Owner's Manual

o
Bluetooth cannot be played back
Symptom Cause / Solution Page
Bluetooth devices cannot
be connected to this unit.
0
The Bluetooth function in the Bluetooth device has not been enabled. See the Owner’s Manual of the
Bluetooth device to enable the Bluetooth function.
－
0
Bring the Bluetooth device near to this unit. －
0
The Bluetooth device cannot connect with this unit if it is not compatible with the A2DP profile. －
0
Turn the power of the Bluetooth device off and on again, and then try again. －
0
Set “Network Control” to “On” and connect again. 108
NFC connection fails
0
Check the NFC settings on each Bluetooth device. －
0
Cancel the Lock function on each Bluetooth device. －
0
Check the NFC position on each Bluetooth device, and then move the NFC close to Q on this unit.
64
0
Set “Network Control” to “On” and connect again. 108
The sound is cut off.
0
Bring the Bluetooth device near to this unit. －
0
Remove obstructions between the Bluetooth device and this unit. －
0
To prevent electromagnetic interference, locate this unit away from microwave ovens, wireless LAN
devices and other Bluetooth devices.
－
0
Reconnect the Bluetooth device. －
Contents Connections Playback Settings Tips Appendix
127
Front/Top
panel
Rear panel
Remote control
unit
Index