Contents Connections Playback Settings Tips Appendix .
Contents Connections Playback Settings Appendix Connections 4 5 5 6 6 9 10 11 Accessories Inserting the batteries Operating range of the remote control unit Part names and functions Front panel Display Rear panel Remote control unit Tips Connecting an amplifier Connecting to a device with digital audio input connectors Connecting a USB memory device to the USB port Connecting devices with remote control connectors Connection Setting Connecting the timer device Connecting the power cord 18 19 20 21
Contents Connections Playback Settings Settings Appendix Appendix 36 37 38 38 39 39 40 Menu map Menu operation H/P AMP GAIN Filter Digital Out Timer Play Auto-Standby Playing back Discs Files Playing back a USB memory devices Playback order of music files About discs and files Cautions on using media Loading discs How to handle media Cleaning discs Explanation of terms Trademark information Specifications Index Tips Tips Troubleshooting Power does not turn on / Power is turned off Operations cannot
Contents Connections Playback Settings Tips Appendix Thank you for purchasing this Marantz product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference. Accessories . Check that the following parts are supplied with the product.
Connections Contents Playback Settings Inserting the batteries 1 Tips Appendix NOTE 0 To prevent damage or leakage of battery fluid: 0 Do not use a new battery together with an old one. 0 Do not use two different types of batteries. 0 Remove the batteries from the remote control unit if it will not be in use for long periods. 0 If the battery fluid should leak, carefully wipe the fluid off the inside of the battery compartment and insert new batteries.
Contents Connections Playback Settings Tips Part names and functions Front panel w e r ty Q3 . q u i o Q4 Q0 Q1 Q2 Q5 Q6 For details, see the next page.
Contents q Connections w e rt y u Playback Settings i o Q0 Q1 Q2 Tips Appendix F DISPLAY OFF indicator Lights when the display is off. (v p. 26) G Display Various information is displayed here. (v p. 9) . H Disc tray Used to insert a disc. I Remote control sensor This receives signals from the remote control unit. (v p. 5) A Power operation button (X) This turns the power on/off (standby). (v p. 25) J Play button (1) Playback starts.
Contents Connections . Q3 Q4 Playback Settings Tips Q5 Q6 M USB port This is used to connect USB storages (such as USB memory devices). (v p. 20) N DISC/INPUT button Used to select the playback source. (v p. 26) O Headphones jack (PHONES) Used to connect headphones. P Headphone volume control knob (LEVEL) Adjusts the headphone volume. NOTE 0 To prevent hearing loss, do not raise the volume level excessively when using headphones.
Contents Connections Playback Settings Tips Appendix Display qw r t y . e A Information display Displays various information or playback elapsed time and so on of the disc. D RANDOM indicator Lights during random playback. E Repeat mode indicators Lights to match the repeat mode settings. B Playback mode indicators 1 : Lights up during playback. 3 : Lights up during pause. F Folder mode indicator Lights up when the folder mode is set in the CD-R/CD-RW playback range. (v p.
Contents Connections Playback Settings Tips Appendix Rear panel . q w e r t y A AUDIO OUT connectors Used to connect devices equipped with analog audio inputs connectors or an external power amplifier. (v p. 18) D REMOTE CONTROL connectors Used to connect to a Marantz amplifier that is compatible with the remote control function. (v p. 21) B DIGITAL AUDIO OUT connectors (COAXIAL/OPTICAL) Used to connect an Amplifier or D/A converter that has a digital input connectors. (v p.
Contents Connections Playback Settings Tips Appendix Remote control unit The remote control provided with this unit can control a network audio player in addition to a Marantz amplifier. 0 “Amplifier operations” (v p. 14) 0 “Network audio player operations” (v p. 15) q w e r o Operating this unit To operate CD player, press REMOTE MODE CD button to switch the remote control to the CD player operation mode. t A Remote control signal transmitter This transmits signals from the remote control unit.
Contents Connections Playback Settings Tips Appendix F Media mode select button (INPUT) Used to select the playback source. (v p. 26) G Information button (INFO) This switches the track information shown in the display during playback. H ENTER button This determines the selection. I Cursor buttons (uio p) These select items. J BACK button Returns to the previous item. y K Number buttons (0 – 9) These enter numbers into the unit. u L PROGRAM button This sets program playback. (v p.
Contents Connections Playback Settings Tips Appendix N OPTION button Selects the playback range of the data CD. (v p. 32) O SETUP button This displays the setting menu on the display. (v p. 37) P CLEAR button This clears the program registration. (v p. 29) Q DIMMER button This switches the brightness of the display. (v p. 26) R REPEAT button (L) Switches to the repeat playback.
Contents Connections Playback Settings Tips o Amplifier operations r A Marantz amplifier can be operated. A Input source select buttons B SOURCE DIRECT button q C MUTE button (:) D Power operation button (AMP POWER X) E VOLUME buttons (df) w t 0 The remote control may not operate some products.
Contents Connections Playback Settings Tips Appendix o Network audio player operations You can operate a Marantz network audio player. To operate a Marantz network audio player, press the REMOTE MODE NET button to switch the remote control to the network audio player operation mode.
Contents Connections Playback Settings Tips K FAVORITES ADD / CALL buttons L OPTION button M SETUP button N Number/letter buttons (0 – 9, +10) O CLEAR button P DIMMER button Q REPEAT button (L) Q1 0 The remote control may not operate some products.
Connections Playback Settings o Contents Appendix o Cables used for connections 18 Connecting to a device with digital audio input connectors 19 Connecting a USB memory device to the USB port 20 Connecting devices with remote control connectors 21 Connecting the timer device 22 Connecting the power cord 23 Provide necessary cables according to the devices you want to connect. Audio cable (supplied) . Connecting an amplifier Remote connector cable (supplied) Optical cable .
Connections Contents Playback Settings Tips Connecting an amplifier Amplifier AUDIO IN R L L R L .
Connections Contents Playback Settings Tips Connecting to a device with digital audio input connectors You can enjoy digital audio playback by connecting an amplifier or D/A converter that has a digital audio connector to this unit. Amplifier / D/A converter COAXIAL IN OPTICAL IN .
Contents Connections Playback Settings Tips Appendix Connecting a USB memory device to the USB port For operating instructions see “Playing a USB memory device”. (v p. 33) . USB memory device 0 Marantz does not guarantee that all USB memory devices will operate or receive power. When using a portable USB hard disk drive (HDD) which came with an AC adapter, use that device’s supplied AC adapter. NOTE 0 USB memory devices will not work via a USB hub.
Contents Connections Playback Settings Tips Appendix Connecting devices with remote control connectors When you use this unit connected to a Marantz amplifier, this unit receives operation signals sent from the amplifier and operates accordingly. Next, configure the “Connection” and “Setting”. Connection This unit Use the supplied remote connector cable to connect the REMOTE CONTROL IN connector of this unit to REMOTE CONTROL OUT connector of the amplifier.
Connections Contents Playback Settings Tips Connecting the timer device This unit can perform timer play when an amplifier and timer device are connected to this unit. (“Timer Play” (v p. 39)) This unit Amplifier To household power outlet (AC 120 V, 60 Hz) .
Contents Connections Playback Settings Tips Connecting the power cord After completing all the connections, insert the power plug into the power outlet. To household power outlet (AC 120 V, 60 Hz) .
Contents Connections Playback Settings Tips o Contents Basic operation 25 Playing CDs 27 Playing DATA CDs 30 Playing a USB memory device 33 Front panel Display Rear panel 24 Remote Index Appendix
Contents Connections Playback Settings Tips Appendix Basic operation Turning the power on POWER X 1 Press POWER X to turn on power to the unit. 0 You can also press X on the main unit to turn on power from standby mode. 0 You can also press 1/3 to turn on power from standby mode. Switching the power to standby INPUT 1 Press POWER X. The unit switches to standby mode, and the Power indicator lights red. 0 You can also switch the power to standby by pressing X on the main unit.
Contents Connections Playback Settings The display brightness can be adjusted between four levels. Switching the display off reduces a source of noise that affects sound quality, enabling higher sound quality playback. Press INPUT to select the playback media mode. Disc (Default): Select to playback a disc. USB: Select to playback a USB memory device. 1 Display Rear panel Press DIMMER. 0 The brightness of the display switches each time the button is pressed.
Contents Connections Playback Settings Tips Appendix Playing CDs Playing CDs 1 5 2 89 2 Insert a disc. (v p. 54) 0 Press 5 to open/close the disc tray. Press 1/3. The 1 indicator lights on the display. Playback starts. NOTE 0 Do not place any foreign objects in the disc tray. Doing so could damage the unit. 0 Do not push the disc tray in by hand when the power is turned off. Doing so could damage the unit. INFO 0–9 CLEAR PROGRAM REPEAT .
Contents Connections Operation buttons Playback Settings Playback / Pause 2 Stop 0 See “About Playing Back Discs”. (v p. 49) o Playing a specific track (Direct searching) Skip to previous track / Skip to next track 89 (Press and hold) Fast-reverse / Fastforward 0-9 Select the track RANDOM P Random playback REPEAT L Repeat playback 0 Switching between All-track repeat, Single-track repeat and Repeat off.
Contents Connections Playback Settings In the stop mode, press 9. The tracks are shown in the programmed order in the display each time 9 is pressed. Up to 25 tracks can be programmed. 2 3 o To clear the last track programmed In the stop mode, press PROGRAM. “Program” appears on the display. In the stop mode, press CLEAR. The last track programmed is cleared each time the button is pressed. Use 0 – 9 to select the tracks. GExampleH Track 4 : Press number 4 to select track 4.
Contents Connections Playback Settings Tips Appendix Playing DATA CDs 0 This section explains how to playback music files that are recorded onto a CD-R/CD-RW. 0 There are many music distribution sites on the Internet allowing you to download music files in MP3 or WMA (Windows Media® Audio) format. The music (files) downloaded from such sites can be stored on CDR/CD-RW discs and played on this unit. 0 The audio format types and specifications supported by this unit for playback are as follows.
Contents Connections Playback Settings Playing files 1 Operation buttons Load a CD-R/CD-RW disc containing music files into the disc tray. (v p. 54) Appendix Function 1/3 Playback / Pause 2 Stop Skip to previous track / Skip to next track 0 Press 5 to open/close the disc tray. 2 Tips Use ui to select the music file to be played from the CD-R/CD-RW music data, then press ENTER. Playback starts.
Contents Connections Playback Settings o Switching the display Tips o Switching the playback range During playback, press INFO. 0 Switches the display between Title name / Artist name, Title name / Album name and File name. 0 If a file does not support text information or no track information is recorded, the file name is displayed. 0 The player can display the following characters: In the stop mode, press OPTION. 0 The playback range of a track can be set.
Contents Connections Playback Settings Tips Appendix Playing a USB memory device 0 Playing back music files stored on a USB memory device. 0 Only USB memory devices conforming to mass storage class standards can be played on this unit. 0 The audio format types and specifications supported by this unit for playback are as follows. For details, see “Playing back a USB memory devices” (v p. 51).
Contents Connections Playback Settings Playing files stored on USB memory devices 1 2 3 Tips Operation buttons Insert a USB memory device into the USB port. Appendix Function 1/3 Playback / Pause 2 Stop Skip to previous track / Skip to next track When you insert a USB memory device into the USB port, the media mode automatically switches to “USB”. Use ui to select the folder to be played, then press ENTER. Use ui to select the file to be played, then press ENTER. Playback starts.
Contents Connections Playback Settings Tips NOTE 0 Note that Marantz will accept no responsibility whatsoever for any problems arising with the data on a USB memory device when using this unit in conjunction with the USB memory device. 0 When a USB memory device is connected to this unit, the unit loads all of the files on the USB memory device. Loading may take a while if the USB memory device contains a large number of folders and/or files. o Switching the playback range Press OPTION.
Contents Connections Playback Settings Tips Appendix Menu map For menu operations, see the following page. By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences. Setting items H/P AMP Gain Filter Digital Out Timer Play Auto-Standby Front panel Description Set the gain of the headphone amplifier. This unit is equipped with a sound quality adjusting function which allows users to enjoy the desired playback sound quality.
Contents Connections Playback Settings Tips Appendix Menu operation 1 2 3 4 Press SETUP while playback is stopped. The menu is displayed on the display. Use ui to select the menu to be set or operated, then press ENTER. Use ui to change to desired setting. Press ENTER to enter the setting. 0 To return to the previous item, press BACK. 0 Exiting the Menu, press SETUP while the menu is displayed. The display returns to the normal display. ui ENTER BACK .
Contents Connections Playback Settings Tips Appendix H/P AMP GAIN Filter Set the gain of the headphone amplifier. Set this according to the impedance of the connected headphones. It is recommended that this is set on the “Low” side if the headphones have low impedance and on the “High” side if they have high impedance. This unit is equipped with a sound quality adjusting function which allows users to enjoy the desired playback sound quality. The unit supports PCM signal.
Contents Connections Playback Settings Tips Appendix Digital Out Timer Play Switched the digital audio output on/off. This unit can perform timer play by cooperating with your timer device. (“Connecting the timer device” (v p. 22)) On (Default): Use the digital audio output connector. Off: Do not use the digital audio output connector. Disc: Set the media mode for timer play to “Disc”. USB: Set the media mode for timer play to “USB”. Off (Default): Timer play is not set.
Contents Connections Playback Settings Tips Auto-Standby Sets whether to automatically switch the unit to the standby mode when the unit remains in the stop mode for more than 30 minutes. On: Enable Auto Standby mode. Off (Default): Disable Auto Standby mode.
Contents Connections Playback Settings Tips Appendix o Contents Troubleshooting Tips I want to switch the filter to change the desired sound quality 42 Power does not turn on / Power is turned off 44 I want to playback just the specified folder 42 Operations cannot be performed through the remote control unit 45 I want to randomly play back all tracks on a CD-R/CD-RW 42 Display on this unit shows nothing 45 I want to playback WAV files 42 No sound comes out 46 Sound is interrupted or
Contents Connections Playback Settings Tips Appendix Tips I want to switch the filter to change the desired sound quality 0 Switch the filter characteristics. (v p. 38) I want to playback just the specified folder 0 Press the OPTION button to set the playback mode to folder playback mode. (v p. 32) I want to randomly play back all tracks on a CD-R/CD-RW 0 Before playback, press the OPTION button to set the playback mode to “All Mode”, then press the RANDOMP for random playback. (v p.
Contents Connections Playback Settings Tips Appendix Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the corresponding symptoms in this section. If the symptoms do not match any of those described here, consult your dealer as it could be due to a fault in this unit.
Contents Connections Playback Settings Tips Appendix Power does not turn on / Power is turned off Power is not turned on. 0 Check whether the power plug is correctly inserted into the power outlet. (v p. 23) 0 This unit is in standby mode. Press the POWER X button on the remote control. (v p. 25) Power automatically turns off. 0 The auto standby mode setting is on. The auto standby mode automatically switches the unit to standby if there are no operations for more than 30 minutes.
Contents Connections Playback Settings Tips Appendix Operations cannot be performed through the remote control unit Operations cannot be performed through the remote control unit. 0 Batteries are worn out. Replace with new batteries. (v p. 5) 0 Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within 30°. (v p. 5) 0 Remove any obstacle between this unit and the remote control unit.
Contents Connections Playback Settings Tips No sound comes out No sound is produced. Or sound is distorted. 0 Check the connections for all devices. (v p. 17) 0 Insert connection cables all the way in. 0 Check that input connectors and output connectors are not reversely connected. 0 Check cables for damage. 0 Check the amplifier’s functions and controls and adjust as necessary. Sound is interrupted or noise occurs During playback from the CD-R/CD-RW, sound is occasionally interrupted.
Contents Connections Playback Settings Tips Appendix USB memory devices cannot be played back USB memory device is not recognized. 0 Disconnect and reconnect the USB memory device. (v p. 20) 0 Mass storage class compatible USB memory devices are supported. 0 This unit does not support a connection through a USB hub. Connect the USB memory device directly to the USB port. 0 The USB memory device must be formatted to FAT16 or FAT32. 0 Not all USB memory devices are guaranteed to work.
Contents Connections Playback Settings Tips Appendix Cannot playback Discs Cannot playback when the play button is pressed, or cannot correctly play back a specific part of the disc. 0 The disc is dirty or scratched. Either clean the disc, or insert a different disc. (v p. 55) Cannot playback CD-R/CD-RW. 0 Discs cannot be played back unless they have been finalized. Use a finalized disc. (v p. 49) 0 This may be caused by poor recording conditions, or the disc itself may be of poor quality.
Contents Connections Playback Settings Tips Appendix Playing back Discs Files Playable media CD . o Specifications of supported files Sampling frequency Bit rate MP3 32/44.1/48 kHz 48 – 320 kbps .mp3 WMA 32/44.1/48 kHz 48 – 320 kbps .wma . CD-R . CD-RW Extension o Maximum number of playable files and folders NOTE 0 Some discs and some recording formats cannot be played. 0 Non-finalized discs cannot be played.
Contents Connections Playback Settings Tips NOTE 0 Be sure to give files the extension. Files with any other extensions or files with no extensions cannot be played. 0 Recordings you have made should only be used for your personal enjoyment, and as per copyright laws may not be used in other ways without permission of the copyright holder. 0 Only music files that are not copyright-protected can be played on this unit. 0 Content downloaded from pay sites on the Internet are copyright protected.
Contents Connections Playback Settings Tips Appendix Playing back a USB memory devices 0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. 0 This unit is compatible with WMA META tags. 0 If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/MP3/Apple Lossless/DSD) or 349 × 349 (MPEG-4 AAC), then music may not be played back properly. o Specifications of supported files Sampling frequency 32/44.1/48 kHz 32/44.1/48 kHz 32/44.1/48/88.2/ 96/176.4/192 kHz 32/44.1/48 kHz 32/44.
Contents Connections Playback Settings The limits on the number of folders and files that can be displayed by this unit are as follows. Media Number of folder directory levels z1 Number of folders Number of When there are multiple folders containing music files, the playback order of folders is automatically set when this unit reads the media. Files in each folder are played in alphabetical order of file name.
Contents Connections Playback Settings Tips About discs and files Music files recorded on CD-R/-RW and USB memory device are divided into large segments (folders) and small segments (files). Files are stored in folders, and folders can be placed for storage in a hierarchy. The unit can recognize up to 8 levels of folders. CD-R/CD-RW or USB memory device Folder 1 File 1 File 2 File 5 1st level File 3 Folder 3 2nd level File 6 File 7 3rd level .
Contents Connections Playback Settings Tips Appendix Cautions on using media Loading discs NOTE 0 Set the disc in the tray label side up. 0 Only load one disc at a time. Loading two or more discs can damage the unit or scratch the discs. 0 Do not use cracked or warped discs or discs that have been repaired with adhesive, etc. 0 Do not use discs on which the sticky part of cellophane tape or labels is exposed or on which there are traces of where labels have been removed.
Contents Connections Playback Settings How to handle media 0 Do not get fingerprints, oil or dirt on discs. 0 If there are fingerprints or dirt on a disc, wipe them off before using the disc. 0 0 0 0 0 0 0 0 cases. Do not bend or heat discs. Do not enlarge the hole in the center. Do not write on the labeled (printed) surface with ball-point pens, pencils, etc., or stick new labels on discs.
Contents Connections Playback Settings Tips Appendix Explanation of terms AIFF(Audio Interchange File Format) Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 0 Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Contents Connections Playback Settings Tips Appendix MP3(MPEG Audio Layer-3) Sampling frequency This is an internationally standardized audio data compression scheme, using the “MPEG-1” video compression standard. It compresses the data volume to about one eleventh its original size while maintaining sound quality equivalent to a music CD.
Contents Connections Playback Settings Tips . Trademark information Adobe, the Adobe logo and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Contents Connections Playback Settings Tips Specifications o Audio section 0 Analog output [PCM] [DSD] Channels: 2-channel 2-channel Playable frequency range: 2 Hz – 96 kHz (sampling frequency: 192 kHz) 2 Hz – 20 kHz (sampling frequency: 44.1 kHz) 2 Hz – 100 kHz Playable frequency response: 2 Hz – 50 kHz (-3 dB) (sampling frequency: 192 kHz) 2 Hz – 20 kHz (sampling frequency: 44.
Contents Connections Playback Settings Tips 0 Optical readout system Laser: AlGaAs Wave length: 780 nm Signal type: 16-bit linear PCM Sampling frequency: 44.1 kHz 0 Digital output Coaxial: 0.5 Vp-p / 75 Ω/ohms Optical : –19 dBm 0 Digital input USB (Front): USB Type A (USB 2.0 High speed) o General Power supply: AC 120 V, 60 Hz Power consumption: 32 W Power consumption in standby mode: 0.
Contents Connections Playback Settings Tips 8 7/8 (224) 5 1/8 (129) 3/8 (7) 2 3/8 (59) 13 1/2 (341) 13 (328) 1 7/8 (45) 1/4 (6) o Dimensions (Unit : in. (mm)) 5 1/4 (133) 2 1/4 (56) 2 (50) 4 1/4 (105) 2 (50) 13 1/2 (340) . o Weight : 14 lbs 5 oz (6.
Contents Connections Index Settings Tips vF Front panel ....................................................... 6 vA Amplifier ................................................... 18, 19 Auto-Standby ................................................. 40 vP Program playback .......................................... 29 vR vC CD .................................................................. 27 vD D/A converter ................................................. 19 DATA CD .............................
. 3520 10766 10AM © 2020 Sound United. All Rights Reserved.
CD6007 CD Player QUICK START GUIDE
Welcome Thank you for choosing a Marantz CD player. This guide provides step-by-step instructions for setting up your CD player.
Setup Required for Setup Amplifier Speaker systems EN FR There are four steps to the setup process. Speaker cables ES Install batteries in the remote control unit Connect this unit to the amplifier These drawings are for illustrative purposes only and may not represent the actual product(s).
Install batteries in the remote control unit Connect this unit to the amplifier Amplifier AUDIO IN R Batteries 3 L R L R L CD6007
EN Plug the power cord into a power outlet FR Begin CD playback ES 1 Press POWER X. 2 Press 5 to open the disc tray. 3 Place CD in the disc tray. Connect to household power outlet (AC 120 V, 60 Hz) Power cord (supplied) 4 Press 1/3 to start playback .
Owner’s Manual • Refer to the Online Manual for other functions information and operation procedure details. manuals.marantz.com/CD6007/NA/EN/ Online Manual • For more information, visit www.marantz.
Printed in Vietnam 5411 11868 00AM © 2020 Sound United. All Rights Reserved.
The Most Musical Sound CD6007 CD Player Combining exclusive Marantz technologies and elegant styling, the CD6007 compact disc player features a reference class AK4490 192-kHz/24-bit D/A converter along with our HDAM-SA2 (Hyper Dynamic Amplifier Module) technology to deliver pure sonic performance. The center-mounted CD drive mechanism is compatible with music CD, CD-R and CD-RW discs, while the USB-A port even supports Hi-Res audio such as FLAC HD, DSD and more.
CD6007 Technical Specs Features CD Compatibility: CD / CD-R/RW / SA-CD / WMA / MP3 / AAC • / • /- / • / • /- Data Disc Compatibility: DSD / WAV / ALAC -/-/-/-/- CD-Text / SA-CD Text / ID3 Tag / WMA Meta Tag / AAC Meta data DAC operation mode: USB / Coax / Optical Asynchronous mode rear USB -/-/•/•/• Bit-perfect transmission HDAM+HDAM SA2 High Grade Audio Components • Customised Components Symmetric circuit layout Copper plated chassis Extra metal plate for chassis strengthing Digital out off /
For U.S.A. ■na•antz® Limited Warranty Marantz America, Inc. ("Marantz") warrants the following Marantz Products for the periods indicated: 1. The following Marantz Audio/Video components, have a 3 year warranty for both Parts & Labor, from the original purchase date: Amplifiers, Pre Amplifiers, Pre Amplifier-ProcessorTuners, Integrated Amplifiers, Tuners, Receivers, Blu-ray DVD SA-CD/CD Players/Changers, Learning Remote Control Devices, iPod Docks & DLP front Projectors.
For CANADA ■naaeantz® MARANTZ CANADA LIMITED WARRANTY Marantz Canada ("Marantz") warrants the following Marantz products for the periods indicated: Who May Enforce the Warranty 3-year warranty for both Parts & Labour, from the original purchase date : What We Will Pay For Amplifiers; Pre Amplifiers; Pre Amplifier-Processor-Tuners; Integrated Amplifiers; AV Pre Tuner; Tuners; Receivers; AV Surround Receiver; Blu-ray DVD Super Audio CD/CD Players/ Changers; CD Receiver; Turntable; Network Audio Player; D
Safety Instructions marantz . (Read these safety instructions before operating the unit.) 0 SAFETY PRECAUTIONS CAUTIONS ON INSTALLATION CAUTION: To completely disconnect this product from the mains, disconnect the plug from the wall socket outlet. The mains plug is used to completely interrupt the power supply to the unit and must be within easy access by the user. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
CAUTION (FOR AMPLIFIER): HOT SURFACE. DO NOT TOUCH. The top surface over the internal heat sink may become hot when operating this product continuously. Do not touch hot areas, especially around the "Hot surface mark" and the top panel. Hot surface mark PRECAUTION (POUR AMPLIFICATEUR) : SURFACE CHAUDE. NE PAS TOUCHER. La surface superieure du dissipateur de chaleur peut devenir chaude si vous utilisez ce produit en continu.
CAUTIONS ON USING BATTERIES AVISOS SOBRE DE LAS PILAS There is a possibility of smoke, fire, explosion from the battery, Please note as following. • Insert the specified batteries in the remote control un it. • Replace the batteries with new ones if the set does not operate even when the remote control unit is operated close to the unit. (The supplied batteries are only for verifying operation. Replace them with new batteries at an early date.