R Model LC1500 User Guide LCD TV/Monitor
RECORD YOUR MODEL NUMBER (Now, while you can see it) The model and serial number of your new TV are located on the back of the TV cabinet. For your future convenience, we suggest that you record these numbers here: MODEL NO.____________________________________ SERIAL NO.____________________________________ WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Follow Instructions All operating and use instructions should be followed. 3. Retain Instructions The safety and operating instructions should be retained for future reference. 4. Heed Warnings All warnings on the product and in the operating instructions should be adhered to. 5. Cleaning Unplug this product from the wall outlet before cleaning.
IMPORTANT SAFETY INSTRUCTIONS (Continued from previous page) 14. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code (U.S.A.
2 3 6 10 2 Connecting Connecting Connecting Connecting antenna external equipment DVD player DTV 13 14 16 17 3 Connecting PC as monitor Function checking in PC mode 18 20 Using remote control Turning on the set Function checking in TV mode Setting language Closed caption function Parental control function Programming / Erasing channels 21 23 24 25 26 30 32 5 Setting Setting Setting Setting 34 36 38 40 6 Adjusting audio condition Adjusting video condition 41 44 7 Product specifications 46
Controls Front of the set On indicator Power button Remote control sensor * Remove vinyl coating for protection from staining before using.
INTRODUCTION Front control panel Volume buttons Menu button TV/Video button Power button Enter button Channel buttons On indicator Remote control sensor Connecting por ts DC 12V PC/DTV INPUT ANT IN +75 Ω Power input COMPONENT INPUT(480i) CB PC / D-TV input Antenna input CR H/P S-VIDEO VIDEO (MONO) L IN AUDIO R Audio/Video Headphone input jack S-Video input Component input 206-3652 7
Controls Remote Control POWER BUTTON NUMBER BUTTONS FLASHBK BUTTON MENU BUTTON CHANNEL (5,∞ ∞) BUTTONS TV/PC BUTTON ● Press the FLASHBK button to view the last programme you were watching.
INTRODUCTION TV/VIDEO b utton on Remote Control TV/VIDEO BUTTON PAGE 15~19 * Each press of this button changes the mode as below. CC BUTTON PAGE 28 MUTE BUTTON ENTER BUTTON PAGE 43 VIDEO DVD S-VIDEO * VIDEO, S-VIDEO, DVD : Select each mode for watching the corresponding external equipment.
Basic composition of LCD TV Accessor ies Hole Table style stand AC Adaptor Remote Control RC1500LC 1.5V 1.
* Please make sure to connect the power plug to the wall outlet socket after connecting the TV to the adaptor. a. Install the LCD TV in the correct using the installation accessories. Refer to page 12, 13. b. Connect the antenna cable to the antenna input port of the set. c. Connect the adaptor to the power input port of the set. d. Connect the power plug to the wall outlet socket after connecting the power cord to the adaptor.
Basic composition of LCD TV Installations * For safety, use with table style stand only. a. Place the table stand in the position you wish to install the set. b. Put the set in the table stand. * When you assemble the TV set with table style stand, please match the stick of TV set to the hole of the table style stand so as not to allow movement of the joint.
Connecting antenna * To get better picture quality, adjust the direction of antenna. Connecting to w all antenna soc k et CONNECTION ● In case of wall antenna socket in apartment houses, connect the antenna cable as shown below. (Use the correct type of antenna cable to the type of wall antenna socket.) Turn clock arise to tighten.
Connecting external equipment * TV screen is automatically converted to TV mode by pressing the channel (5 5,∞ ∞) buttons, flashbk or number buttons (0~9) when using VIDEO. * Please connect to other AV equipment by using input ports of the set. Connecting VCR 1 How to connect ● Connect the audio/video output ports of VCR to the corresponding input ports of the set.
Only w atching exter nal AV source ● Connect the audio/video output ports of external A/V equipment to the corresponding input ports of the set. DC 12V ANT IN +75 Ω PC/DTV INPUT COMPONENT INPUT(480i) CB H/P CR S-VIDEO VIDEO (MONO) L IN AUDIO R Camcorder < TV connection panel > VCR Video Game set < Back panel of external equipment > R AUDIO L VIDEO DVD 2 How to use ● Turn the set on and press TV/VIDEO button to select [VIDEO].
Connecting DVD player ● Connect component video inputs to Y, CB, CR (480i) and audio inputs to right and left port of AV ports. 1 How to connect DC 12V ANT IN +75 Ω PC/DTV INPUT COMPONENT INPUT(480i) CB H/P S-VIDEO CR VIDEO (MONO) L IN AUDIO R < TV connection panel > < Back panel of DVD > 2 R AUDIO L How to use ● Turn the set on and press TV/VIDEO button to select [DVD]. DVD < On remote control > ● Try this after turning on the DVD set.
Connecting DTV * Make sure to select PC mode before operating. DC 12V PC/DTV INPUT ANT IN +75 Ω COMPONENT INPUT(480i) CB H/P S-VIDEO CR VIDEO (MONO) L IN CONNECTION 1 How to connect AUDIO R < TV connection panel > R AUDIO L H V R G or B R AUDIO L < Back panel of DTV > 2 How to use ● Turn the set on and press TV/PC button to select [PC]. PC < On remote control > ● Try this after turning on the DTV set.
Connecting PC as monitor * Make sure to select PC mode on before operating. 1 How to connect ● Make sure to set resolution of the PC to be available before connecting. Refer to page 19. ● Connect the set to the PC with PC signal cable. ● Connect the audio ports to the PC to get PC sound.
2 How to use ● Turn the set on and press TV/PC button to select [PC]. PC CONNECTION PC < On remote control > ● Try this after turning on the PC. Displayable Monitor Specification MODE VGA SVGA (MAC) XGA Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 640x480 31.5KHz 60Hz 640x480 35KHz 67Hz 640x480 37.9KHz 72Hz 640x480 37.5KHz 75Hz 640x480 43.3KHz 85Hz 720x400 31.5KHz 70Hz 800x600 35.2KHz 56Hz 800x600 37.9KHz 60Hz 800x600 48.1KHz 72Hz 800x600 46.
Function checking in PC mode * Make sure to select PC mode on before operating. 1 Press the MENU button. Each time you press the button you can see menus as below. Contrast Brightness H-Poisition V-Poisition Clock Phase Auto Reset : : : : : : 71 74 0 0 40 16 Use 5∞2 3 And ENTER 2 Press the channel (5,∞ ∞) buttons to select a function you want to use.
Using remote control Inser ting batteries 2 Insert the batteries with correct polarity. 3 Replace the battery compartment cover. remote control sensor BASIC FUNCTIONS 1 Pull the battery cover upward in the arrow direction to remove. * Apply two 1.5V alkaline batteries of AAA type. Don’t mix the used batteries with new batteries. * Remove batteries when you don’t use the remote control for long time. Liquid leakage from old battery may cause operation failure.
Using remote control Notes f or using remote contr ol Make sure these are no objects between the remote control and its sensor. Don’t place the remote control near a heater or damp place. Strong impact on remote control may cause operation failure. Signal from the remote control may be disturbed by sun light or other strong light. In this case, turn the set to other direction.
Turning on the set * First, connect antenna cable and power cord with the adaptor. * Press the power button and you will get stable picture and sound in a few seconds. 1 Press the POWER button to turn the set on. displayed only in stereo signal ST. 7 channel number 12:30 PM displayed only if present time display is set BASIC FUNCTIONS 2 Press the channel (5,∞ ∞) or number buttons to select a channel you want after memorizing received broadcasting signals in the local area.
Function checking in TV mode 1 Press the MENU button. Each time you press the button you can see menus shown below.
Setting language Language 1 Press the MENU button to select the screen display as below. Language Captions Caption/Text Parental Ctl 3 Press the ENTER button. English Off CC1 Use 5∞2 3 And ENTER Language Captions Caption/Text Parental Ctl BASIC FUNCTIONS 2 Press the channel (5,∞ ∞) buttons to select a language you want to adjust. English Off CC1 Use 5∞2 3 And ENTER ● Each press of volume (2, 3) buttons changes the screen display as below.
Closed caption function Closed captioning is a process which converts the audio portion of a television program into written words which then appear on the television screen in a form similar to subtitles. Closed captions allow viewers to read the dialogue and narration of television programs. Using Closed Captions FOLLOW ME Captions are the subtitles of the dialogue and narration of television programs. For prerecorded programs, program dialogue can be arranged into captions in advance.
Oper ating the Caption 1 Press the MENU button to select the screen display as below. Language Captions Caption/Text Parental Ctl ● Each time you press the volume (2, 3) buttons, the caption mode is displayed one by one as shown below. English Off CC1 CAPTION CC1 CAPTION CC2 Use 5∞2 3 And ENTER CAPTION CC3 CAPTION CC4 BASIC FUNCTIONS 2 Press the channel (5 5,∞ ∞) buttons to select [Caption/Text].
Closed caption function Oper ating the Caption 1 Press the CC button to select [Captions]. Captions Off Use 2 3 And ENTER 2 Press the volume (2, 3) buttons to select [On] and press the ENTER button. ● Each press of volume (2, 3) buttons changes the screen display as below. Off On EZ Mute ● Captions function setting is Completed.
Using the Text Function 1 Repeat the steps 1-2 at page 27. 2 Press the volume (2, 3) buttons to select [Text 1], [Text 2], [Text 3] or [Text 4]. Language Captions Caption/Text Parental Ctl BASIC FUNCTIONS Text services give a wide variety of information on all kind of subjects (ex. captioned program lists, weather forecasts, stock exchange topics, news for hearing-impaired---) through the half TV screen. But not all stations offer text services, even though they might offer captioning.
Parental control function The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcast station. The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and by the categories chosen to be blocked. It is also possible to block all program viewing for a time period. To use the Parental Control Function, the following must be set : 1. Ratings and categories to be blocked. 2.
Setting up Bloc king Language Captions Caption/Text Parental Ctl 4 English Off CC1 2 Language Captions Caption/Text Parental Ctl Press the MENU button to return from [Age Block] or [Content Blk] setting screens. 5 English Off CC1 Use 5∞2 3 And ENTER 3 the channel (5,∞ ∞) buttons to the types of blocking to be set. the volume (2, 3) buttons to the types of ratings to block. ● [MPAA], [Age] and/or [Content block] may be set.
Programming / Erasing channels Auto prog r amming channels * This function can be operated only when the set can receive input signal from broadcasting stations and the antenna cable is connected. * [Auto programming] function memorizes all the receiving channels of terestrial TV signals or cable TV programs.
Right master page Memor izing / Er asing current channel *You can select [Add] or [Del] for the current channel. 1 Press the MENU button to select the screen display as below. Then press the channel (5,∞ ∞) buttons to select [Manual Program]. 3 Press select press select the channel (5,∞ ∞) buttons to a channel you want and then the volume (2, 3) buttons to [Memory] or [ Erase ].
Setting current time * If current time setting is erased by power failure or TV is unplugged, reset it. To set current time as 10:30 AM 1 Press the MENU button to select the screen display as below. Clock --:--AM --:--AM Hold Off-Timer --:--AM On-Timer TV 3 Vol 30 Run Auto Off : Hold Use 5∞2 3 And ENTER 2 Press the channel (5,∞ ∞) buttons to select [Clock ]. Clock --:--AM --:--AM Hold Off-Timer --:--AM On-Timer TV 3 Vol 30 Run Auto Off : Hold Use 5∞2 3 And ENTER 3 Press the volume (3) button.
5 ●If you hold the 3 button, the hour display is changed in the sequence of AM 1 ➔ AM 2 ➔ ....PM12 ➔ PM 1 .... ➔ AM 12, and changed in the reverse sequence for ∞ button. ● Select [AM 10]. ● Press the ENTER button. ST.SAP 7 10:30AM Use 5∞2 3 And ENTER Press the channel (5,∞ ∞) buttons to select current minute. And press the ENTER button. current channel current sound status Press the volume (3) button.
Setting Off-Timer function *Timer function can be operated only if current time has been already set. *Off-timer function is prior to on-timer function if they are set to the same time. Tur ning off at 11:30 PM by off-timer function 1 Press the MENU button to select the screen display as below. Clock 10:30AM --:--AM Hold Off-Timer --:--AM On-Timer TV 3 Vol 30 Run Auto Off : Hold Use 5∞2 3 And ENTER 2 Press the channel (5,∞ ∞) buttons to select [OffTimer].
5 ● If you hold the 5 button, the hour display is changed in the sequence of AM 1 ➔ AM 2 ➔ ....PM12 ➔ PM 1 .... ➔ AM 12, and changed in the reverse sequence for ∞ button. ● Select [PM 11]. 7 Press the volume (3) button to select [Hold] or [Run]. 8 Press the channel (5,∞ ∞) buttons to select [Run]. Clock 10:30AM 11:00PM --:--AM Hold Off-Timer Hold --:--AM On-Timer TV 3 Vol 30 Run Auto Off : Hold Press the volume (3) button.
Setting On-Timer function *Timer function can be operated only if current time has been already set. Tur ning on at 7:10 AM with volume 40 on channel 8 by on-timer function 1 Press the MENU button to select the screen display as below. 4 Press the channel (5 ∞) buttons to 5,∞ select hour you want. ● If you hold the 5 button, the hour display is changed in the sequence of AM 1 ➔ AM 2 ➔ ....PM12 ➔ PM 1 .... ➔ AM 12, and changed in the reverse sequence for ∞ button. ● Select [AM 7].
7 8 Press the volume (3) button. 11 Press the volume (3) button. Clock 10:30AM --:--AM Hold Off-Timer --:--AM 7:10AM On-Timer TV 3 Vol 30 Run Auto Off : Hold Clock 10:30AM --:--AM Hold Off-Timer 7:10AM On-Timer --:--AM TV 8 3 Vol 40 30 Run Auto Off : Hold Use 5∞2 3 And ENTER Use 5∞2 3 And ENTER Press the channel (5,∞ ∞) buttons to select the channel you want . 12 Press the channel (5,∞ ∞) buttons to select [Run] and press the ENTER button.
Setting sleep time function * This function will automatically turn the set off after a set time. 1 Press the SLEEP button to set sleep time function. ● Each press of the button changes setting time status as below. Sleep --- Use 2 3 And ENTER --- 10 240 20 180 30 120 90 60 ● To release sleep time setting, press the SLEEP button repeatedly to select [ --- ]. ● The screen display of [ Sleep ] appears on the screen for one minute untill automatically turning off.
Adjusting audio condition Adjusting audio condition b y user 1 Press the MENU button to select the screen display as below. MTS AVL DASP Equalizer 3 Strero Off User MTS AVL DASP Equalizer Use 2 35∞ And ENTER 2 Press the channel (5,∞ ∞) buttons to select a audio item you want to adjust. Press the volume (2, 3) buttons to adjust the audio condition as you want. Strero Off User Use 2 35∞ And ENTER 4 Press the ENTER button. MTS : ● Refer to page 42 for the details.
Adjusting audio condition Selecting bilingual signals Screen display in stereo signal : Stereo Screen display in bilingual signal : SAP * Bilingual (dual language) signal ● ● ● ● ● 1 This signal contains the secondary language signal in addition to the primary language. There are the primary and secondary language and stereo modes in bilingual signal. [Mono] : The primary language is output from left and right speaker. Signal mode is mono.
Mute * This function cuts off speaker sound. It’s convenient when getting phone calls. 1 Press the MUTE button. Mute ● To release muted sound, press the MUTE button or volume (2, 3) buttons. ● If muted sound is released, volume level is displayed on the screen. Using headphone AUDIO / VIDEO ● Headphone is an optional item. ● You can adjust headphone sound with volume(2, 3) buttons. While you are listening to sound through headphone, speaker sound is cut off.
Adjusting video condition APC (Auto Picture Control) 1 Press the MENU button to select the screen display as below. Contrast Brightness Color Tint Sharpness APC 100 100 70 0 4 Clear Use 5∞2 3 And ENTER 2 Press the channel (5,∞ ∞) buttons to select [APC]. Contrast Brightness Color Tint Sharpness APC 100 100 70 0 4 Clear Use 5∞2 3 And ENTER ● Each press of volume (2, 3) buttons changes the screen display as below. 3 Clear Optimum User Soft Press the ENTER button.
Man ual picture control 1 Press the MENU button to select the screen display as below. Contrast Brightness Color Tint Sharpness 3 100 100 70 0 4 Press the volume (2, 3) buttons to adjust the picture condition as you want. Contrast Brightness Color Tint Sharpness Use 5∞2 3 And ENTER 100 100 70 0 4 Use 5∞2 3 And ENTER ● [Contrast], [Brightness], [Color] are adjusted from 0 to 100. ● [Tint] is adjusted from Red 50 to Green 50. ● [Sharpness] is adjusted from 0 to 10.
Product specifications Model : LC1500 Main body : Horizontal size (mm) Height (mm) Thickness (mm) Weight (kg) : 394 : 384 : 105.5 : 5.2 Including table stand : Horizontal size (mm) Height (mm) Thickness (mm) Weight (kg) : 394 : 413 : 194 : 7.9 : DC 12V/3A Power requirements * CAUTION : For use only with Model No. CAM-1230 AC Adaptor, manufactured by Chang-Nam Electronics.
Memo 206-3652
COUNTRY ALGERIE ARMENIA AUSTRALIA AUSTRIA BAHREIN BANGLADESH BELGIUM BULGARIA CANADA CHINA CYPRUS CZECH REPUBLIC DENMARK DUBAI EGYPT ESTONIA F.Y.R.O.M. FINLAND FRANCE GERMANY GREECE HEADQUARTERS EUROPE: HONG KONG HUNGARY ICELAND INDIA IRAN IRELAND ISRAEL ITALY IVORY COAST JAPAN KOREA KUWAIT LATVIA LEBANON LITHUANIA MALAYSIA MALTA MAURITIUS MILITARY MARKET EUROPE NETHERLANDS NEW ZEALAND NORWAY OMAN POLAND PORTUGAL PROFESSIONAL EUROPE PROFESSIONAL U.S.A.
