Operation Manual

61
Appendix
TipsSettingsConnections
Contents
Front panel Rear panel IndexRemote
Playback
Sleep timer function
You can have the power automatically switched to standby once a set
time has elapsed. This is convenient for listening while going to sleep.
1
Press SLEEP and display the time you want to set.
•The
OFF
indicator on the display lights.
•You can set the sleep timer in the range from 10 to 90 minutes in
steps of 10 minutes.
2 To cancel the sleep timer
Press SLEEP to set “Sleep 1 O”.
The
OFF
indicator on the display turns o.
%
•The sleep timer is also cancelled when this unit is set to the standby mode.
•To check the time remaining until the sleep timer is activated, press SLEEP.
Checking the current time
2 Checking the current time when the power is
on
Press CLOCK.
•Press once more and the display returns to its original condition.
2 Checking the current time when the power is
set to standby
Press CLOCK.
•The current time is displayed for 30 seconds.
NOTE
•The time cannot be set when in the standby mode. Turn on the power first.
Switching the display’s brightness
1
Press DIMMER.
•The display brightness is adjusted each time DIMMER is pressed.
100% (Default) / 75% / 50% / 25% / O
%
•If you operate the buttons when the display’s brightness is set to “O”, the display
temporarily lights at the 25% brightness level.