Owner's Manual
Table Of Contents
- Quick Setup Guide
- Owners Manual
- Reset
- Features
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Connections
- Playback
- Basic Operation
- Playing CDs
- Playing DATA CDs
- Listening to Internet Radio
- Playing back files stored on a PC and NAS
- Listening to Pandora
- Listening to SiriusXM Internet Radio
- Listening to Spotify
- Listening to FM/AM Broadcasts
- Favorite Function
- Playing iPod
- Playing a USB memory device
- Listening to ANALOG IN
- Listening to DIGITAL IN
- AirPlay Function
- Remote Play Function
- Web Control Function
- Other Functions
- Settings
- Last Function Memory
- Tips
- Troubleshooting
- Specs
- Glossary
- Index
- Scan of CD-ROM
- Warranty
108
TipsSettingsPlaybackConnections
Contents
Front panel Rear panel IndexRemote
Appendix
About Discs
2 Discs playable on this unit
q Music CDs
Discs marked with the logo below can be played in this unit.
w CD-R/CD-RW
NOTE
•Discs in special shapes (heart-shaped discs, octagonal discs, etc.) cannot be
played. Do not attempt to play them, as doing so can damage the unit.
•Some discs and some recording formats cannot be played.
•Non-finalized discs cannot be played.
•What is finalization?
•Finalization is the process that makes recorded CD-R/CD-RW discs playable on
compatible players.
2 Holding discs
Do not touch the signal surface.
2 Loading discs
•Place the disc in the tray, label side up.
•Make sure the disc tray is fully open when inserting the disc.
•Place the discs flat, 12 cm discs in the outer tray guide (Figure 1),
8 cm discs in the inner tray guide (Figure 2).
Figure 1
12 cm disc
8 cm disc
Outer tray guide
Inner tray guide
Figure 2
•Place 8 cm discs in the inner tray guide without using an adapter.
%
•“Unsupported” is displayed if a disc that cannot be played is loaded.
•“No Disc” is displayed if the disc is loaded upside-down or if no disc is loaded.
NOTE
•Do not push the disc tray in by hand when the power is turned o.
•Doing so could damage the set.
•If the unit is left in a room full of smoke from cigarettes, etc., for long periods
of time, the surface of the optical pickup may get dirty, preventing it from
receiving signals properly.