User's Manual

Clock
o
Set the current time
You can automatically adjust the clock of this unit using the Internet.
0
To use this function, the unit must be connected to the Internet.
1
Use ui to select your time zone (Time Zone), then
press ENTER.
0
The Time Zone setting is also applied to the Time Zone setting in
“Firmware”–“Auto-Update” in the menu. (v p. 99)
2
Use ui to select the DST (Daylight Saving Time), then
press ENTER.
On:
Set the DST (Daylight Saving Time) to
on.
Off
(Default):
Set the DST (Daylight Saving Time) to
off.
3
Use ui to select the day of the week, then press
ENTER.
Clock Mode
You can display the time when in standby by setting the Clock Mode.
On: Time is displayed in standby.
Off
(Default):
Time is not displayed in standby.
0
When in standby and “Clock Mode” is set to “On”, the unit consumes more
standby power than when in normal standby.
Contents Connections Playback Settings Tips Appendix
95
Front panel Rear panel
Remote control
unit
Index