User manual

73
Basic versionSimple version Information
ENGLISHDEUTSCHFRANÇAISITALIANOESPAÑOLNEDERLANDSSVENSKA
Advanced version
Operating learn function
n Delete remote control codes for each input
source
1
Press and hold down SET and
SOURCE SEL until the LEARN
indicator blinks.
2
Press and hold down HDMI and
press the learned input source
select buttons to be erased twice.
“ERASE” is shown in the remote control
display.
3
Press ENTER to continue erasing.
The indicator blinks twice and the
mode returns to LEARN mode.
• To cancel the erasing operation, do not
press
ENTER, and simply press any other
button.
• To return the normal mode, press SET.
Delete saved remote control codes
Codes can be erased in three ways: by buttons, sources, and by all
memory contents.
n Delete remote control codes for each button
1
Press and hold down SET and
SOURCE SEL until the LEARN
indicator blinks.
2
Press input source select buttons
to select the input source you
want to delete.
The input source is shown in the remote
control display.
3
Press and hold down HDMI and
press the learned button to be
erased twice.
“ERASE” is shown in the remote control
display, and the mode returns to learning
mode.
• To return the normal mode, press
SET.
n Delete remote control codes for all input
sources
1
Press and hold down SET and
SOURCE SEL until the LEARN
indicator blinks.
2
Press and hold down HDMI and
press ON and STANDBY .
LEARN indicator lights.
3
Press ENTER to continue erasing.
“ERASE” is shown in the remote
control display, and the mode returns
to learning mode.
• To cancel the erasing operation, do not
press
ENTER and simply press any other
button.
• To return the normal mode, press SET.
NOTE
Erasing codes will return to the factory preset code, or there will leave
empty if the button has no factory preset code.