Operation Manual

43
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
Digital Out
Setting the digital audio output signal.
On (Default) : Use the digital audio output connector.
O : Do not use the digital audio output connector.
Timer Play
This unit can perform timer play by cooperating with your timer device
(vpage22 “Connecting the timer device”).
On : Timer play is set. Select the input source to be used for timer play.
O (Default) : Timer play is not set.
2 Using the timer play function
1. Turn on the power of the connected components.
2. Load a disc or connect an iPod or USB memory device.
3. Switch the amplifier’s function to input from the connected unit.
4. Set the audio timer for the desired times.
5. Turn the timer on.
The power of the components connected to the timer turns o.
When the set time is reached, the power of the dierent components
automatically turns on and playback starts from the first track.
NOTE
• The timer play does not support the random play or program play.
Disc Setup
Configures settings related to CD-TEXT Disc, MP3, WMA and AAC files
recorded on the disc.
Display Info
Sets the information displayed during playback of CD-TEXT Disc, MP3,
WMA and AAC files.
File Name (Default) : Displays the file name.
Title : Displays the title name.
Artist : Displays the artist name.
Album : Displays the album name.
%
• Press INFO to switch the information during playback.
Play File
Selects whether all files or files within a specific folder are to be played
during a MP3, WMA and AAC files playback.
All (Default) : All files on the Disc are played.
Folder : Files within a selected folder are played.
%
• You can also press MODE to change these settings.