Quick Start Guide

14
Playing an iOS device
With this unit, you can listen to music on an iOS device. It is also
possible to operate the iOS device from the main unit or remote
control.
For information on the iOS device models that can be played back with
this unit, see “Connecting an iOS device” (vpage6).
Load the iOS device onto the Dock of this unit
(vpage 6 “Connecting an iOS device”).
When the iOS device is loaded to the dock tray on this unit, the input
source automatically switches to “iDevice”.
•During AirPlay, the input source does not switch automatically.
Press
iDEVICE to switch the input source to “iDevice”.
NOTE
This function is activated around 30 seconds after the power is turned
on.
n Streaming music stored in iPhone, iPod touch or
iPad directly to the unit (vpage15)
n Playing iTunes music with this unit
(vpage15)
n Disconnecting the iOS device
1
Press X POWER to set the
standby mode.
2
Remove the iOS device from the
Dock of this unit.
NOTE
•Depending on the type of iOS device and the software version,
some functions may not operate.
•Note that marantz will accept no responsibility whatsoever for any
problems arising with the data on an iOS device when using this unit
in conjunction with the iOS device.
n Remote control and iOS device button relations
Remote control
buttons
iOS device
buttons
Operation on this unit
1/3 13
Play the track / Pause the track.
8, 9
(Press and release)
8, 9
(Press and
release)
Play the track from the beginning/
Play the next track.
8, 9
(Press and hold)
8, 9
(Press and hold)
Fast-reverse the track/
Fast-forward the track.
Repeat playback
Random playback
Adjusting the master volume
Press d or f.
The volume level is displayed.
GAdjustable rangeH
0 – 99
•The default setting volume level is “40”.
n Adjusting the master volume on the main unit
Using the following operation, you can adjust the master volume
also on the main unit.
Turn GYRO during playback.
ELECTRONIC GYRO TOUCH
ENTER
FUNCTION
PLAY/PAUSE
Turning off the sound temporarily
Press MUTE .
The “Mute” is displayed.
To cancel, press MUTE again.
The mute mode is also canceled when d or f is pressed.
Switching the display
During playback, you can switch the display between playing source
information (song title, artist name, internet radio station name, etc.)
and clock display.
Press DISPLAY.
NOTE
LINE IN source playback does not display the source information.
Operations possible during playback
Preparations
Operations
Informations
Operations