User guide

17
ENGLISH
Getting Started Connections
Basic OperationsBasic Operations Advanced Operations TroubleshootingExplanation termsInformation Specifi cations Index
Presetting FM/AM stations manually
This unit can be preset with a total of 99 DAB, FM and AM broadcast
stations.
1
Tune in the station you want to preset.
2
Press [ENTER/MEMO] or <ENTER>.
The preset menu is displayed.
3
Use ui to select “Add to Preset”, then press
[ENTER/MEMO], <ENTER> or p.
4
Use ui to select the number to be preset, then press
[ENTER/MEMO] or <ENTER>.
The reception frequency and reception mode are preset and the
display switches to the station name input display.
5
Input the station name.
“Inputting characters” (vpage35)
• If you do not want to input a station name, press [ENTER/
MEMO]
or <ENTER> without inputting anything else.
• If you make a mistake when inputting, perform the procedure
again. Whatever was previously input is overwritten.
6
Press [ENTER/MEMO] or <ENTER>.
The characters you have input are entered.
• To give names to other stations, repeat steps 1 to 5.
Listening to preset stations
Use [NUMBER] (0 – 9, +10) or [CH df] to select the
preset number.
Tuner playback
Listening to DAB/DAB+
n About DAB (Digital Audio Broadcasting) (vpage41)
n About DAB+ (vpage41)
Tuning in DAB stations
1
Press [TUNER] to select “DAB”.
• When a DAB operation is performed for the fi rst time after
purchase, auto scanning is performed automatically.
2
Press [TU +, TU –] to select the desired broadcast
station.
• The broadcast stations are displayed in the order in which they
were scanned.
DAB stations can be stored in the preset memory and played in the
same way as FM/AM stations.
• “Presetting FM/AM stations manually” (vpage17)
• “Listening to preset stations” (vpage17)
Auto scannig broadcast stations
Connect the antenna beforehand.
1
Press [SEARCH] during DAB reception.
2
Use ui to select “Start”, then press [ENTER/
MEMO]
, <ENTER> or p.
After “Searching” is displayed, “_ _Stations” is displayed.
Calling stations reqistered in Preset List
1
Press [ENTER/MEMO] or <ENTER>.
“Preset Menu” appears.
2
Use ui to select “Call Preset”, then press [ENTER/
MEMO]
, <ENTER> or p.
The Preset list appears.
3
Use ui to select Preset List, then press [ENTER/
MEMO]
, <ENTER> or p.
The respective function starts up and playback starts.
Deleting stations registered in Preset List
1
Press [ENTER/MEMO] or <ENTER>.
“Preset Menu” appears.
2
Use ui to select “Delete Preset”, then press
[ENTER/MEMO], <ENTER> or p.
The Preset list appears.
3
Use ui to select Preset List, then press [ENTER/
MEMO]
, <ENTER> or p.
4
When the prompt “Delete?” appears, press [ENTER/
MEMO]
or <ENTER>.
• To cancel the operation, press o.
1.M-CR603N_ENG_0728.indd 171.M-CR603N_ENG_0728.indd 17 2010/07/29 20:39:222010/07/29 20:39:22