Operation Manual

143
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
Tone
Adjust the tonal quality of the sound.
2 Tone Control
Set the tone control function to “On” and “O”.
On : Allow tone adjustment (bass, treble).
O (Default) : Playback without tone adjustment.
2 Bass
Adjust bass.
–6dB – +6dB (Default : 0 dB)
2 Treble
Adjust treble.
–6dB – +6dB (Default : 0 dB)
%
•This cannot be set when the sound mode is set to “DIRECT” or “PURE
DIRECT”.
M-DAX
Compressed audio formats such as MP3, WMA (Windows Media Audio)
and MPEG-4 AAC reduce the amount of data by eliminating signal
components that are hard for the human ear to hear. The “M-DAX”
function generates the signals eliminated upon compression, restoring the
sound to conditions near those of the original sound before compression.
It also restores the original bass characteristics for a rich and expanded
tonal range.
2 Mode
Set the mode for “M-DAX”.
High : Optimized mode for compressed sources with very weak highs
(64 kbps and under).
Medium : Apply suitable bass and treble boost for all compressed
sources (96 kbps and under).
Low : Optimized mode for compressed sources with normal highs (96
kbps and over).
O (Default) : Do not use “M-DAX”.
%
•This item can be set with analog signals or PCM signal (Sample Rate =
44.1/48 kHz) is input.
•“M-DAX” settings are stored for each input source.
•This cannot be set when the sound mode is set to “DIRECT” or “PURE
DIRECT”.
•This can also be set by pressing M-DAX on the main unit.
•The M-DAX indicator lights.