Quick Start Guide

27
n Exiting the menu to return to the normal mode
Press FUNCTION.
•The unit exits the setting mode and the normal display returns.
To return to the top of menu, turn GYRO to select “Exit”, then press
ENTER.
n Notes concerning use of “Firmware Update”
•Do not turn off the power until updating or upgrading is completed.
•Even with a broadband connection to the Internet, approximately
20 minutes is required for the updating procedure to be
completed.
•Once updating starts, normal operations on this unit cannot be
performed until updating is completed. Furthermore, updating
the firmware may reset the backup data for the parameters, etc.
set for this unit.
•If the update fails, remove and re-insert the power cord. “Update
Retry” appears on the display and update restarts from the point
at which update failed. If the error continues despite this, check
the network environment.
See the marantz website for details about updates.
Firmware Update
•In order to update the firmware, the environment and settings
required for connecting to broadband internet are needed
(vpage8)
•Perform the firmware update operation after at least 2 minutes has
elapsed since turning this unit’s power ON.
1
Press FUNCTION repeatedly until
“Menu” is displayed.
“Menu” is displayed, then “Language”
menu appears.
ELECTRONIC GYRO TOUCH
ENTER
FUNCTION
PLAY/PAUSE
2
Turn GYRO to select “Firmware
Update”, then press ENTER.
ELECTRONIC GYRO TOUCH
ENTER
FUNCTION
PLAY/PAUSE
Firmware Update
3
Turn GYRO to select “Check for Update” or “Start”,
then press ENTER.
Check for Update
Check for firmware updates.
Use
GYRO to select the item, and press ENTER.
•Up to Date: It is already the latest firmware.
•Available Yes: Updates to the latest firmware.
•Available No: Does not update to the latest firmware.
Start
Determines whether to update or not.
Use
GYRO to select the item, and press ENTER.
•Yes: Performs update.
•No: Does not perform update.
•If updating fails, the set automatically retries, but if updating is still
not possible, one of the messages shown below is displayed. If
the display reads as shown below, check the settings and network
environment, then update again.
Display Description
Updating fail Updating failed.
Login failed Failure to log into server.
Server is busy Server is busy. Wait a while then try again.
Connection fail Failure in connecting to server.
Download fail Downloading of the firmware has failed.
Preparations
Operations
Informations
Operations