Owner's Manual
Table Of Contents
- Owner’s Manual
- Contents
- Accessories
- Part names and functions
- Connections
- Contents
- Cables used for connections
- Connecting speakers
- Connecting a playback device
- Connecting a recording device
- Connecting to a device with digital audio connectors
- Connecting a USB flash drive to the USB port
- Connecting to a home network (LAN)
- Connecting a pre-amplifier
- Connecting devices with remote control connectors
- Connecting the power cord
- Playback
- Contents
- Basic operation
- Playing CDs
- Listening to music on a Bluetooth device
- Playing digital input
- Getting the HEOS App
- Listening to Internet Radio
- Playing music stored on your mobile
- Playing back files stored on a PC or NAS
- Playing music from a USB flash drive
- AirPlay function
- Spotify Connect function
- Convenience functions
- Settings
- Tips
- Troubleshooting
- Power does not turn on / Power is turned off
- Operations cannot be performed through the remote control unit
- Display on this unit shows nothing
- No sound comes out
- Sound is interrupted or noise occurs
- Desired sound does not come out
- AirPlay cannot be played back
- USB flash drives cannot be played back
- Bluetooth cannot be played back
- The Internet radio cannot be played back
- Music files on PC or NAS cannot be played back (Music server)
- Various online services cannot be played
- Cannot connect to a wireless LAN network
- Audio from digital devices cannot be played back (HDMI ARC/Coaxial/Optical)
- The input source switches to “HDMI ARC”, “Optical” or “Coaxial”
- The HDMI control function does not work
- Update/upgrade error messages
- Restoring the firmware to the factory defaults
- Appendix
Recording
Audio signals input into this unit can be output to an external recording
device. When recording audio from a playback device connected to this
unit, audio can be recorded with the playback device still connected to this
unit.
1
Press AMP X to turn on.
2
Press the input source select button to switch to the
input source from which you want to record.
The selected input source is displayed on the display.
3
Recording starts.
0
For information on operations, see the owner’s manual of the
recording device.
Using this unit as a power amplifier
When connecting a pre-amplifier and using this unit as a power amplifier,
switch the input source of this unit to “PWR AMP”.
1
Turn the INPUT selector on the main unit to switch the
input source to “PWR AMP”.
“PWR AMP” is displayed on the display.
0
When the input source is “PWR AMP”, adjustment of the volume, balance and
tone has no effect. Adjust these adjustments on the pre-amplifier.
NOTE
0
When the input source is “PWR AMP”, the main unit outputs at maximum volume.
Check the output level on the input device before playing it and adjust the volume
accordingly.
0
If the input source is set to “PWR AMP”, the network function of this device
becomes disabled. When you switch to another input source from “PWR AMP”,
this device is restarted, and the network function is enabled.
0
If the input source is set to “PWR AMP”, the “Auto-Play” function of this unit
becomes disabled. (v p. 68)
Contents Connections Playback Settings Tips Appendix
62
Front panel Rear panel
Remote control
unit
Index