Operation Manual

6DVD Setup Menu
37
English
Setting up the HDMI Setup
This setting is used when the unit is con-
nected by HDMI or DVI with a TV or projec-
tor.
This setting is enabled only when the HDMI
option of the FL menu is On. (page 30)
VIDEO
720p (750p)
Format YCbCr-1 (4:4:4)
16:9 Wide
Move : Select : Enter
HDMI DISC SYSTEM
SPEAKER
AUDIO
SP LEVEL
Resolution
TV Aspect
Auto
Audio
Resolution
•VGA <640 X 480>
•480p/576p (525p/625p)
•720p (750p)
•1080i (1125i)
Select one of the above with the ENTER button.
Note
• The resolutions available for HDMI outputs
depend on the connected TV or projector. For
details, see the user’s manual of your TV or
projector.
•If, after changing the resolution, images are not
displayed properly on the TV or projector, press
and hold the SETUP button for two seconds to
bring up the FL menu. Then set HDMI RESET
to reset. (page 30)
•VGA can be outputed only when TV System is
set to NTSC.
•When the resolution changes, the image may be
corrupted or the output may take longer than
normal.
•A higher number generally indicates better
picture quality (480P/576P = 720P =
1080i).
Format
•RGB-Normal
•RGB-Expand
•YCbCr-1 (4:4:4)
•YCbCr-2 (4:2:2)
Select one of the above with the ENTER button.
Note
• Image data values in RGB-Normal format range
between 16 (black) and 235 (white).
• Image data values in RGB-Expand format range
between 0 (black) and 246 (white).
• The formats available for HDMI outputs depend
on the connected TV or projector. For details,
see the user’s manual of your TV or projector.
• Only RGB-Normal and RGB-Expand can be
selected for DVI outputs.
•When black rise to the surface depending on
the display, black Setup in the Video Adjust-
ment set to OIRE.
•YCbCr-1 (4:4:4) sends 8 bit data. YCbCr-2
(4:2:2) sends 10 bit data. If your TV or
projector supports YCbCr-2 (4:2:2), you can
enjoy the superior image quality of full 10 bit
processing.
TV Aspect
• 4:3 L - Box
• 4:3 Pan Scan
•16:9 Wide
•16:9 Squeeze
Select one of the above with the ENTER button.
Note
• The TV aspect ratios available for HDMI
outputs depend on the connected TV or
projector. For details, see the user’s manual of
your TV or projector.
• Only 16:9 Wide and 16:9 Squeeze can be
selected when the HDMI/DVI resolution is set
to 720p or 1080i.
•When this TV Aspect is in effect, it also
determines the aspect output of Composite
Video, S-Video, and Component Video.