Owner's Manual
Table Of Contents
- Owner’s Manual
- Contents
- Accessories
- Part names and functions
- Connections
- Contents
- Cables used for connections
- Connecting speakers
- Connecting a playback device
- Connecting a recording device
- Connecting to a device with digital audio connectors
- Connecting a USB flash drive to the USB port
- Connecting to a home network (LAN)
- Connecting a pre-amplifier
- Connecting devices with remote control connectors
- Connecting the power cord
- Playback
- Contents
- Basic operation
- Playing CDs
- Listening to music on a Bluetooth device
- Playing digital input
- Getting the HEOS App
- Listening to Internet Radio
- Playing music stored on your mobile
- Playing back files stored on a PC or NAS
- Playing music from a USB flash drive
- AirPlay function
- Spotify Connect function
- Convenience functions
- Settings
- Tips
- Troubleshooting
- Power does not turn on / Power is turned off
- Operations cannot be performed through the remote control unit
- Display on this unit shows nothing
- No sound comes out
- Sound is interrupted or noise occurs
- Desired sound does not come out
- AirPlay cannot be played back
- USB flash drives cannot be played back
- Bluetooth cannot be played back
- The Internet radio cannot be played back
- Music files on PC or NAS cannot be played back (Music server)
- Various online services cannot be played
- Cannot connect to a wireless LAN network
- Audio from digital devices cannot be played back (HDMI ARC/Coaxial/Optical)
- The input source switches to “HDMI ARC”, “Optical” or “Coaxial”
- The HDMI control function does not work
- Update/upgrade error messages
- Restoring the firmware to the factory defaults
- Appendix
Network Control
Enables network communication in standby power mode.
On:
Network is on during standby. Main unit
operable with a network compatible
controller.
Off
(Default) :
Suspend network function during standby.
0
When using the HEOS App, use with the “Network Control” setting set to “On”.
0
Although the setting is “Off” when purchased, it turns “On” automatically when the
next operation is performed.
0
Paring with a Bluetooth device
0
Wireless LAN connection
0
Connect a LAN cable to the NETWORK connector
Once the setting is made in the setting menu, the setting will not be switched
automatically even if the above operations are performed.
NOTE
0
When “Network Control” is set to “On”, the unit consumes more standby power.
0
When the input source is set to “PWR AMP” and this unit is switched to standby
mode, the network function of this unit is disabled during standby even though
“Network Control” is set to “On”.
Contents
Connections Playback Settings Tips Appendix
72
Front panel Rear panel
Remote control
unit
Index