damage the unit or scratch the discs. 0 Do not use cracked or warped discs or discs that have been repaired with adhesive, etc. 0 Do not use discs on which the sticky part of cellophane tape or labels is exposed or on which there are traces of where labels have been removed.
Contents Connections Playback Settings How to handle media 0 Do not get fingerprints, oil or dirt on discs. 0 If there are fingerprints or dirt on a disc, wipe them off before using the disc. 0 0 0 cases. Do not bend or heat discs. Do not enlarge the hole in the center. Do not write on the labeled (printed) surface with ball-point pens, pencils, etc., or stick new labels on discs.
Contents Connections Playback Settings Tips Appendix Explanation of terms MP3 (MPEG Audio Layer-3) Dynamic range This is an internationally standardized audio data compression scheme, using the “MPEG-1” video compression standard. It compresses the data volume to about one eleventh its original size while maintaining sound quality equivalent to a music CD. The difference between the maximum undistorted sound level and the minimum discernible level above the noise emitted by the device.
Contents Connections Playback Settings Tips Specifications o Audio performance 0 Analog output Channels: 2-channels Playable frequency range: 2 Hz – 20 kHz Playable frequency response: 2 Hz – 20 kHz (±0.5 dB) S/N: 110 dB Dynamic range: 100 dB Harmonic distortion: 0.002 % (1 kHz) Wow & flutter: Crystal accuracy 0 Output level Signal type: 2.35 V RMS stereo Headphone output: 28 mW/32 Ω/ohms (variable maximum) 0 Digital output Coaxial: 0.
Contents Connections Playback Settings Tips o General Power supply: AC 120 V, 60 Hz Power consumption: 14 W Power consumption in standby mode: 0.35 W or less Operating temperatures: +5 ℃ - +35 ℃ Operating humidity: 5 – 90 % (without dew) For the purpose of improvement, the specifications and design are subject to change without notice.
Contents Connections Playback Settings Tips 8 55/64 (225) 5 5/64 (129) 5/32 (4) 2 21/64 (59) 13 25/64 (340) 12 61/64 (329) 1 49/64 (45) 9/32 (7) o Dimensions (Unit : in. (mm)) 5 15/64 (133) 2 13/64 (56) 1 31/32 (50) 4 9/64 (105) 1 31/32 (50) 13 25/64 (340) . o Weight : 11 lbs (5.
Contents Connections Index Playback Settings vD vA A-B repeat playback ....................................... 29 Accessories ..................................................... 4 Amplifier connections ..................................... 18 Audio EX ........................................................ 25 Auto Standby ................................................. 38 AV receiver connections ................................ 19 Bit rate ........................................................
D&M Holdings Inc.
English Français ESPAÑOL CD Player CD5005 Quick Start Guide Guide de démarrage rapide Guía de inicio rápido
Welcome Thank you for choosing a Marantz CD player. This guide provides step-by-step instructions for setting up your CD player. Please do not return this unit to the store – call for assistance. If you need help… : If you need additional help in solving problems, contact Marantz customer service in your area. 1-855-ONE-Marantz 1-855-663-6272 Call for Assistance: Monday – Friday 10:00AM to 10:00PM E.S.T, Saturday 12:00PM to 8:00PM E.S.T For frequently asked questions please visit http://marantz.custhelp.
Setup There are five steps to the setup process.
2 Connect the CD player to the amplifier Amplifier R L AUDIO IN R L R 3 L
3 Plug the power cord into a power outlet Connect to household power outlet (AC 120 V, 60 Hz) 4 Turn the CD player’s power on Power cord (supplied) 4
5 Begin CD playback Play a CD 1 Press 5 to open the disc tray. 3 1 2 Place CD in the disc tray. M-DAX 3 SOUND MODE 3 SOURCE DIRECT 5 INPUT 3 Press 1. Playback starts.
Owner’s Manual Please reference these manuals for more details about the setup and operation of the CD player and it’s features. nn Web Manual To read it on your tablet or PC, please access to Web Manual site. manuals.marantz.com/CD5005/NA/EN/ This Web Manual is optimized for tablets and mobile devices. nn PDF Manual To read the owner's manual on your computer or to print it out, please open the included CD-ROM or select the “PDF Download” link from the Web Manual. 1 Insert the disc into your PC.
www.marantz.com You can ftnd your nearest authorized dlsb1butor or dealer on our websne. JDaPantz• isaregisteredtrademark. D&M Holdings Inc.
CD PLAYER 005005 Cop,/ . . gs \0C· ,. nght ©20 14 D&M \-\o\d\\1
Safety Instructions A . ITI.arantz (Read these safety instructions before operating the unit.) 0 SAFETY PRECAUTIONS CAUTION: IILIJ~-A To completely disconnect this product from the mains, disconnect the plug from the wall socket outlet. The mains plug is used to completely interrupt the power supply to the un1t and must be within easy access by the user ELECTRIC SHOCK I IRISK OF DONOTOPEN I CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK).
CAUTION (FOR AMPLIFIER): HOT SURFACE. DO NOT TOUCH. The top surface over the internal heat sink may become hot when operating this product continuously. Do not touch hot areas, especially around the "Hot surface mark" and the top panel Hot PRECAUTION (POUR AMPLIFICATEUR): surface mark SURFACE CHAUDE. NE PAS TOUCHER. La surface supE!rieure du dissipateur de chaleur peut devenir chaude si vous utilisez ce produit en continu.
Pour CANADA mateantz® GARANTIE LIMITEE DE MARANTZ CANADA Marantz Canada ("Marantz") garantie les produits suivants pour les periodes indiquees : 3 ans de garantie pour les pieces et Ia main d'muvre prenant effet apartir de Ia date d'achat du produit : Amplificateurs, Preamplificateurs, Pre-ampli-processeurssyntoniseurs; amplificateurs integres, syntoniseurs, recepteurs, Blu-ray DVD Super Audio CD I Lecteur CD I Changeur, telecommandes programmables, Docks iPod et projecteurs avantDLP.
For CANADA mateantz® MARANTZ CANADA LIMITED WARRANTY Marantz Canada ("Marantz") warrants the following Marantz products for the periods indicated: Who May Enforce the Warranty 3-year warranty for both Parts & Labour, from the original purchase date : What We Will Pay For Amplifiers; Pre Amplifiers; Pre Amplifier-Processor-Tuners; Integrated Amplifiers; Tuners; Receivers; Blu-ray DVD Super Audio CD I CD Players I Changers; Learning Remote Control Devices; iPod Docks & DLP front Projectors.
For U.S.A. tnarantz® limited Warranty Marantz America, Inc. ("Marantz") warrants the following Marantz Products for the periods indicated: 1. The following Marantz Audio/Video components, have a 3 year warranty for both Parts & Labor, from the original purchase date: Amplifiers, Pre Amplifiers, Pre Amplifier-ProcessorTuners, Integrated Amplifiers, Tuners, Receivers, Blu-ray DVD SA-CD/CD Players/Changers, Learning Remote Control Devices, iPod Docks & DLP front Projectors.
