Quick Start Guide

22
Menu map
Setting items Detailed items Description Default Page
Language
Language
Sets the language for display the menu. English 23
Clock
Clock
Auto Adjust(On) Automatically performs the clock setting from the
time information on the Internet.
On 23
Time Zone(–5H) Sets your local time zone (for Auto Adjust). –5H
23
Summer
Time(Off)
Sets the Summer Time information (for Auto
Adjust).
Off
24
Auto Adjust
Now
Obtains the current time.
–
24
Manual Adjust Adjusts the clock manually.
–
24
Exit Exits the “Clock” menu.
–
–
Max Volume Level
Max Volume Level
Make a setting for maximum volume. 99 25
Room setting
Room Setting
Depending on the conditions of a listening room, playback sound may
be too resonant or either bass or treble may sound enhanced. Sets the
sound quality at your preference for your listening room conditions.
PureDirect: Playback sound with no quality adjustment.
Low Bass: For weaker treble in a room with less resonance.
High Bass: For stronger treble in a resonant room.
Exit: Exits the “Room Setting” menu.
PureDirect 25
Network Info.
Network Info.
Display network information.
Friendly Name / DHCP=On or Off / IP Address / Primary DNS /
Secondary DNS / MAC Address
– 26
WPS
WPS(PIN)
Sets the wireless connection using WPS (PIN code method). – 26
Auto-Standby
Auto-Standby
With the Auto Standby ON, this unit will automatically enter the
standby mode after about 30 continuous minutes of stop mode with no
operation.
Off 26
Firmware Update
Firmware Update
Starts the firmware update. – 27
Factory Reset
Factory Reset
Reset to the defaults. – 36
Exit
Exit
To exit the menu, select “Exit”. – –
How to make detailed settings
Menu operation
This section explains the basic menu operations. Steps for item selecting and
menu exiting are common to all menus. For detailed operations on each menu,
see the respective paragraphs.
NOTE
Use buttons on this unit for menu operations. Buttons on the remote control
do not work.
1
Press FUNCTION repeatedly until
“Menu” is displayed.
ELECTRONIC GYRO TOUCH
ENTER
FUNCTION
PLAY/PAUSE
Menu
•“Menu” is displayed, then “Language” menu appears.
2
Turn GYRO to select the menu you want
to set.
ELECTRONIC GYRO TOUCH
ENTER
FUNCTION
PLAY/PAUSE
Language Clock Max
Volume
Level
Room
Setting
Network
Info.
WPS
(PIN)
Firmware
Update
Auto-
Standby
Factory
Reset
Exit
3
Press ENTER.
•The unit enters the setting mode of the
selected menu.
•Turn GYRO to select and press ENTER to enter
your selection.
ELECTRONIC GYRO TOUCH
ENTER
FUNCTION
PLAY/PAUSE
n Exiting the menu to return to the normal mode
Press FUNCTION.
•If you press FUNCTION before pressing ENTER, the setting is cancelled.
To return to the top of menu, turn GYRO to select “Exit”, then press ENTER.
Preparations
Operations
Informations
Operations