. -......_-.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read Instructions - All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3.
16.Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. 17.Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits.
Table of Contents Introduction Features About the keypad Accessories Functional Overview 2 2 3 3 4 Front panel Rear panel Remote control unit (RC5300ZS) 4 5 6 ID Code Setup Preparation and Connection 8 Connecting speakers Connection example 9 9 10 Operation Examples...................••.•.....•.........
Introduction Features Thank you for purchasing the Marantz ZS5300 Multi Zone Selector Amplifier. This remarkable component has been engineered to provide you with many years of whole house audio enjoyment. Please take a few minutes to read this manual thoroughly before you connect and operate the ZS5300. As there are a number of connection and configurations options, you are encouraged to discuss your own particular multi zone setup with your Marantz AN specialist dealer.
I About. the keypad ... You can connect the majority of keypads, IR receivers as well as some control related products available in the market. Accessories • AC power cord x 1 These are examples of systems that have been tested by Marantz America: .:. NILES Keypad IR Main System unit IR Sensor IR Flasher : IntelliPad : IRP6+ :MS2 : IRC-2 • Remote control unit x 1 _NILES® The Niles logo and IntelliPad are registered trademark of Niles Audio Corporation. •:.
Functional Overview I Front panel 5 6 4 ~~""'''.roHE5B.ECTORI~ o ~II--~I 1 2 CD Main power switch (POWER ON I STANDBY) Press this button to turn the main power on. Press again to turn it off. When the main power is turned on, Zonei, Zone2 and Zone3 turn into standby mode and power for each zone can be switched with the remote control unit RC5300ZS (provided) or a Keypad (option). For regular use, please leave the unit powered on.
IR~ar panel rn Audio input terminal (AUDIO IN) Connect the analog audio output from your audio device (CD player, TV, DVD player, etc.). Up to 3 audio devices can be connected. rn Audio output terminal (AUDIO OUT) These terminals are designed as an Audio pass through. They can be used to when cascading one or two other ZS5300s. Another example might be to share source components with a dedicated home theater system etc.
IRemote control unit (RC5300ZS) 8 DIRECT POWER button You can control power for each zone independently with these buttons. • ZONE 1 DIRECT ON button Turn the power on for Zone 1 independently. • ZONE 1 DIRECT OFF button Turn the power off for Zone 1 independently. • ZONE 2 DIRECT ON button Turn the power on for Zone 2 independently. • ZONE 2 DIRECT OFF button Turn the power off for Zone 2 independently. • ZONE 3 DIRECT ON button Turn the power on for Zone 3 independently.
.:. Using the remote control unit 1. Remote control Operate the remote control unit (RC5300ZS) within a distance of approximately 16 feet (5m) from the IR (remote control) window on the front of the unit. If the transmitter is pointed to a direction other than the IR SENSOR or if there is an obstacle between them, remote control may not be possible. 2. Loading batteries Batteries in this remote control unit have a life of approximately 1 year under normal operating conditions.
/0 Code Setup .:. Setting 10 code Ex.) Set to 10-1 Remote control unit Rear panel of the unit , I @ flDlOT'e COHTl'IOl. :) " @w SP, ID SELECTOR @©2.~ is ZONE' -I R @ - 0 0 , @ 1- @ Press and hold SET, then Press 10-1 and release both. Set to "1", The ZS5300 system can be expanded up to 3 units. When using 1 unit alone, set the 10 switch on the rear panel to "1", To set the remote control unit to the 10 number of the unit, follow the procedure below. 1.
Preparation and Connection .:. Before making connections Be sure to turn the power off for the ZS5300 and other products to be connected to ZS5300 before making connections. Please refer the instruction manuals for other products to make sure of the proper connections and terminals. •:. Keypad The keypads that can be connected to the unit are keypads and connecting boxes made by NILES and XANTECH shown below.
I Connection example .:. NILES system Remote Status Analog Speaker To cascade connection IR Data Flasher ZS5300 : I , .. - - - - - ---------------- ---.. ~~l~~:::;.========:'l : ~~!~!~!~I~lwg ,, ® , ··, · ··, 12v ~0 ~I~ ~ ~1i2 ~ ~1i2 ~ ~112 ~ ~112 ~ ~ T V 0 T V 0 T V 0 T V 0 T V 0 T A A A A A A Set8JR INPUTS - - - - - - - ' _NILES MODB. IAP6+ r flASHER lEVEL---, IR ::11~::~::~~ : l\ __ ~~ _ - - - .. ' : - - - - - - - - - - - - - - - - -......
.:. XANTECH system Remote Status Analog Speaker To cascade connection IR Data Flasher Z85300 -----;- ------6'l a c: I PM110 SMART PAD!" PROGRAMMABLE MODULE 789-44 CONNECTING BLOCK 0 0 :::> . > N 0 ... t:c Q . ··· .. .. ·, . IR RCVR ___ L __ 0 I, , l _-----_ , , .. t I --..,.,-'-..u l z t3~g; I I, I ;.,~ I' 0 , , - - - ... - - - - - - - - - - - - - - - - - - - - , ~-------------------------- DC power supply plugged into an unswitched AC outlet.
.:. Cascade connection Note: To change the positions of the EXT./INT. switch and the ID switch, turn off the main power switch of the ZS5300. When the main power switch is on, changing the positions do not affect. ZS5300 (Master) ZS5300 (Slave) Set to EXT EXT. INT.
.:. Connection with the DH9300 Z85300 ["=,-;,-='-1"·;~ !~1:j~I~ ~~ - - - Remote --Analog - - Speaker - - - - - - - Video o Zone-1 Speaker Zone-2 ,-----------------------------, TV Zone-3 Speaker ,,-----------------~-----------------------------, l _ _ j -.J I _ _ _ DH9300 -':"-_-~-_-:':""- I : :: ~..;..;:;..,,;:....::..;;'-----------:-:-: I • f 0' '0 ~.;~,;~.; ~ ~ o' '0 ()JT ovr rn ~ 1 OUT' . - - - - - - -...... 1II11Oft101 @. @. @, @j @j @j @. @. @, __ ~,,2 .
.:. Connecting external power amplifier When using speakers which might need high power to drive (ex. some outdoor speakers), you might need more power than the ZS5300 can provide. If you need more power, you can connect the "ZONE 3 PRE OUT" to an external power amplifier. Sound level can be adjusted with Volume Up/Down on ZS5300. I Power amplifier ,---+.....,@@ @= Power amplifier @-: @ @- @= -~. Z85300 MA61 00 Outdoor speaker .:.
Operation Examples .:. Refer to connection example "NILES system II Main room - (~ P.10) . _ _ - - - - - - - - - - - - - ZONE 1 1. 1. 2. light up --- o o 0 .----.0 , t 3 • 5 • ~~----' ~. "@ J) 6. light up -I 1. 3. 4. light up flash 1. 6. 4. 1. Press the CD button on the keypad. The power of ZS5300's Zone 1 is turned on and the input source is switched to Input 3. Pressing the POWER button on the keypad also turns on the power. 2. Press the PLAY button on the keypad.
Remote Code List .:.
Troubleshooting In case of trouble with the unit, first check the following before calling for service. 1. Are all the connections made properly? 2. Are you operating the unit properly by following user's guide? 3. Are the other products working properly? If the unit still does not work properly, check the items shown in the following table.
, Specification Rated power output Zone1 UR (40Hz -20KHz) Zone2 UR (40Hz -20KHz) Zone3 UR (40Hz -20KHz) THD (40Hz - 20KHz) Input sensitivity Input impedance Frequency response (-1 dB) Signal to noise ratio Power requirement Power consumption '" 60W 6-ohm / Channel 60W 6-ohm / Channel 60W 6-ohm / Channel 0.05% 6-ohm 300mV / 60W Output 20K ohms 10Hz to 30KHz 85dB 115V / 230V AC 50/60Hz 100W Dimensions (Maximum) Width Height Depth Weight 17.32 inches (440 mm) 4.53 inches (115 mm) 13.31 inches (338 mm) 18.
www.marantz.com You, can find your nearest authorized distributor or dealer on our website. . . . . .. . . . . . . ]I[ Printed in Japan @ is a registered trademark.
For U.S.A. lDapantz® Limited Warranty Marantz America, Inc. ("Marantz") warrants the following Marantz Products for the periods indicated: Who may enforce the warranty This warranty may be enforced only by the original purchaser. 1.
Dlapantz® MARANTZ CANADA LIMITED WARRANTY Marantz Canada ("Marantz") warrants the following Marantz products for the periods indicated: 3-year warranty for both Parts & Labour, from the original purchase date : Amplifiers; Pre Amplifiers; Pre Amplifier-Processor-Tuners; Integrated Amplifiers; Tuners; Receivers; DVD Players; CDRecorders; CD Players; Audio Cassette Decks; Learning Remote Control Devices; Universal Dock & DLP front Projectors.
Dlapantz@ GARANTIE LlMITEE DE MARANTZ CANADA Marantz Canada ("Marantz") garantie les produits suivants pour les periodes indiquees : 3 ans de garantie pour les pieces et la main d'muvre prenant effet apartir de la date d'achat du produit : Amplificateurs, Preamplificateurs, Pre-ampli-processeurssyntoniseurs; amplificateurs integres, syntoniseurs, recepteurs, lecteurs DVD, enregistreurs CD, lecteurs CD, pIatines it cassette audio, telecommandes programmables, Dock universel et projecteurs avant DLP.