Owner's Manual
Table Of Contents
- Owner’s Manual
- Resetting network settings
- Contents
- Accessories
- Features
- Part names and functions
- Connections
- Playback
- Basic operation
- Listening to Internet Radio
- Playing back files stored on PC or NAS
- Playing a USB memory device
- Listening to music on a Bluetooth device
- Listening to music on a Bluetooth device
- Getting the HEOS App
- Playing CDs
- Playing DATA CDs
- Listening to FM/AM broadcasts
- Playing digital input
- Playing analog input
- AirPlay function
- Spotify Connect function
- Convenience functions
- Settings
- Tips
- Troubleshooting
- Power does not turn on / Power is turned off
- LED is flashing
- Operations cannot be performed through the remote control unit
- Display on this unit shows nothing
- No sound comes out
- Sound is interrupted or noise occurs
- Desired sound does not come out
- AirPlay cannot be played back
- USB memory devices cannot be played back
- File names on the USB memory device are not displayed properly
- Bluetooth cannot be played back
- The Internet radio cannot be played back
- Music files on PC or NAS cannot be played back (Music server)
- Various online services cannot be played
- Cannot connect to a wireless LAN network
- Cannot playback Discs
- Audio from digital devices cannot be played back (Optical)
- The input source switches to “Optical In 1” or “Optical In 2”
- Update/upgrade error messages
- Resetting network settings
- Troubleshooting
- Appendix
- Playing back Discs
- Playback order of music files
- About discs and files
- Playing back a USB memory devices
- Cautions on using media
- DIGITAL IN
- Playing back a Bluetooth device
- Playing back files stored on a PC and NAS
- Playing back Internet Radio
- Last function memory
- Explanation of terms
- Trademark information
- Specifications
- Index
- License
o
Selecting speakers to output audio
You can set up this unit to output audio from Speaker A, Speaker B, or
both.
1
Press SPEAKER A/B.
The current setting is displayed.
2
Press SPEAKER A/B repeatedly to select the setting.
0
The setting changes each time SPEAKER A/B is pressed.
Speaker A = On :
Outputs audio from Speaker A only.
Speaker B = On :
Outputs audio from Speaker B only.
Both Speakers A and B = On :
Outputs audio from both Speaker A and Speaker B.
0
When using the multi-drive connection, set “Speaker Configuration” – “Amplifier
Mode” in the settings menu to “Standard (A, B, or A+B)”. (v p. 92)
o
Specifying speakers to adjust the volume
When 2 sets of speakers (Speaker A/Speaker B) are connected, either
Speaker A or Speaker B can be selected for volume adjustment.
1
Press VOLUME A/B.
The speakers whose volume is to be adjusted are shown in the unit
display.
2
Use VOLUME df to adjust the volume.
0
This is only enabled when “Both Speakers A and B = On” is set for the audio
output speakers.
Contents Connections Playback Settings Tips Appendix
82
Front panel Rear panel
Remote control
unit
Index