Owner's Manual

A-B repeat playback
You can specify the section within a track that you want to hear, and play it
back repeatedly.
1
During playback, press REPEAT A-B at the point where
you want to start playing repeatedly.
“Repeat A-” is displayed on the display.
2
Press REPEAT A-B at the point where you want to stop
playing repeatedly.
“Repeat A-B” is displayed on the display, and the specified section
(point A to point B) is played back repeatedly.
o
To cancel A-B repeat playback
Press REPEAT A-B.
A-B repeat playback cannot be used during random playback.
Playing tracks in a specific order
(Program playback)
Up to 25 tracks can be programmed.
1
In the stop mode, press PROG.
“Program” is displayed on the display.
2
Use 0 – 9 to select the tracks.
GExampleH
Track 4 : Press number 4 to select track 4.
Track 12 : Press numbers 1 and 2 consecutively to select track 12.
0
The number you enter is set about 1.5 seconds after you press
the number buttons. To enter a two-digit number, be sure to press
the two number buttons, one immediately after the other.
3
Press 1.
Playback starts in the programmed order.
0
When RANDOM P is pressed during program playback, the programmed tracks
are played in random order.
0
When REPEAT L is pressed during program playback, the tracks are played
repeatedly in the programmed order.
NOTE
The program is cleared when the disc tray is opened or the power is turned off.
Contents Connections Playback Settings Tips Appendix
29
Front panel Display Rear panel Remote Index