Model MM9340 Model MM9360 Power Amplifier
The lightning flash with arrowhead symbol, within an equalateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equalateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the device.
SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 11.
1. INTRODUCTION Thank you for purchasing the Marantz MM9360 or MM9340 power amplifier for your sound system. Please take a few minutes to read this manual thoroughly, before you attempt connections and operations.The illustrations used in this manual refer to the six channel MM9360, but the MM9340 operates in the same manner, only with four channels and more power per channel. This Marantz appliance is a Multi channel power amplifier, that is designed for home theatre and high quality audio systems.
4. PROTECT indicator 5. POWER indicator The protect LEDs illuminate when the fault monitoring microprocessor has determined that one of the following conditions exists: The blue power LED comes on when the amplifier is fully powered up. 6. POWER switch - Power supply undervoltage Press this switch to the ON position to turn the power on, and to the OFF position to turn the power off.
9. INPUT XLR and ΒΌ" PHONE jacks (Gnd) The amplifier uses 1/4" phone jacks and female XLR jacks for balanced input signals, recommended for longer input Tip (+) cables and to minimize hum and noise. Sleeve (Gnd) (+) Ring (-) RCA Plug Stereo Phone Plug used for balanced Balanced Inputs It is recommended that balanced input connections be used whenever possible to take full advantage of the amplifier's common mode rejection properties, and to reduce groundloop problems.
CH1 (1-2 MONO) 4 3 CH 2 5 4 6 8 2 1 7 9 0 8 2 1 10 4 CH5 7 10 3 8 1 9 10 0 CH 6 (1-2 MONO) 4 5 6 6 2 9 0 5 3 7 STEREO BRIDG E MO NO PUSH PUSH CH 4 3 8 1 10 CH3 (1-2 MONO) 4 5 6 6 2 9 0 5 3 7 4 8 2 1 7 8 1 10 9 10 0 STEREO BRIDG E MO NO P U SH 6 2 9 0 5 3 7 STEREO BRIDG E MO NO P U SH P U SH CAUTION MODEL NO.
7. REPAIRS Only the most competent and qualified technicians should be allowed to service your unit. Marantz and its factory trained warranty station personnel have the knowledge and special equipment needed for repair and calibration of this precision instrument. fier power for that channel is evenly divided among speakers, so 100 watts driving two parallel speakers of equal impedance provides 50 watts to each speaker, etc. 3.
anced connections, and try moving the amplifier, wiring, lighting, or other equipment to different locations to isolate the source of the noise. 9. SPECIFICATIONS *Power Output (Maximum Average Power, 0.
Marantz America, Inc. 1100 Maplewood Drive Itasca, Illinois 60143 phone: 630.741.0300 fax: 630.741.
