Quick Start Guide

25
Setting the volume limit
(Max Volume Level)
Make a setting for maximum volume.
•The factory default setting is “99”.
1
Press FUNCTION repeatedly until
“Menu” is displayed.
“Menu” is displayed, then “Language”
menu appears.
ELECTRONIC GYRO TOUCH
ENTER
FUNCTION
PLAY/PAUSE
2
Turn GYRO to select “Max
Volume Level”, then press
ENTER.
ELECTRONIC GYRO TOUCH
ENTER
FUNCTION
PLAY/PAUSE
Max Volume Level
•The unit enters the setting mode of the volume, and shows the
volume level currently selected.
3
Turn GYRO to select the volume “0 – 99”, then press
ENTER.
The “Max Volume Level” menu is displayed again.
n Exiting the menu to return to the normal mode
Press FUNCTION.
•If you press FUNCTION before pressing ENTER, the setting is
cancelled.
Setting the sound tone
(Room Setting)
Depending on the conditions of a listening room, playback sound
may be too resonant or either bass or treble may sound enhanced.
Three sound quality modes are available on this unit. Try the actual
effects and select the mode at your preference for your listening
room conditions.
1
Press FUNCTION repeatedly until
“Menu” is displayed.
“Menu” is displayed, then “Language”
menu appears.
ELECTRONIC GYRO TOUCH
ENTER
FUNCTION
PLAY/PAUSE
2
Turn GYRO to select “Room
Setting”, then press ENTER.
ELECTRONIC GYRO TOUCH
ENTER
FUNCTION
PLAY/PAUSE
Room Settiing
3
Turn GYRO to select the mode, then press ENTER.
The “Room Setting” menu is displayed again.
PureDirect
Playback sound with no quality adjustment.
Low Bass
For weaker treble in a room with less resonance.
High Bass
For stronger treble in a resonant room.
n Exiting the menu to return to the normal mode
Press FUNCTION.
•If you press FUNCTION before pressing ENTER, the setting is
cancelled.
To return to the top of menu, turn GYRO to select “Exit”, then press
ENTER.
Preparations
Operations
Informations
Operations