Owner's Manual
Table Of Contents
- Owner’s Manual
- Resetting network settings
- Contents
- Accessories
- Features
- Part names and functions
- Connections
- Playback
- Basic operation
- Listening to Internet Radio
- Playing back files stored on PC or NAS
- Playing a USB memory device
- Listening to music on a Bluetooth device
- Listening to music on a Bluetooth device
- Getting the HEOS App
- Playing CDs
- Playing DATA CDs
- Listening to FM/AM broadcasts
- Playing digital input
- Playing analog input
- AirPlay function
- Spotify Connect function
- Convenience functions
- Settings
- Tips
- Troubleshooting
- Power does not turn on / Power is turned off
- LED is flashing
- Operations cannot be performed through the remote control unit
- Display on this unit shows nothing
- No sound comes out
- Sound is interrupted or noise occurs
- Desired sound does not come out
- AirPlay cannot be played back
- USB memory devices cannot be played back
- File names on the USB memory device are not displayed properly
- Bluetooth cannot be played back
- The Internet radio cannot be played back
- Music files on PC or NAS cannot be played back (Music server)
- Various online services cannot be played
- Cannot connect to a wireless LAN network
- Cannot playback Discs
- Audio from digital devices cannot be played back (Optical)
- The input source switches to “Optical In 1” or “Optical In 2”
- Update/upgrade error messages
- Resetting network settings
- Troubleshooting
- Appendix
- Playing back Discs
- Playback order of music files
- About discs and files
- Playing back a USB memory devices
- Cautions on using media
- DIGITAL IN
- Playing back a Bluetooth device
- Playing back files stored on a PC and NAS
- Playing back Internet Radio
- Last function memory
- Explanation of terms
- Trademark information
- Specifications
- Index
- License
Network
To use this unit by connecting it to a home network (LAN), you must configure network settings.
If you set up your home network (LAN) via DHCP, set “DHCP” to “On”. (Use the default setting.) This allows this unit to use your home network (LAN).
When assigning an IP address to each device manually, you need to assign an IP address to this unit using the “IP Address” settings, and enter
information about your home network (LAN) such as the gateway address and subnet mask, etc.
Network Information
Displays network information.
Friendly Name / Connection / SSID (Wi-Fi Signal Strength) / DHCP /
IP Address / MAC Address (Ethernet) / MAC Address (Wi-Fi)
Wi-Fi
The Wi-Fi function can be stopped to prevent noise that affects the sound
quality. Using a wired LAN to connect this unit to the network enables
playback with a high sound quality.
Enabled
(Default):
Enables the Wi-Fi function.
Disabled: Disables the Wi-Fi function.
Bluetooth
Stopping Bluetooth function reduces a source of noise that affects sound
quality, enabling higher sound quality playback.
Enabled
(Default):
Enables the Bluetooth function.
Disabled: Disables the Bluetooth function.
Contents Connections Playback Settings Tips Appendix
103
Front panel Rear panel
Remote control
unit
Index