Operation Manual

Playing Discs5
24
Switching Audio Language
When playing a DVD-Video disc recorded with dialog in two or
more languages, you can switch audio language anytime during
playback.
•
To display/switch the audio language, press AUDIO repeatedly.
The current audio language is shown on-screen.
: 5.1ch
: 2ch (STEREO)
the total number of the
audio included on the disc
sound recording system
language
channel numbers
•To set audio language preferences, see page 44.
Note
• Depending on the disc, there are cases in which audio language
cannot be switched during play. In this case, make changes using the
DVD menu.
• Super Audio CD and MP3 cannot be switched.
• It may take a few seconds till a selected Audio Language is audible.
•Video distortion may occur when changing the Audio Language.
Switching audio channel
Depending on the disc, this feature may not work.
Depending on the disc, you may be able to switch channels
when playing DVD-Audio discs—see the disc box for details.
•To switch the audio channel, press AUDIO repeatedly.
On Video CDs you can switch between stereo, just the left
channel or just the right channel.
•To switch the audio channel, press AUDIO repeatedly.
The current playback channel(s) are indicated on-screen.
Using the Zoom Function
1During play or pause mode, press the ZOOM button on the
remote control to zoom in X2/X4/X16/Normal in order.
2Use the cursor buttons (5/∞/2/3) to select the part of the
screen you want to zoom in on.
Note
• Zoom play cannot be used on some discs.
• Zoom will not operate properly for some scenes.
• Zooming may cause image deterioration or shaking.