Quick Start Guide
9
Network connections and settings
n When your router is equipped with a WPS
button
By just pressing the WPS button on your router and this unit, the
wireless LAN connection settings are made.
•Before turning this unit on, make sure that an Ethernet cable is
not connected to this unit. If a cable is connected, have this unit
enter the power standby mode and disconnect the cable.
•After the unit is turned on, it takes approximately 30 seconds for
the WPS button on this unit to be available.
1
Press the WPS button of the router.
2
Press WPS on the rear panel.
“WPS” is displayed, and the unit starts connecting to the LAN.
NETLINKWPS
NETWORK
L
R
LINE IN
WIRELESS LAN
ON/STANDBY
•When the connection is made successfully, “Succeeded” appears.
•If the connection cannot be established, “Failed” is displayed.
Perform steps 1 – 2 again.
If this unit is still not connected to the network after this procedure,
manually enter the PIN code of WPS (vpage26).
NOTE
If the router uses WEP, WPA-TKIP or WPA2-TKIP encryption,
connection is not possible using the WPS button. In this case, connect
using “When your router is not equipped with a WPS button and you
are using iPhone, iPod touch or iPad” (vpage 9) or “Using PC to
make network settings of this unit” (vpage11).
n When your router is not equipped with
a WPS button and you are using iPhone,
iPod touch or iPad
Use the marantz application “Consolette App” to make the
wireless LAN connection settings.
•“Consolette App” is free.
•Before turning this unit on, make sure that an Ethernet cable is
not connected to this unit. If a cable is connected, have this unit
enter the power standby mode and disconnect the cable.
•To make the connection settings by using PC without iPhone,
iPod touch or iPad, see “Using PC to make network settings of
this unit” (vpage11).
1
Download “Consolette App” to your iPhone, iPod
touch or iPad from App Store.
2
Start the application.
3
When the “SETUP” screen is
displayed, tap “NetLink”.
•“Scanning network for devices”
is displayed.
18:37
iPod
SETUP
Device Consolette 1
App Sounds
NetLink
Language
English
Clock Settings
App Settings
Consolette 1 Settings
Auto
Network Settings
Volume Settings
BACK
4
Place your iPod, iPhone or iPad in the dock of this
unit (vpage 6).
5
Enter the encryption key.
Enter the encryption key of your
router that is connected to your
iPod, iPhone or iPad.
Consolette
NETLINKBACK JOIN
Access Point
Enter Password
18:42iPod
A
Join.?123 space
WQ
E R T Y U I O P
S D F G H J K L
Z X C V B N M
6
Tap “JOIN”.
The network settings are copied to this unit from your iPod,
iPhone or iPad and this unit is connected to the network.
SLEEP TIMER
00 : 29 min
iDevice
Consolette 1
Consolette
NETLINKBACK JOIN
Access Point
Enter Password
18:42iPod
18:37
iPod
A
Join.?123 space
WQ
E R T Y U I O P
S D F G H J K L
Z X C V B N M
USBInternet Radio iDeviceMusic Player
Music Server TunelnLINE IN
NOTE
•When this unit could not connect to the network, the application
displays an error message. Perform steps 1 – 6 again.
•The wireless network name (SSID) and encryption method used for
this unit are the same as those set for the connected iPod, iPhone
or iPad.
Preparations
Operations
Informations
Preparations