Owner's Manual
Table Of Contents
- Owner’s Manual
- Contents
- Accessories
- Part names and functions
- Connections
- Contents
- Cables used for connections
- Connecting speakers
- Connecting a playback device
- Connecting a recording device
- Connecting to a device with digital audio connectors
- Connecting a USB flash drive to the USB port
- Connecting to a home network (LAN)
- Connecting a pre-amplifier
- Connecting devices with remote control connectors
- Connecting the power cord
- Playback
- Contents
- Basic operation
- Playing CDs
- Listening to music on a Bluetooth device
- Playing digital input
- Getting the HEOS App
- Listening to Internet Radio
- Playing music stored on your mobile
- Playing back files stored on a PC or NAS
- Playing music from a USB flash drive
- AirPlay function
- Spotify Connect function
- Convenience functions
- Settings
- Tips
- Troubleshooting
- Power does not turn on / Power is turned off
- Operations cannot be performed through the remote control unit
- Display on this unit shows nothing
- No sound comes out
- Sound is interrupted or noise occurs
- Desired sound does not come out
- AirPlay cannot be played back
- USB flash drives cannot be played back
- Bluetooth cannot be played back
- The Internet radio cannot be played back
- Music files on PC or NAS cannot be played back (Music server)
- Various online services cannot be played
- Cannot connect to a wireless LAN network
- Audio from digital devices cannot be played back (HDMI ARC/Coaxial/Optical)
- The input source switches to “HDMI ARC”, “Optical” or “Coaxial”
- The HDMI control function does not work
- Update/upgrade error messages
- Restoring the firmware to the factory defaults
- Appendix
Menu map
For menu operations, see the following page.
By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.
Setting items Detailed items Description Page
Audio Digital Filter This unit is equipped with a sound quality adjusting function which allows
users to enjoy the desired playback sound quality.
66
Lock Range Narrowing down the “Lock Range” setting reduces jittering, providing
clearer sound.
66
Volume Limit Make a setting for maximum volume. The volume cannot be increased
above this setting.
67
Low Pass Filter Sets the low pass filter for the subwoofer output. Set this according to your
speakers and subwoofer.
67
TV TV Input Set the input source to be used when playing audio from the TV through this
unit.
68
Auto-Play Set the On/Off setting of the “Auto-Play” function that automatically switches
the input source when the audio signal specified in “TV Input” is input and
playback is performed.
68
HDMI Power Off Control Set the “HDMI Power Off Control” function that is keyed to the power off
operation of your TV to turn the device’s power to standby.
68
General Lighting The brightness of the lighting LED can be adjusted between 4 levels. The
brightness can also be synchronized to the brightness of the display.
Switching the display off reduces a source of noise that affects sound
quality, enabling higher sound quality playback.
69
Auto-Standby Sets the unit power to standby when the unit is not in use. 69
Reset Various settings are reset to the factory default values. 70
Contents Connections Playback Settings Tips Appendix
63
Front panel Rear panel
Remote control
unit
Index