Owner's Manual
Table Of Contents
- Owner’s Manual
- Resetting network settings
- Contents
- Accessories
- Features
- Part names and functions
- Connections
- Playback
- Basic operation
- Listening to Internet Radio
- Playing back files stored on PC or NAS
- Playing a USB memory device
- Listening to music on a Bluetooth device
- Listening to music on a Bluetooth device
- Getting the HEOS App
- Playing CDs
- Playing DATA CDs
- Listening to FM/AM broadcasts
- Playing digital input
- Playing analog input
- AirPlay function
- Spotify Connect function
- Convenience functions
- Settings
- Tips
- Troubleshooting
- Power does not turn on / Power is turned off
- LED is flashing
- Operations cannot be performed through the remote control unit
- Display on this unit shows nothing
- No sound comes out
- Sound is interrupted or noise occurs
- Desired sound does not come out
- AirPlay cannot be played back
- USB memory devices cannot be played back
- File names on the USB memory device are not displayed properly
- Bluetooth cannot be played back
- The Internet radio cannot be played back
- Music files on PC or NAS cannot be played back (Music server)
- Various online services cannot be played
- Cannot connect to a wireless LAN network
- Cannot playback Discs
- Audio from digital devices cannot be played back (Optical)
- The input source switches to “Optical In 1” or “Optical In 2”
- Update/upgrade error messages
- Resetting network settings
- Troubleshooting
- Appendix
- Playing back Discs
- Playback order of music files
- About discs and files
- Playing back a USB memory devices
- Cautions on using media
- DIGITAL IN
- Playing back a Bluetooth device
- Playing back files stored on a PC and NAS
- Playing back Internet Radio
- Last function memory
- Explanation of terms
- Trademark information
- Specifications
- Index
- License
Settings
Configure the IP address.
0
If you are using a broadband router (DHCP function), the information
required for network connection such as the IP address will be
automatically configured since the DHCP function is set to “On” in the
default settings of this unit.
0
Set up the IP Address, Subnet Mask, Gateway and DNS server
information only when assigning a fixed IP address or when connecting
to a network without DHCP function.
o
DHCP
Selects how to connect to the network.
On
(Default):
Configure the network settings
automatically from your router.
Off: Configure the network settings manually.
o
IP Address
Set the IP address within the ranges shown below.
0
The Network Audio function cannot be used if other IP addresses
are set.
CLASS A: 10.0.0.1 - 10.255.255.254
CLASS B: 172.16.0.1 - 172.31.255.254
CLASS C: 192.168.0.1 - 192.168.255.254
o
Subnet Mask
When connecting an xDSL modem or connector adapter directly to
this unit, input the subnet mask indicated in the documentation
supplied by your provider. Normally input 255.255.255.0.
o
Gateway
When connected to a gateway (router), input its IP address.
o
DNS
Enter the DNS address indicated in the documentation supplied by
your provider.
o
Save
Save settings
0
If you cannot connect to the Internet, recheck the connections and settings.
(v p. 32)
0
If you do not understand about Internet connection, contact your ISP (Internet
Service Provider) or the store from which you purchased your computer.
Contents
Connections Playback Settings Tips Appendix
108
Front panel Rear panel
Remote control
unit
Index