Operation Manual

23
ENGLISH
Recording format settings
Set the recording format (compression format and channel) for recording.
< Default value > Preset1 : Stereo/CD-DA
Preset2 : Mono/MP3
Preset3 : Stereo/MP3
Notes
The recording format can only be changed when there are no tracks saved on the HD. There is only one HD recording format
available at onetime on the recorder. This cannot be changed if tracks are already recorded in a certain format. To change
the recording format, either burn the data to a CD-R, or format the HD. When data is burned to a CD-R, the data on the HD is
erased. Stereo/monaural can be changed.
[Recording format parameters]
The recorder can record in the following recording formats and channels.
• Compressed sound recording that uses MPEG Audio Layer III (MP3) in either monaural or stereo.
• Non-compressed sound recording that uses the 16-bit linear pulse code modulation used on a CD-DA.
• Non-compressed sound recording that uses WAVE (Windows standard audio file format)
• Non-compressed sound recording that uses AIFF (the audio file format developed by Apple Computer, Inc.)
The format parameters that can be recorded are as shown below.
When the channel setting is set to Stereo
Recording Format Sampling Frequency Bit Rate File Extension
Recordable Time
(Approximately)
MP3 44.1KHz 128Kbps .mp3 55 hrs
CD-DA 44.1KHz ---- .cda 5 hrs
WAVE 44.1KHz ---- .wav 5 hrs
AIFF 44.1KHz ---- .aif 5 hrs
When the channel setting is set to Mono
Recording Format Sampling Frequency Bit Rate File Extension
Recordable Time
(Approximately)
MP3 44.1KHz 64Kbps .mp3 110 hrs
CD-DA 44.1KHz ---- .cda 5 hrs
WAVE 44.1KHz ---- .wav 10 hrs
AIFF 44.1KHz ---- .aif 10 hrs
When burning from the HD to CD, the CD-R Format is decided by the recording format as shown below.
Recording Format CD Format
MP3 Data Disc
CD-DA CD-DA Disc
WAVE Data Disc
AIFF Data Disc