Owner's Manual
Table Of Contents
- Owner’s Manual
- Contents
- Accessories
- Part names and functions
- Connections
- Contents
- Cables used for connections
- Connecting speakers
- Connecting a playback device
- Connecting a recording device
- Connecting to a device with digital audio connectors
- Connecting a USB flash drive to the USB port
- Connecting to a home network (LAN)
- Connecting a pre-amplifier
- Connecting devices with remote control connectors
- Connecting the power cord
- Playback
- Contents
- Basic operation
- Playing CDs
- Listening to music on a Bluetooth device
- Playing digital input
- Getting the HEOS App
- Listening to Internet Radio
- Playing music stored on your mobile
- Playing back files stored on a PC or NAS
- Playing music from a USB flash drive
- AirPlay function
- Spotify Connect function
- Convenience functions
- Settings
- Tips
- Troubleshooting
- Power does not turn on / Power is turned off
- Operations cannot be performed through the remote control unit
- Display on this unit shows nothing
- No sound comes out
- Sound is interrupted or noise occurs
- Desired sound does not come out
- AirPlay cannot be played back
- USB flash drives cannot be played back
- Bluetooth cannot be played back
- The Internet radio cannot be played back
- Music files on PC or NAS cannot be played back (Music server)
- Various online services cannot be played
- Cannot connect to a wireless LAN network
- Audio from digital devices cannot be played back (HDMI ARC/Coaxial/Optical)
- The input source switches to “HDMI ARC”, “Optical” or “Coaxial”
- The HDMI control function does not work
- Update/upgrade error messages
- Restoring the firmware to the factory defaults
- Appendix
General
Lighting
The brightness of the lighting LED can be adjusted between 4 levels. The
brightness can also be synchronized to the brightness of the display.
Switching the display off reduces a source of noise that affects sound
quality, enabling higher sound quality playback.
Sync
(Default):
The brightness is synchronized to the
brightness of the display. (v p. 61)
Bright / Dim / Dark / Off
0
When the display brightness is set to off using the DIMMER button, the lighting
LED turns off regardless of the “Lighting” setting. (v p. 61)
Auto-Standby
Sets the amount of time that must elapse without unit operation or an input
signal before the unit goes into standby automatically.
Off:
The unit does not go into standby
automatically.
1min: The unit goes into standby after 1 minutes.
5min: The unit goes into standby after 5 minutes.
15min
(Default):
The unit goes into standby after 15 minutes.
30min: The unit goes into standby after 30 minutes.
60min: The unit goes into standby after 60 minutes.
90min: The unit goes into standby after 90 minutes.
Contents Connections Playback Settings Tips Appendix
69
Front panel Rear panel
Remote control
unit
Index