Model CDR310 User Guide CD Recorder CLASS 1 LASER PRODUCT LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
CE marking (only EU version) English This product is in conformity with the EMC directive and low-voltage directive. Français Cet appareil est conforme á la directive EMC et á la de directive sur les basses tensions. Español Esta unidad estáde acuerdo con las normas EMC y las relacionadas con baja tensión. Deutsch Dieses Gerät entspricht den EMC-Richtlinien und den Richtlinien für Niederspannungsgeräte. Italiano Quest' unitá è conforme alle direttive EMC ed alla direttiva sulle basse tensioni.
English WARNINGS Do not handle the AC adaptor with wet hands. Do not cover the ventilation with any items such as tablecloths, newspapers, curtains, etc. No naked flame sources, such as lighted candles, should be placed on the equipment. When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area. Make a space of about 0.1 meter around the unit.
Italiano AVVERTENZE Non maneggiare l’adattatore CA con le mani umide. Non coprire le fessure di ventilazione con tovaglie, giornali, tendeod oggetti analoghi. Non posare sull'apparecchio sorgenti di fiamme scoperte qualicandele accese. Smaltire le pile usate in conformità alle norme governative odisposizioni ambientali vigenti nel proprio paese o zona. Lasciare 0,1 metro liberi tutto intorno l'unità. Non mettere sull'apparecchiatura alcun contenitore di liquido, comead esempio dei vasi.
CAUTION English To completely disconnect this product from the mains, disconnect the plug from the wall socket outlet. When setting up this product, make sure that the AC outlet you are using is easily acceptable. PRECAUTION Français Pour déconnecter complètement ce produit du courant secteur, débranchez la prise de la prise murale. Lors de l’installation de ce produit, assurez-vous que la prise CA que vous utilisez est compatible.
A NOTE ABOUT RECYCLING: English This product's packaging materials are recyclable and can be reused. Please dispose of anymaterials in accordance with the local recycling regulations. When discarding the unit, comply with local rules or regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with thelocal regulations concerning chemical waste.
Introduction ....................................2 Detailed Settings for HD Recording ..22 Features ..................................................... 2 Input source settings ................................. 22 Recording format settings ......................... 23 Recording level control settings ................ 25 Microphone attenuator .............................. 27 Phantom power settings ........................... 28 Prerecord...................................................
ENGLISH Introduction Thank you for purchasing this CDR310 CD Recorder. Before using the CD recorder, make sure that you read through this instruction manual carefully to fully understand the device’s functions and how to operate them. We hope that you will continue to enjoy using the recorder for a very long time. After reading this manual, please keep it in a safe, easy to reach place for future reference. ● Recording level and LR balance adjustment (☞ P.
ENGLISH Package contents • CDR310 • AC power pack • Power cord Europe models include 2 power cords CEE BS • Battery holder (AA type) • User Guide • User Guide (CD-ROM) • Customer Registration Document 3
ENGLISH Quick Start Guide Before using the CDR310, please read through the following section which explains the basic flow of operation. 1. Setup the power supply (☞ P.11) • Use either the provided AC adaptor or batteries. • You can use any one of the 3 types of batteries: Alkaline, optional Nickel-Cadmium, or optional NickelMetal Hydride. • Please make sure batteries are fully charged. 2. Connect an external microphone and turn the power ON. (☞ P.
The glossy side shining like a rainbow is the front side of the disc, and the side on which the label is printed is the back. Unlike conventional turntables for playing analog discs, the unit reads the information recorded on the disc from underneath without contacting it using a beam of laser light. Therefore, the performance of a compact disc will not degrade like conventional analog records. Playable discs CD-R Handle discs carefully so as not to damage or scratch the front side.
ENGLISH Names and Functions Top side 1 2 3 4 9 10 5 q Power switch 6 7 8 • Track selection You can select the track you wish to play back by rotating the JOG while playback is paused, stopped, or during playback. After selecting the track that you wish to play back, press the JOG or PLAY/PAUSE button to play back the selected track. (☞ P.38) Slide this switch to switch the power on/off. w DISPLAY button Press this button to switch the contents of the display.
12 13 !5 PLAY/PAUSE button 14 Press this button when the recorder is stopped to start playback. Press this button during playback to pause playback. Also, if this button is pressed when playback is paused, playback restarts. !6 STOP button 20 Press this button during recording to stop the recording and save the recorded track (file). Press this button during playback to stop playback.
ENGLISH Front side 1 2 3 4 6 z CD slot 5 b Headphone (PHONES) jack Insert the stereo headphones plug here. x EJECT button n LEVEL volume Press this button to eject the CD that is inside the CD slot. Turn this knob to adjust the internal speaker volume or volume output from the headphone jack. c KEYLOCK switch Set this switch ON to set to the key-lock status. All of the operating buttons and switches are locked, except for the LIGHT button.
A C B D E F G E LINE IN jacks (L/R) A MIC IN jacks (L/R) (XLR balanced input) Insert RCA audio cable plugs connected to an external audio device into these jacks to input the signals output from the external device into the recorder. Insert an external microphone plug. For monaural recording, plug into either the L side or R side jack.
ENGLISH Display a s d f g ¡2 hj ¡3 ¡4 REC TIME TRACK REMAIN TIME TOTAL TRACK TIME ¡6 ¡7 Lights when “Auto TRK” is set to ON in the preset menu. The following types of details are displayed in the upper character display section. TRACK TIME ¡5 ¡1 ¡0 A.TRACK icon s TOTAL/TRACK/TIME/REC/REMAIN icon TIME ¡0 Lights when “ManualTR” is set to ON in the preset menu. Displays the remaining time, etc. REC REMAIN TIME l l M.TRACK icon a Upper character display section Lit display k ¡1 S.
If you wish to run the recorder on battery power, follow the procedure below to install batteries into the provided battery holder, and insert the holder into the recorder. The following types of battery can be used. ● Alkaline batteries ● Optional Nickel-Cadmium battery (option: parts number RB1100) ● Optional Nickel-Metal Hydride battery (option: parts number RB1651) AC adaptor connection When using the recorder with the provided AC adaptor, follow the procedure below to connect the AC adaptor.
ENGLISH 3 Installing an optional Ni-Cd or Ni-MH battery Insert the battery holder into the battery case of the recorder correctly as shown in the diagram below, while paying attention to the polarity displays (+: plus, and -: minus) on the case. Optional battery A AA A Battery holder tab A A AA A AA tab A AA A AA ribbon ribbon 4 Install the battery with tab as shown and over the ribbon for easy battery removal.
Set the battery type for the recorder to match the type of batteries you are using. Power on/off 1 Slide the power switch to switch the power ON. < Default value > Alkaline Notes The factory-preset settings are set to record sound using the external microphone input. Refer to “Menu Settings” for details on the default settings of the various menus. (☞ P.17) 1 While the recorder is stopped, press the MENU/STORE button. 2 Turn the JOG to select “Batt Type” and press the JOG.
ENGLISH Battery remaining indicator The recorder operates using commercially available AA size alkaline batteries, the optional Nickel-Cadmium battery, or the optional Nickel-Metal Hydride battery. During operation, the battery remaining indicator is as follows. Remaining indicator Display explanation No display Nothing is displayed when the AC adaptor is being used. The adaptor power supply is valid. There is still ample battery power remaining.
5 Turn the JOG to select [Year (2006 to 2099)], and press the JOG. 6 Turn the JOG to select [Time], and press the JOG. For 24 hour display : 0 ~ 23 For 12 hour display : 0am ~ 11pm 7 Turn the JOG to select [Minute (00 to 59)], and press the JOG. 8 Press the MENU/STORE button to register the settings. Set the current time (year, month, date, hour, minute). Notes The setting order is different depending on the “DateForm” settings in the menu. Check the “Date form settings” setting. (☞ P.
ENGLISH Date form settings Time form settings There are 3 types of date form. You can set the form to your own preference. There are 2 types of time form. You can set the form to your own preference.
The recorder uses 8 menus to set the various functions. There is a menu for basic settings such as time (display method), alarm, automatic power off, and battery type, and a menu for formatting the internal HD. These menus are displayed by pressing the MENU/STORE button once to enter the menu mode. You can also perform detailed settings for the recording and playback conditions, and register up to 3 of these settings in the preset menu.
ENGLISH Preset menu You can store to 3 detailed preset on the recorder for such settings as recording input, recording format, playback mode, remote control, etc. There are 17 setting items in the preset menu, and 3 presets can be set with the desired conditions. The contents of the preset menu are explained below.
The recorder uses menus to set various functions. ( ☞ P.18) You can alter the basic settings and use a wide range of recording and playback functions by changing the menu settings. The basic menu operations are explained in this section. 1 Turn the JOG to select the menu settings, then press the JOG to choose the selected settings. Second level While the recorder is stopped, press the MENU/STORE button to enter the menu mode.
ENGLISH 2 Recording to the HD Schematics Press the REC PAUSE button to pause recording. • The recording mark flashes in the display while recording is paused. REC PAUSE MIC IN L R R LINE IN L • Press the REC button when recording is paused to start recording again. DIGITAL IN 3 Basic operations for recording 1 Press the STOP button to stop recording. • The recorded track (file) information is saved to the HD. • Press the PLAY button after this to play back the recorded track from the start.
Formatting the HD You can erase data (tracks) recorded to the HD after stopping recording. Formats all of the tracks recorded onto the HD. 1 2 Notes After stopping recording, press the UNDO button to switch to the erase mode of the recorded track. • “REC UNDO?” is displayed for 3 seconds. If the HD is formatted, all contents of the HD are erased. Before formatting, re-check the contents of the HD. Press the UNDO button again while “REC UNDO?” is being displayed.
5 Turn the JOG to select the type of input source (“MIC”, “Line”, “Int.Mic”, “Dig-In”), and press the JOG. 6 Press the MENU/STORE button to register the settings. Input source settings Set the input source (internal microphone, external microphone, line input, digital input) for recording. < Default value > Preset1 : MIC Preset2 : MIC Preset3 : MIC Notes If digital input is set, only the sampling frequency 44.1KHz is available. Any other frequencies are displayed as unlocked, and are not recorded.
ENGLISH Recording format settings Set the recording format (compression format and channel) for recording. < Default value > Preset1 : Stereo/CD-DA Preset2 : Mono/MP3 Preset3 : Stereo/MP3 Notes The recording format can only be changed when there are no tracks saved on the HD. There is only one HD recording format available at onetime on the recorder. This cannot be changed if tracks are already recorded in a certain format. To change the recording format, either burn the data to a CD-R, or format the HD.
ENGLISH Set the recording format (compression format and channel) using the procedure shown below. 1 While the recorder is stopped, press the MENU/STORE button. 2 Turn the JOG to select “Preset” and press the JOG. 3 Turn the JOG to select the preset number that you wish to set, and press the JOG. 4 Turn the JOG to select “RecFormat” and press the JOG. 5 Turn the JOG to select the compression format (“MP3”, “CD-DA”, “WAVE”, “AIFF”), and press the JOG.
4 Turn the JOG to select “RecLevel” and press the JOG. 5 Turn the JOG to select the recording level (“ALC”, “Manual”) and press the JOG. 6 Press the MENU/STORE button to register the settings. Set the recording level menu (ALC, Manual) for recording. • Automatic level control (ALC) If the recording level menu is set to ALC, the recording level for external microphone input or internal microphone input is automatically set. When ALC is set, the ALC icon lights in the display.
ENGLISH [Operations when manual control is set] When the recording level menu is set to Manual, use the JOG as shown below to set the recording level. • Recording level settings Turn the JOG while recording is paused or during recording, and the manual level control screen is displayed. Turn the JOG to set the level.
Set the attenuator function for external microphone input and internal microphone input. For external microphone input, set this function when using microphones that have different sensitivity levels. The attenuator function for the external microphone can be set for the L/R sides respectively. For internal microphone input, set this function when the input sensitivity is too high. • Attenuator OFF (0dB) No microphone level attenuation.
ENGLISH Phantom power settings The recorder has DC+48V (P49) phantom power, and the phantom power can be set On/Off. Set to On when a condenser microphone that requires an external power source is used. When set to On, the “PHANTOM” icon lights in the display. For details, please refer to the instruction manual that came with your microphone. Phantom power consumes battery power.
5 Turn the JOG to select the temporary save time (1 to 10 seconds), and press the JOG. 6 Press the MENU/STORE button to register the settings. Set the PreRecord function. When the PreRecord function is set to On, sounds from the input source are saved for a set period of time (1 to 10 seconds) in stop or rec pause mode. When the recording is restarted, the audio data temporarily saved in the recorder is written to the HD, then recording continues from there.
ENGLISH Background recording 3 Turn the JOG to select the preset number that you wish to set, and press the JOG. 4 Turn the JOG to select “BkGrndRec” and press the JOG. 5 Turn the JOG to select function On/Off, and press the JOG. 6 Press the MENU/STORE button to register the settings. Set background recording. When background recording is set to On, recording is continued inside the recorder while recording is paused.
3 Turn the JOG to select the preset number that you wish to set, and press the JOG. 4 Turn the JOG to select “SilentSkp” and press the JOG. 5 Turn the JOG, and select “On” to set silent skip, “T/ON” to set silent skip/track increment, or “Off” if you do not wish to set either. After making your selection, press the JOG. Set the silent skip function. • Silent skip The silent skip function automatically pauses the recording if there is a period of no signal during recording.
ENGLISH 7 If you activate this function, turn the JOG to select the no signal time (1 to 5 seconds) and press the JOG. 8 Press the MENU/STORE button to register the settings. 3 Turn the JOG to select the preset number that you wish to set, and press the JOG. 4 Turn the JOG to select “ManTrack” and press the JOG. 5 Turn the JOG to select function On/Off, and press the JOG. 6 Press the MENU/STORE button to register the settings. Manual track Set the manual track.
3 Turn the JOG to select the preset number that you wish to set, and press the JOG. 4 Turn the JOG to select “Auto TRK” and press the JOG. 5 Turn the JOG to select function On/Off, and press the JOG. 6 When this function is activated, turn the JOG to select the auto track time (every 1, 5, 10, 15, 30 minutes, or every 1, 2, 6, 12, 24 hours, or every 640Mbyte, 700Mbyte), and press the JOG. 7 Press the MENU/STORE button to register the settings. Set auto track.
ENGLISH 4 CD Burning You can easily burn all of the data recorded on the HD onto a CD-R with this recorder. You cannot specify particular data on the HD for burning onto a CD-R. After burning onto the CD-R, all of the data is erased from the HD. When CD burning is completed, the CD-R disc is automatically ejected from the CD slot. If all of the HD data did not fit onto 1 CD-R disc, “Insert CD” message is displayed.
Recorded Date and Time of the files on the disc To burn the data again onto a different CD-R disc, turn the JOG to select “Yes”, and press the JOG. If you have finished burning to CD-R, select “No” and press the JOG. The CDR310 has the Time/Date stamp function. The track recorded date and time will be recorded at the Track Title of the CD Text for CD-DA discs, and at the Track Title of ID3 tags for MP3 discs.
ENGLISH CD Split 1 While the recorder is stopped, press the MENU/STORE button. 2 Turn the JOG to select “Preset” and press the JOG. 3 Turn the JOG to select the preset number that you wish to set, and press the JOG. 4 Turn the JOG to select “CD Split” and press the JOG. 5 Turn the JOG to select function On/Off, and press the JOG. 6 Press the MENU/STORE button to register the settings.
Schematics L LINE OUT R DIGITAL OUT 37 1 Press the PLAY/PAUSE button while the recorder is stopped to play back. • The following information is displayed during playback. 2 During playback, press the PLAY/PAUSE button to pause playback. 3 Press the STOP button to stop playback. • This display shows the stopped status of playback. If you press the PLAY/PAUSE button again, the stopped track starts playback again from the beginning of the track.
ENGLISH [Fast reverse] Track access 1 You can select the track that you wish to play back while the recorder is stopped, during playback, or while playback is paused. 1 Turn the JOG to display track selection while the recorder is stopped, during playback, or while playback is paused. 2 Select the track that you wish to play back, and press either the JOG or the PLAY/PAUSE button to play back the track.
5 Turn the JOG to select the playback mode and press the JOG. 6 Press the MENU/STORE button to register the settings. You can select the playback mode from the following 4 modes. Mode Mode explanation Normal Play back the tracks in numerical order, and playback stops when the final track playback is completed. Repeat All Repeat Track Single Repeat playback of all tracks. Repeat playback of selected tracks only.
ENGLISH Playing Back CDs Schematics L LINE OUT R DIGITAL OUT 2 Insert a CD into the recorder’s CD slot. 3 Press the PLAY/PAUSE button while the recorder is stopped to restart playback. • The following information is displayed during playback. 4 Press the PLAY/PAUSE button to pause playback. 5 Press the STOP button to stop playback. • This display shows the stopped status of playback.
If there is no operation performed for a set amount of time for auto power off while the recorder is stopped or playback is paused, the beep sound can be heard. The beep sound can be heard through the speakers or headphones. The beep sound that occurs when the remaining battery power is low can be heard through the headphones even if the recorder volume is set to minimum.
ENGLISH [When CD is stopped] Switching the display mode Depending on the status of the recorder, you can switch the information in the display by pressing the DISPLAY button.
The following display screens are for HD playback. The following display screens are for CD playback.
ENGLISH Stop Monitor settings 5 Turn the JOG to select function On/Off, and press the JOG. 6 Press the MENU/STORE button to register the settings. This function constantly monitors the input signal from the selected input source while the recorder is stopped. When the Stop Monitor function is set to On, the level and level margin of the currently connected input signal is displayed in the display. Furthermore, audio is output to the line out jack, speakers, or headphones.
4 Turn the JOG to select “Remote” and press the JOG. 5 Turn the JOG to select the switch contact operating mode, and press the JOG. 6 Press the MENU/STORE button to register the settings. 1. Using a contact remote (contact closure) and setting the operating mode Set the operating mode for the switch contact connected to the REMOTE1 jack. There are the following 3 operating modes for when the switch contact is opened and closed. Wiring diagram of switch contact device Switch 2.
ENGLISH (REC indicator) Lights red during recording, and flashes red while recording is paused. Initialization of preset settings Returns the settings of the selected preset number to default. (Peak indicator) Lights orange when the source level becomes the same level as [OVER] on the level meter during recording or recording pause. 1 While the recorder is stopped, press the MENU/STORE button. 2 Turn the JOG to select “Preset” and press the JOG.
If you think a malfunction has occurred, there may be no need to contact the dealer or the repair service counter. Please check the following points. You can easily solve many problems without needing to ask for professional help. If the problem cannot be solved even after performing these checks, contact your dealer. Cannot change recording format. • There can be only one HD recording format. If tracks already recorded in a certain format already exist, the format cannot be changed.
ENGLISH Error Messages Display Error messages Full_HD There is no space remaining on the HD. Full_999 The track number on the HD has reached the maximum number, track 999. No Track No track files detected. No Disc No disc in the CD slot. Blank Disc No files detected on the CD. Unlocked Cannot synchronize the signal because the sampling frequency of the digital input signal is not 44.1kHz. Write_Err Write to the HD or CD-R failed. Read_Err Read from the HD or CD-R failed.
LINE OUT L/R Type ........................................................................RCA jack Standard output level .......................2 Vrms max. / 2k ohms DIGITAL OUT Type ..........................................................RCA jack, Coaxial Output impedance ...................................................75 ohms Standard output level .............................................. 0.5 Vp-p Sampling frequency ................................................ 44.1 kHz Format ...............
ENGLISH Exclusion of Damages (Americas only) Liability for any defective product is limited to repair or replacement of the product at manufacturer’s option. Manufacturer shall not be liable for damage to other products caused by any defects in Marantz products, damages based on inconvenience or loss of use of the product, or any other damages, whether incidental, consequential, or otherwise.
D&M Holdings Inc. PROFESSIONAL BUSINESS COMPANY TOKYO, JAPAN http://www.dm-pro.
