Operation Manual

6DVD Setup Menu
31
English
Using the Setup Menu
Before using the player, you should specify
the settings to be used in accordance with
the conditions under which the player is to
be used.
Note that once changed, the settings will be
saved and remain the same even after the
power has been turned off until the settings
are changed again.
The Setup menu gives you access to all the
player’s settings. Press SETUP to display/
leave the menu and the cursor and ENTER
buttons on the remote control to navigate
and select options. The controls for each
menu are shown at the bottom of the
screen.
Note
• The language options shown in the on-screen
display illustrations on the following pages may
not correspond to those available in your
country or region.
1Press the SETUP button on the remote
control. Select a tab using the cursor
buttons (2/3).
Interlace
Components Out
Video
Scart Video Out
VIDEO
16:9 Wide
TV System MULTI
Random
Move : Select : Enter
HDMI DISC SYSTEM
SPEAKER
AUDIO
SP LEVEL
TV Aspect
Slide show Mode
On
Angle Mark
~ Video: Setup of the Display Options (page 33)
Use to select which type of screen you want to
watch and several display options.
Ÿ HDMI: Setup of the HDMI (page 37)
! Audio: Setup of the Audio Options (page 39)
⁄ Speaker: Setup of the Speaker size and
Distance (page 43)
@ SP Level: Setup of the Speaker Level (page 44)
¤ DISC: Setup of the Language and several other
options (page 44)
# System: Setup of the Parental Level and several
other options. (page 46)
Allows users to set the level necessary to
prevent children from viewing unsuitable movies
such as those with violence, adult subject
matter, etc. and several other options.
2 Use the cursor buttons (5/∞) on the
remote control to access the different
features.
3Press the ENTER button as many times as
necessary to select the desired option.
To make the setup screen disappear after
setting up, press the SETUP button again.
Note
• Depending on the disc, some Setup Menu
selections may not work.
• Some settings can not be selected during
playback and RESUME mode of DVD-Video.
In that case, press the 7 (STOP) button once
or twice to stop playback completely.
• SETUP button is not pressed during playback
mode of DVD-Audio. In that case, press the 7
(STOP) button one or twice to select RESUME
mode or STOP mode.