Contents Connections Playback Settings Tips Appendix Network Receiver M-CR510 You can print more than one page of a PDF onto a single sheet of paper.
Contents Connections Playback Settings Tips Appendix Contents Playback Accessories························································································· 5 Inserting the batteries······································································· 6 Operating range of the remote control unit······································ 6 Features······························································································· 7 Multiple music formats are supported, all in
Contents Connections Playback Settings Listening to music on an iPod························································· 43 Setting operation mode (Remote iPod Mode)································ 44 Charging the iPod············································································ 45 Playing a USB memory device··················································· 46 Playing files stored on USB memory devices································· 47 Listening to ANALOG IN······················
Contents Connections Playback Settings Tips Tips Contents···························································································· 75 Tips·································································································· 76 Troubleshooting·············································································· 77 Resetting factory settings···························································· 87 Appendix Playing back USB memory devices···················
Contents Connections Playback Settings Tips Appendix Thank you for purchasing this Marantz product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference. Accessories Check that the following parts are supplied with the product.
Contents Connections Playback Settings Inserting the batteries Operating range of the remote control unit q Remove the rear lid in the direction of the arrow and remove it. w Load the two batteries properly as indicated by the q and w marks in the battery compartment. Point the remote control unit at the remote sensor when operating it. R03/AAA Approx. 7 m 30° e Put the rear cover back on.
Contents Connections Playback Settings Tips Appendix Features Multiple music formats are supported, all in a compact form factor Easy operation • Easy wireless connection is possible by pressing the Wi-Fi CONNECT button (WPS and Wi-Fi Sharing) See the separate “Quick Setup Guide”. • Supports Internet Radio and music streaming Supports AirPlay® (vpage 49) You can enjoy a wide variety of content, including listening to Internet Radio, playing audio files stored on your PC.
Contents Connections Playback Settings Appendix Tips Part names and functions Front panel Q2 Q0 Q1 q Front panel w Rear panel o e r 8 Remote t y Index i u
Contents Connections Playback Q0 o i Q2 Q1 Settings Tips Appendix t Headphones jack (PHONES) Used to connect headphones. When the headphones are plugged into this jack, audio will no longer be output from the connected speakers. NOTE • To prevent hearing loss, do not raise the volume level excessively when using headphones. y Volume up/down button (VOLUME df) Adjusts the audio volume. q w e rt y u USB port (Front) u Used to connect iPod or USB memory devices (vpage 19).
Contents Connections Playback Settings Tips Appendix Rear panel i q Front panel w Rear panel 10 e Remote u y t r Index
Contents Connections Playback i u Settings Tips Appendix y USB port (Rear) y Used to connect iPod or USB memory devices (vpage 19). u DIGITAL IN connector Used to connect devices equipped with digital audio connector (vpage 18). i Wi-Fi CONNECT button Used to connect to the wireless LAN. (See the separate “Quick Setup Guide”.) q w e r t q AC inlet (AC IN) Used to connect the power cord (vpage 23). w Speaker terminals (SPEAKERS) Used to connect speakers (vpage 16, 17).
Contents Connections Playback Settings Tips Appendix Remote control unit q w e q Remote control signal transmitter r e SLEEP button This transmits signals from the remote control unit (vpage 6). w CLOCK button The current time appear on the unit (vpage 67). This sets the sleep timer (vpage 61). r Input source select buttons These select the input source (vpage 25). t t System buttons y These perform playback related operations (vpage 28, 32, 34, 37, 44, 47).
Contents Connections Playback Settings Tips Appendix u FAVORITES ADD / CALL buttons • To add radio stations or files to the favorite list, press ADD. • To call up a radio station or file registered in the favorite list, press CALL (vpage 40). Q5 Q6 i TOP MENU button To back to the top of the menu (vpage 64). o ENTER button This determines the selection (vpage 64). Q0 Cursor buttons (uio p) These select items (vpage 64). Q1 SEARCH button This displays the search menu (vpage 28, 47).
Contents Connections Playback Settings Tips Appendix Q7 DBB/TONE button Adjusting the tone (vpage 60). Q8 VOLUME buttons (df) These adjust the volume level (vpage 26). Q9 Information button (INFO) This switches display items such as the album name and title name in the playback screen (vpage 32, 34, 44, 46). W0 SETUP button This displays the setup menu on the display (vpage 64). W1 CLEAR button This cancels the settings (vpage 41, 65).
Contents Connections Playback Settings Tips Appendix Connections 22Cables used for connections Speaker connection (vpage 16) Provide necessary cables according to the devices you want to connect.
Contents Connections Playback Settings Tips Appendix Speaker connection Here we connect the speakers in the room to this unit. This section explains how to connect them using typical examples. Connecting the speaker cables Carefully check the left (L) and right (R) channels and + (red) and – (black) polarities on the speakers being connected to this unit, and be sure to connect the channels and polarities correctly.
Contents Connections Playback Settings Connection the subwoofer Tips Speaker connection Use a subwoofer cable to connect the subwoofer.
Contents Connections Playback Settings Connecting an analog device Connecting a digital device Analog device Front panel Rear panel Appendix Tips Digital device AUDIO AUDIO AUDIO OUT R L OPTICAL OUT R L R L 18 Remote Index
Contents Connections Playback Settings Appendix Tips Connecting an iPod or USB memory device to the USB port To connect an iPod to this unit, use the USB adapter cable that was supplied with the iPod. For operating instructions see “Playing iPod” (vpage 42) or “Playing a USB memory device” (vpage 46). iPod USB memory device Front Rear or % • Marantz does not guarantee that all USB memory devices will operate or receive power.
Contents Connections Playback Settings Tips 22Supported iPod / iPhone models • iPod classic • iPod nano • iPod touch • iPhone Front panel Rear panel 20 Remote Index Appendix
Contents Connections Playback Settings Appendix Tips Connecting to a home network (LAN) You can connect this unit to your home network (LAN) to perform various types of playbacks and operations as follows.
Contents Connections Playback Settings Wireless LAN Appendix % • With this unit, it is possible to use the DHCP and Auto IP functions to make the network settings automatically. • When using this unit with the broadband router’s DHCP function enabled, this unit automatically performs the IP address setting and other settings. When using this unit connected to a network with no DHCP function, make the settings for the IP address, etc., at “Network” (vpage 71).
Contents Connections Playback Settings Tips Connecting the power cord After completing all the connections, insert the power plug into the power outlet.
Contents Connections Playback Settings Tips Appendix Playback Turning the power on (vpage 25) Playing a USB memory device (vpage 46) Selecting the input source (vpage 25) Listening to ANALOG IN (vpage 48) Adjusting the master volume (vpage 26) Listening to DIGITAL IN (vpage 48) Turning off the sound temporarily (vpage 26) AirPlay function (vpage 49) Listening to Internet Radio (vpage 27) Remote play function (vpage 52) Playing back files stored on a PC and NAS (vpage 30) Web control functio
Contents Connections Playback Settings Tips Appendix Basic operation Turning the power on POWER X 1 Input source select buttons Press POWER X to turn on power to the unit. % • You can also switch the power to standby by pressing X on the main unit. Selecting the input source 1 VOLUME df MUTE Press the input source select button to be played back. The desired input source can be selected directly. % • Press the AUX again to switch between Analog In / Digital In.
Contents Connections Playback Settings Tips Adjusting the master volume 1 Use VOLUME df to adjust the volume. The volume level is displayed. % • You can also adjust the master volume by turning VOLUME df on the main unit. Turning off the sound temporarily 1 Press MUTE . The “MUTING” is displayed. % • To cancel, press MUTE Front panel again.
Contents Connections Playback Settings Tips Appendix Listening to Internet Radio • Internet Radio refers to radio broadcasts distributed over the Internet. Internet Radio stations from around the world can be received. • The broad cast station types and specifications supported by this unit for playback are as follows.
Contents Connections Playback Settings Listening to Internet Radio Prepare for playback. 2 3 Press INTERNET RADIO. 4 • Check the network environment, then turn on this unit’s power (vpage 21 “Connecting to a home network (LAN)”). zzzzz (Country name) : • Displays typical Internet Radio stations your country. Search Stations : • Displays all Internet Radio stations that this unit can tune in to. Search Podcasts : • Displays Internet Radio stations in the podcasts that this unit can tune in to.
Contents Connections Playback Settings Playing the last played Internet Radio station 1 Press INTERNET RADIO. The source switches to “Internet Radio” and the last played radio station plays. There are many Internet Radio stations in the world, and this unit can tune into these stations. But finding the radio station you want to hear may be difficult, because there are too many stations.
Contents Connections Playback Settings Tips Appendix Playing back files stored on a PC and NAS • This unit can play back music files and playlists (m3u, wpl) stored on a PC and on Network Attached Storage (NAS) that supports DLNA. • The network audio playback function of this unit connects to the server using technologies shown below. • Windows Media Player Network Sharing Service • Windows Media DRM10 • This unit can play back the following files.
Contents Connections Playback Settings Tips Appendix Applying media sharing settings Here, we apply the settings to share music files stored on a PC and NAS on the network. If you are using a Media Server, be sure to apply this setting first. 22When using Windows Media Player 12 (Windows 7 / Windows 8) 1 2 3 4 Start up Windows Media Player 12 on the PC. 5 Click “OK” to finish. 22When using Windows Media Player 11 Select “More streaming options...” in the “Stream”.
Contents Connections Playback Settings Playing back files stored on a PC and NAS Operation buttons 1/3 Use this procedure to play music files or playlists. 1 Prepare for playback. 89 q Check the network environment, then turn on this unit’s power (vpage 21 “Connecting to a home network (LAN)”). w Prepare the computer (vComputer’s operating instructions). 2 3 Press MUSIC SERVER. 4 Use ui to select the file, then press ENTER.
Contents Connections Playback Settings Tips % • WMA Lossless files can be played when using a server supporting transcoding, such as Windows Media Player Ver. 11 or later. NOTE • When playing back music files with your PC or NAS connected through wireless LAN, audio may be interrupted depending on your wireless LAN environment. In this case, play back music files with your PC or NAS connected through wired LAN. • The order in which the tracks/files are displayed depends on the server specifications.
Contents Connections Playback Settings Tips Appendix Listening to Last.fm • Last.fm learns what you love... and it’s a great way to discover new music. Your new Marantz Network Receiver is very clever. You can create a free Last.fm profile when you start using your Marantz Network Receiver and magically keep track of all the songs you hear. When you sign in at http://www.last.
Contents Connections Playback Settings Listening to Last.fm 1 Prepare for playback. 2 Press ONLINE MUSIC to switch the input source to “Last.fm”. 3 If you have a Last.fm account, use ui to select “I have a Last.fm account”, then press ENTER. 5 Use ui to select menu and then press ENTER. Input “Username” and “Password” then select “Login“. The top menu for Last.fm is displayed. • For character input, see page 65.
Contents 6 Connections Playback Settings Disassociate this unit from your Last.fm account. When you press p during playback, the following menu appears. Love this track : • Loving tracks improves your Last.fm recommendations, and you can optionally share them on popular social networks. Ban this track : • If you ban a track, we won’t play it again. You can undo this on the Last.fm website. Scrobbling : • Scrobbling sends the tracks you played to your Last.fm account.
Contents Connections Playback Settings Tips Appendix Listening to Spotify Introduce your Marantz Network Receiver to a whole new world of music. With Spotify, you can enjoy instant access to millions of songs. A Spotify Premium subscription is required. For details, see the Spotify homepage. http://www.spotify.com ONLINE MUSIC Listening to Spotify 1/3 89 INFO uio p ENTER 1 Prepare for playback. 2 Press ONLINE MUSIC to switch the input source to “Spotify”.
Contents 4 Connections Playback Settings Input “Username” and “Password”. • For character input, see page 65. The types of characters that can be input are as shown below. GLower case charactersH abcdefghijklmnopqrstuvwxyz äàáâãåæçðèéêëìíîïñöòóôõøüùúûýþÿß GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ ÄÀÁÂÃÅÆÇÐÈÉÊËÌÍÎÏÑÖÒÓÔÕØÜÙÚÛÝÞ GSymbolsH !“#$%&‘()z+,-.
Contents 9 Connections Playback Settings Operation buttons When you press p during playback, the following menu appears. 1/3 Star this track : • Adds a star to the selected track. Unstar this track : • Unregister a star to the selected track. Browse “Artist name” : • Displays the list of albums by the artist of the track that is being played back. Browse “Album name” : • Displays the list of tracks on the album that is being played back.
Contents Connections Playback Settings Tips Appendix Favorite function This section provides information on the Favorite function. • The Favorite function allows you to register your favorite broadcast stations and files in the Favorite List in advance so that you can call and listen to the stations or files right away, whenever you want. • The contents that you can register and call are Internet radio station, music server. • Up to 50 items can be stored in the Favorite List.
Contents Connections Playback Settings Registering stations or files to the favorites list 1 Press FAVORITES ADD while the Internet radio station or file to register is played back. 2 Use ui to select a number to register the station or file, and press ENTER. Calling stations or files from the favorites list 1 2 Press FAVORITES CALL. 3 When the prompt “Delete?” appears, press ENTER. Use ui to select the station or file that you want to delete, and press CLEAR.
Contents Connections Playback Settings Tips Appendix Playing iPod • You can use the USB cable provided with the iPod to connect the iPod with the unit's Front and Rear USB port and enjoy music stored on the iPod. • For information on the iPod models that can be played back with this unit, see “Supported iPod / iPhone models” (vpage 20).
Contents Connections Playback Settings Listening to music on an iPod 1 Connect the iPod to the USB port (vpage 19). 2 Press FRONT USB or REAR USB to switch the input source to “Front USB” or “Rear USB”. % When you connect iPod to the Front USB port, the input source automatically switches to “Front USB”. NOTE • Depending on the type of iPod and the software version, some functions may not operate.
Contents Connections Playback Settings Setting operation mode (Remote iPod Mode) Operation buttons 1/3 In this mode, various lists and screens during playback on the iPod are displayed on the body. This section describes the steps up to playing back tracks on the iPod in “Remote iPod”. 1 2 89 RANDOM Press MODE and display “Remote iPod”. REPEAT Use ui to select the file to be played, then press ENTER. Playback starts.
Contents Connections Playback Settings Tips Charging the iPod You can charge your iPhone/iPod by connecting it to USB port. 22Standby charging If the unit enters power standby mode while the iPhone/iPod is charging, the unit will switch to standby charging mode, and the iPhone/iPod will continue to be charged. When in standby charging mode, the power display light turns red.
Contents Connections Playback Settings Tips Appendix Playing a USB memory device • Playing back music stored on a USB memory device. • Only USB memory devices conforming to mass storage class and MTP (Media Transfer Protocol) standards can be played on this unit. • This unit is compatible with USB memory devices in “FAT16” or “FAT32” format. • This unit can play back the following files.
Contents Connections Playback Settings Playing files stored on USB memory devices 1 Operation buttons 1/3 Connect the USB memory device to the USB port (vpage 19). 89 When you connect USB memory device to the Front USB port, the input source automatically switches to “Front USB”. 2 Press FRONT USB or REAR USB to switch the input source to “Front USB” or “Rear USB”. 3 Use ui to select the file to be played, then press ENTER. RANDOM REPEAT Playback starts.
Contents Connections Playback Settings Tips Appendix Listening to ANALOG IN AUX 1 Prepare for playback. 2 3 Press AUX to select “Analog In”. Check the connection, then turn on this units. Play the component connected to this unit. Listening to DIGITAL IN 1 Prepare for playback. 2 3 Press AUX to select “Digital In”. Check the connection, then turn on this units. Play the component connected to this unit.
Contents Connections Playback Settings Appendix Tips AirPlay function Enjoy music from your iTunes library with high quality sound anywhere in your home. Streaming music stored in iPhone, iPod touch, or iPad directly to the unit PC If you update your “iPhone/iPod touch/iPad” to iOS 4.2.1 or later, you can stream music stored in your “iPhone/iPod touch/iPad” directly to this unit. This unit Router 1 Make the Wi-Fi settings for iPhone, iPod touch, or iPad.
Contents Connections Playback Settings Playing iTunes music with this unit 1 Install iTunes 10, or later, on a Mac or Windows PC that is connected to the same network as this unit. 2 Turn this unit ON. Selecting multiple speakers (devices) It is possible to play iTunes songs on your home’s AirPlay compatible speakers (devices) other than those of this unit. 1 2 Set “Network Control” (vpage 71) to “On” for this unit. NOTE Click the AirPlay icon ' and select “Multiple”.
Contents Connections Playback Settings Perform iTunes playback operations with the remote control unit of this unit Devices Preferences General With this unit’s remote control unit, you can perform iTunes song play, pause, and auto search (cue) operations. 1 2 3 Playback Sharing Store Parental Devices Advanced Device backups: Select “Edit” – “Preferences...” on the menu. Select “Devices” in the iTunes setting window. Delete Backup ...
Contents Connections Playback Settings Appendix Tips Remote play function 22Roles each device plays You can use your home network to play back with this unit music files stored on PC, NAS, mobile phones and portable audio players. In this case, you use PC, mobile phones and portable audio players for operations. The following devices are used for Remote Play. As specified in the DLNA standard, these devices are called DMC, DMS or DMR according to their role.
Contents Connections Playback Settings Operations are different for each device, but the procedures for preparing for Remote Play are the same. The preparation procedures are shown below. You must make settings on DMC and DMS for Remote Play. Make the following settings. Also see the owner’s manual of each device for settings. 22Settings on PC and NAS Make settings on PC and NAS to exchange data with DMR devices. For settings, see “Applying media sharing settings” (vpage 31).
Contents Connections Playback Settings Tips Appendix Web control function You can control this unit from a web control screen on a web browser. Controlling the unit from a web control PC Router This unit 1 Switch the “Network Control” (vpage 71) setting to “On”. 2 Check the IP address of this unit with “Network Information” (vpage 71).
Contents 4 Connections Playback Settings 5 Enter the IP address of this unit in browser’s address box. For example, if the IP address of this unit is “192.168.0.2”, enter “http://192.168.0.2”. http://192.168.0.2 w Bonjour NETWORK apple Yahoo! Japan FIRMWARE e r Please select the menu. YouTube Wikipedia news(45) Please select the menu. FIRMWARE e Click when you setup network settings. (vGExample 1H) r Click when you update firmware (vpage 68) q Entering the IP address.
Contents 6 Operate. NETWORK FIRMWARE Connections Playback Settings 7 GExample 1H Network Setting 1 NETWORK Friendly Name Marantz M-CR510 NETWORK t Set FIRMWARE y Set Default Network Connection Select Connection Select Connection [+]DHCP or Proxy Operate.
Contents Connections Playback Settings Tips 22Update on web screen nn Network connection settings Q0 Various items will be displayed if you selected “Wi-Fi” in Example 1. Select or input items as necessary, and then click “Test Connection” to apply the changes. • Items displayed may vary depending on selected items and connection status. • After selecting each item, wait a moment for the display to be updated. Q1 Displayed if “DHCP” or “Proxy” is selected in Example 1.
Contents 2 Connections Playback Settings 4 When the following screen is displayed by the PC, click the “Choose File” (q) button, select the update file, and click the “Upload” (w) button. Tips Appendix When the following screen is displayed, updating is complete. Firmware Firmware New Firmware: xxx.fw Upload new firmware Choose File Firmware upload status: 100% completed. The upload process finished successfully. Please close this.
Contents Connections Playback Settings Tips Appendix Other functions Adjusting the tone (vpage 60) SLEEP CLOCK DIMMER Sleep timer function (vpage 61) Checking the current time (vpage 61) Switching the display’s brightness (vpage 61) DBB/ TONE uio p ENTER Front panel SETUP Rear panel 59 Remote Index
Contents Connections Playback Settings Adjusting the tone 1 Press DBB/TONE to select the tone parameter to be adjusted. 2 Use ui to adjust the “Dynamic Bass Boost”, “Bass”, “Treble”, “Balance” or “Source Direct”. Tips nn Treble Adjusts the treble sound. –10dB – +10dB (Default : 0dB) nn Balance Use o p to adjust the left/right volume balance. • To make other tone adjustments at this time, press DBB/TONE. nn Source Direct The tone is not adjusted.
Contents Connections Playback Settings Sleep timer function Appendix Checking the current time You can have the power automatically switched to standby once a set time has elapsed. This is convenient for listening while going to sleep. 1 Tips 22Checking the current time when the power is on Press SLEEP and display the time you want to set. Press CLOCK. • Press once more and the display returns to its original condition. • The OFF indicator on the display lights.
Contents Connections Playback Settings Tips Appendix Settings Menu map For menu operations, see the following page. By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences. 22Quick Setup Setting items Quick Setup Description Page Performs the network settings using a Wizard style window. For details on the operations, see the separate “Quick Setup Guide”.
Contents Connections Playback Settings Tips Appendix 22Network Setting items Description Page Network Information Displays various information about the network. 71 Network Control Performs the ON/OFF settings for the network function when in standby mode. 71 Friendly Name Edits a name displayed on the Internet. 71 Last.fm Display Disables the display of Last.fm on the menu. 71 Settings Performs the settings for a wired or wireless LAN. 72 Performs the settings for a wired LAN.
Contents Connections Playback Settings Tips Appendix Menu operation TOP MENU uio p ENTER Front panel 1 Press SETUP. 2 Use uio p to select the menu to be set or operated, then press ENTER. 3 4 Use ui to change to desired setting. The menu is displayed. Press ENTER to enter the setting. • To return to the previous item, press o. • Exiting the Menu, press SETUP while the menu is displayed. The menu display disappears. • To back to the top of the menu, during menu operation, press TOP MENU.
Contents Connections Playback Settings Tips Appendix Inputting characters On this unit, you can change the name displayed on the following menu to the names that you prefer. • Character Search (vpage 28, 32, 47) • Friendly Name (vpage 71) • Character input for the network functions (vpage 28, 35, 37) Using the number buttons 1 2 Using the cursor buttons Display the menu for inputting characters. Use o p to move the cursor to the character you want to change.
Contents Connections Playback Settings Tips Appendix General Make various other settings. 22Edit Alarm Alarm Edit the once alarm and everyday alarm. Set the once alarm and everyday alarm. 22Once Time display : Set the once alarm to on. Off : Set the once alarm to off. 22Everyday Time display : Set the everyday alarm to on. Off : Set the everyday alarm to off. 1 2 Use ui to select the alarm mode, then press ENTER. 3 4 Use ui to select the input source, then press ENTER.
Contents Connections Playback Settings Clock Set the output frequency characteristics. Flat (Default) : Properties are flat. Response 1 : Cuts low frequencies 60 Hz or under by –12 dB/oct. Response 2 : Cuts low frequencies 100 Hz or under by –12 dB/oct. Response 3 : Cuts low frequencies 60 Hz or under by –12 dB/oct. Also, raises the 400 Hz region by 3 dB. Response 4 : Cuts low frequencies 100 Hz or under by –12 dB/oct. Also, raises the 400 Hz region by 3 dB.
Contents Connections Playback Settings Language Tips Appendix Firmware Set the language for display on the menu. English (Default) / Deutsch / Français / Italiano / Nederlands / Español / Svenska / / Polski Set whether or not to check for firmware update, update the firmware, and display update, upgrade and alert notifications. 22Update Update the firmware of Marantz Network Receiver. Auto Standby Check for Update : Check for firmware updates.
Contents Connections Playback Settings 22Notifications Display new features that can be downloaded to this unit and perform an upgrade. Upgrade Package : Display the items to be upgraded. Upgrade Status : Display a list of the additional functions provided by the upgrade. Upgrade Start : Execute the upgrade process. When the upgrade starts, the display is shut down. During the upgrade, the amount of upgrade time which has elapsed is displayed.
Contents Connections Playback Settings Tips Notes concerning use of “Update” and “Add New Feature” • In order to add new functions, the environment and settings required for connecting to broadband internet are needed (vpage 21). • Perform the add new feature operation after at least 2 minutes has elapsed since turning this unit’s power on. • Do not turn off the power until updating or upgrading is completed.
Contents Connections Playback Settings Tips Appendix Network To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network via DHCP, set “DHCP” to “On” (use the default setting). This allows this unit to use your home network.
Contents Connections Playback Settings Appendix nn Subnet Mask Settings When connecting an xDSL modem or connector adapter directly to this unit, input the subnet mask indicated in the documentation supplied by your provider. Normally input 255.255.255.0. You can make detailed settings for the network. To change the network environment, perform “Quick Setup”. (For details on the operations, see the separate “Quick Setup Guide”.
Contents Connections Playback Settings 22When making Wi-Fi connection 1 Auto Scan / WPS(PIN) / Web Browser Setup / Manual % 2 Set this PIN code to the register. nn Web Browser Setup nn Auto-Scan Use a web browser to set up Wi-Fi. A Wi-Fi device that can perform web browse operations is required. This automatically searches for networks. From the list of the networks, select the one you want to connect to. 1 2 3 When the network you want to connect to is not detected, select “Rescan”.
Contents Connections Playback Settings Tips nn Manual Sets the wireless connection manually. SSID : Input the name of the wireless network (SSID). Security : Select the encryption method according to the encryption setting of the access point you are using. Password : Input the password. Default Key : Select the default key. • When connecting to a “WEP” encrypted network, “Default Key” menu is displayed. DHCP / Proxy : M ake settings for DHCP / Proxy (vpage 72).
Contents Connections Playback Settings Tips Appendix Tips Contents 22Tips.....................................................................(76) 22Troubleshooting...............................................(77) Simple operations in the power off state..........................................(76) Power does not turn on / Power is turned off...................................(77) Simple operations for iPod/USB........................................................(76) Indicator is flashing..
Contents Connections Playback Settings Tips Appendix Tips Simple operations in the power off state • When a input source select buttons or FAVORITES CALL button is pressed, the operation is performed at the same time as the unit switches on (vpage 25, 40). • When the Network Control function is set to “On”, you can perform playback, or other operations through AirPlay, App or the web control function (vpage 49, 54, 71).
Contents Connections Playback Settings Tips Appendix Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase.
Contents Connections Playback Settings Tips Appendix 22Operations cannot be performed through the remote control unit Symptom Operations cannot be performed through the remote control unit. Cause/Solution Page • Batteries are worn out. Replace with new batteries. • Operate the remote control unit within a distance of about 7 m from this unit and at an angle of within 30°. • Remove any obstacle between this unit and the remote control unit.
Contents Connections Playback Settings Tips Appendix 22No sound comes out Symptom No sound comes out of speakers. Front panel Rear panel Cause/Solution Page • Check the connections for all devices. • Insert connection cables all the way in. • Check that input connectors and output connectors are not reversely connected. • Check cables for damage. • Check that speaker cables are properly connected. Check that cable core wires come in contact with the metal part on speaker terminals.
Contents Connections Playback Settings Tips Appendix 22Desired sound does not come out Symptom Cause/Solution Page Left/right volume balance is unbalanced • Press the DBB/TONE button on the remote control to adjust the balance. 60 No sound from the sub woofer. • Check the sub woofer connections. • Switch the sub woofer power on. 17 – Set values are not reflected in “Dynamic Bass Boost“, “Bass“, “Treble“ or “Speaker Response“.
Contents Connections Playback Settings Tips Appendix 22iPod cannot be played back Symptom Cause/Solution Page • When using iPod by connecting it to the USB port, some iPod variations are not supported. • When iPod is connected by using a USB cable other than the genuine cable, iPod may not be recognized. Use a genuine USB cable. 20 – • This unit and PC / iPhone / iPod touch / iPad are not connected to the same network (LAN).
Contents Connections Playback Settings Tips Appendix 22USB memory devices cannot be played back Symptom Cause/Solution Page • The set cannot recognize a USB memory device. Disconnect and reconnect the USB memory device. • USB memory devices of a mass storage class or those compatible with MTP are supported. • This unit does not support a connection through a USB hub. Connect the USB memory device directly to the USB port. • The USB memory device must be formatted to FAT16 or FAT32.
Contents Connections Playback Settings Tips Appendix 22File names on the iPod/USB memory device are not displayed properly Symptom The file names are not displayed properly (“...”, etc.). Cause/Solution Page • Characters that cannot be displayed are used. This is not a malfunction. On this unit, characters that cannot be displayed are replaced with a “.” (period). – 22The Internet radio cannot be played back Symptom Cause/Solution Page The broadcasting station list is not displayed.
Contents Connections Playback Settings Tips Appendix 22An Error message is displayed by Last.fm Symptom Cause/Solution Page • Login authentication error. Cannot login to Last.fm. (“Subscription required” is displayed.) • If a nonsubscriber user accesses it. Or when the listening limitation exceeds it. • Enter the correct username and password and retry login. • You need to be a paid Last.fm subscriber to listen to this. • Visit www.last.fm/subscribe to upgrade. 34 – – – – Cannot play back music.
Contents Connections Playback Settings Tips Appendix 22Music files on PC or NAS cannot be played back Symptom Cause/Solution Page Files stored on a computer cannot be played. • Files are stored in a non-compatible format. Record in a compatible format. • You are attempting to play a file that is copyright protected. Files that are copyright protected cannot be played on this unit. • Set and computer are connected by USB cable. The set’s USB port cannot be used for connection to a computer.
Contents Connections Playback Settings Tips Appendix 22Cannot connect by Wi-Fi Symptom Cannot connect to the network. Cannot connect to WPS. Cannot connect to the network using iPhone/iPod touch/iPad Front panel Rear panel Cause/Solution Page • The network name and password (WEP, etc.) settings are wrong. Configure the network settings according to the setting details of this unit.
Contents Connections Playback Settings Resetting factory settings Perform this procedure if the display is abnormal or if operations cannot be performed. When the microprocessor is reset, all the settings are reset to their default values and all previously stored custom settings will be have to be manually restored. Tips Appendix 1 2 Pull the power cord out of the power outlet. 3 When the power indicator lights green, release the buttons.
Contents Connections Playback Settings Tips Appendix Appendix Playing back USB memory devices z1 • This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. • This unit can show the artwork that was embedded by using MP3 ID3Tag Ver. 2.3 or 2.4. • This unit is compatible with WMA META tags. • If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/ MP3/WAV/FLAC) or 349 × 349 (MPEG-4 AAC), then music may not be played back properly.
Contents Connections Playback Settings The limits on the number of folders and files that can be displayed by this unit are as follows. Item Memory capacity z1 USB memory devices WMA (Windows Media Audio) MP3 (MPEG-1 Audio Layer-3) 8 levels Number of folders 500 Number of files z2 5000 z1 z2 22Playable broadcast station specifications FAT16 : 2 GB, FAT32 : 2 TB Number of folder directory levels The limited number includes the root folder.
Contents Connections Playback Settings Playing back files stored on PC or NAS z1 • This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. • This unit can show the artwork that was embedded by using MP3 ID3Tag Ver. 2.3 or 2.4. • This unit is compatible with WMA META tags. • If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/ MP3/WAV/FLAC) or 349 × 349 (MPEG-4 AAC), then music may not be played back properly.
Contents Connections Playback Settings Explanation of terms F FLAC FLAC stands for Free lossless Audio Codec, and is a lossless free audio file format. Lossless means that the audio is compressed without any loss in quality. The FLAC license is as shown below.
Contents Connections Playback Settings M MP3 (MPEG Audio Layer-3) This is an internationally standardized audio data compression scheme, using the “MPEG-1” video compression standard. It compresses the data volume to about one eleventh its original size while maintaining sound quality equivalent to a music CD. MPEG (Moving Picture Experts Group), MPEG-2, MPEG-4 These are the names for digital compression format standards used for the encoding of video and audio.
Contents Connections Playback Settings P Protection circuit This is a function to prevent damage to devices within the power supply when an abnormality such as an overload, excess voltage occurs or over temperature for any reason. In this unit, the standby indicator blinks and the unit enters standby mode when an abnormality occurs. Tips V vTuner This is a free online content server for Internet Radio. Note that usage fees are included in upgrade costs.
Contents Connections Playback Settings Windows Media DRM This is a copyright protection technology developed by Microsoft. Content providers are using the digital rights management technology for Windows Media contained in this device (WM-DRM) to protect the integrity of their content (Secure Content) so that their intellectual property, including copyright, in such content is not misappropriated. This device uses WM-DRM software to play Secure Content (WM-DRM Software).
Contents Connections Playback Settings Tips Appendix Trademark information “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Contents Connections Playback Settings Tips Specifications 22Audio section • Audio amplifier Rated output: Dynamic power: Output terminals: Input sensitivity/impedance: THD+N (1 kHz, 5 W, 6 Ω/ohms): S/N ratio (10 W, 6 Ω/ohms, IHF-A): Tone control: Frequency response: Front panel Rear panel 2-channel driving 50 W + 50 W (6 Ω/ohms, 1 kHz, THD+N 0.7 %) 60 W + 60 W (6 Ω/ohms, 1 kHz, THD+N 10 %) Speaker 6 – 8 Ω/ohms Suited for headphones/stereo headphones Analog In : 200 mV/22 kΩ/kohms Analog In : 0.
Contents Connections Playback Settings Tips Appendix 22Wireless LAN Network type (wireless LAN standards): Transfer rate: Security: Used frequency range: No. of channels: Conforming to IEEE 802.11b Conforming to IEEE 802.11g (Conforming to Wi-Fi®)z DS-SS: 11 / 5.5 / 1 Mbps (Automatic switching) OFDM: 54 / 48 / 36 / 24 / 18 / 12 / 9 / 6 Mbps (Automatic switching) SSID (Network name) WEP key (network key) (64/128 bits) WPA-PSK (TKIP/AES) WPA2-PSK (TKIP/AES) 2.412 GHz – 2.
Contents Connections Playback Settings Tips Appendix 22Clock/Alarm Clock type: Alarm: Power line frequency synchronized method (Within ±60 seconds per month) Everyday alarm / Once alarm : One system each Sleep timer : Max. 90 minutes 22General Power supply: Power consumption: Power consumption in standby mode: Power consumption in “Network Control” – “On” mode: AC 230 V, 50/60 Hz 55 W 0.3 W 3W For purposes of improvement, specifications and design are subject to change without notice.
Contents Connections Index Playback Settings vv C vv A Accessories······························································· 5 Add New Feature···················································· 69 Adjusting the master volume·································· 26 AES········································································· 91 AirPlay······························································· 49, 91 ALAC······································································· 91 A
Contents Connections vv N Settings vv R Network Control······················································ 71 Network Information··············································· 71 Network Names (SSID)··········································· 92 Network settings···················································· 71 Notifications···························································· 69 vv P Playback ALAC······························································ 30, 46 ANALOG IN··········
Contents Connections Playback Settings License nn Expat This section describes software license used for this unit. To maintain the correct content, the original (English) is used. Expat License. Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd nn Boost http://www.boost.org/ Boost Software License - Version 1.
Contents Connections g. “Standard Version” refers to such a Work if it has not been modified, or has been modified in accordance with the consent of the Author, such consent being in the full discretion of the Author. h. “Work” refers to the collection of files distributed by the Publisher, including the Source Code, Executable Files, binaries, data files, documentation, whitepapers and the Articles. i.
Contents Connections 6. Representations, Warranties and Disclaimer. THIS WORK IS PROVIDED “AS IS”, “WHERE IS” AND “AS AVAILABLE”, WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS OR GUARANTEES. YOU, THE USER, ASSUME ALL RISK IN ITS USE, INCLUDING COPYRIGHT INFRINGEMENT, PATENT INFRINGEMENT, SUITABILITY, ETC.
Contents Connections • Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. • Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
Contents Connections nn Tremor http://wiki.xiph.org/index.php/Tremor Copyright (c) 2002, Xiph.org Foundation Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: • Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Contents Connections Playback Settings Tips Appendix nn zlib nn cURL nn c-ares zlib.h -- interface of the ‘zlib’ general purpose compression library version 1.2.3, July 18th, 2005 COPYRIGHT AND PERMISSION NOTICE Copyright 1998 by the Massachusetts Institute of Technology. http://www.zlib.net/ http://curl.haxx.se Copyright (C) 1995-2004 Jean-loup Gailly and Mark Adler This software is provided ‘as-is’, without any express or implied warranty.
Contents Connections Playback Settings Tips 22License Information for the Software Used in the Unit About GPL (GNU-General Public License), LGPL (GNU Lesser General Public License) License This product uses GPL/LGPL software and software made by other companies. After you purchase this product, you may procure, modify or distribute the source code of the GPL/ LGPL software that is used in the product.
Contents Connections Playback Settings Tips Appendix 22Dimensions 41 22Weight : 2.
D&M Holdings Inc.