Operation Manual

DVD Setup Menu6
40
PCM Down Sample*
Default setting: On
If the digital input of your AV amplifier (or other
connected component) is compatible with high
sampling rates (96kHz), set this to Off, otherwise
set it to On (96kHz audio is converted to a more
compatible 48kHz). Check the manual that came
with the other component if you’re unsure
whether it is 96kHz compatible.
Note
•Even when set to Off, some discs will only
output down sampled audio (48kHz/44.1kHz)
through the digital outputs. High sampling rate
DVD-Audio discs (192kHz or 176.4kHz) always
output audio down sampled to 96kHz or
44.1kHz through the digital outputs.
*1
: Output will be produced from 48kHz/16-bit source.
*2
: Output will be produced from 44.1kHz/16-bit source.
*3
: Output will consist of 44.1kHz linear PCM output when replaying CD layer.
•When digital output is turned off, no digital audio data will be output from the digital audio output
terminal (see page 39).
PCM Down Sample
ON
48kHz
48kHz
44.1kHz
48kHz
44.1kHz
48kHz
44.1kHz
48kHz
44.1kHz
44.1kHz
44.1, 48kHz
No output produced*
3
DVD-Video
DVD-Audio
Video CD
Audio CD
MP3 CD
Super
Audio CD
Audio recording format
PCM
48kHz
96kHz
44.1kHz
48kHz
PCM
88.2kHz
96kHz
17 6.4kHz
19 2kHz
MPEG1
44.1kHz
MP3 (MPEG-1 Audio Layer 3)
DSD (Direct Stream Digital)
PCM Down Sample OFF
Copyright protected Not copyright protected
No output produced*
1
48kHz
No output produced 96kHz
No output produced*
2
44.1kHz
No output produced*
1
48kHz
No output produced 44.1kHz
No output produced 96kHz
No output produced 44.1kHz
No output produced 96kHz
44.1kHz
44.1kHz
44.1, 48kHz
No output produced*
3