Operation Manual

Appendix

SettingsPlaybackConnections

Contents

Front panel Rear panel IndexRemote

Tips

Simple operations in the power o state

•When a input source select buttons, 1/3, FAVORITES CALL or 5 button is pressed, the operation is performed at the same time as the unit switches

on (vpage28, 30, 53).

•When the Network Control function is set to “On”, you can perform playback, or other operations through AirPlay, App or the web control function

(vpage62, 67, 87).

Simple operations for iPod/USB

•When connected to the Front USB, the Input Source automatically changes and playback begins (vpage56).

I only want to recharge my iPod

•Connect the iPod to this unit when the unit power is on. Then turn the unit power o, and the iPod will continue to charge until fully charged

(vpage58).

•When connected to the rear USB, the iPod can be charged without the current Input Source changing (vpage56).

Specifying the iPod track with the alarm function

•In the power o state after setting the alarm, pause the iPod playback of the track you want to use (vpage82).

•When using alarm playback on an iPod touch or iPhone, set the iPod touch or iPhone to “Sleep” mode. If the power is switched o using the power o

operation, alarm playback cannot be used.

Specifying the desired track with the alarm function

•After registering the desired track in NAS, etc., register the track in the favorites and then specify the track in the alarm settings (vpage82).

Change to summer time

•Select Setup – “General” – “Clock” and conﬁgure the settings (vpage83).

Changing or resetting the network environment

•Prepare the provided Quick Setup Guide, and run Setup – “Quick Setup”. For detailed settings, run Setup – “Network” – “Settings” (vpage88).

I want to set the optimized listening environment after changing the conﬁguration/position of the speakers or

changing a speaker to a new one.

•Select Setup – “General” – “Speaker Conﬁguration” – Response and conﬁgure the settings (vpage83).