Owner's Manual
Table Of Contents
- Owner’s Manual
- Contents
- Accessories
- Part names and functions
- Connections
- Contents
- Cables used for connections
- Connecting speakers
- Connecting a playback device
- Connecting a recording device
- Connecting to a device with digital audio connectors
- Connecting a USB flash drive to the USB port
- Connecting to a home network (LAN)
- Connecting a pre-amplifier
- Connecting devices with remote control connectors
- Connecting the power cord
- Playback
- Contents
- Basic operation
- Playing CDs
- Listening to music on a Bluetooth device
- Playing digital input
- Getting the HEOS App
- Listening to Internet Radio
- Playing music stored on your mobile
- Playing back files stored on a PC or NAS
- Playing music from a USB flash drive
- AirPlay function
- Spotify Connect function
- Convenience functions
- Settings
- Tips
- Troubleshooting
- Power does not turn on / Power is turned off
- Operations cannot be performed through the remote control unit
- Display on this unit shows nothing
- No sound comes out
- Sound is interrupted or noise occurs
- Desired sound does not come out
- AirPlay cannot be played back
- USB flash drives cannot be played back
- Bluetooth cannot be played back
- The Internet radio cannot be played back
- Music files on PC or NAS cannot be played back (Music server)
- Various online services cannot be played
- Cannot connect to a wireless LAN network
- Audio from digital devices cannot be played back (HDMI ARC/Coaxial/Optical)
- The input source switches to “HDMI ARC”, “Optical” or “Coaxial”
- The HDMI control function does not work
- Update/upgrade error messages
- Restoring the firmware to the factory defaults
- Appendix
The power turns off and the protection circuit indicator shows one long blink and four short blinks in orange.
0
The protection circuit has been activated due to a rise in temperature within this unit. Turn the power off, wait about an hour until this unit cools down
sufficiently, and then turn the power on again.
0
Please re-install this unit in a place having good ventilation.
0
Check the speaker connections. The protection circuit may have been activated because speaker cable core wires came in contact with each other or a
core wire was disconnected from the connector and came in contact with the rear panel of this unit. After unplugging the power cord, take corrective
action such as firmly re-twisting the core wire or taking care of the connector, and then reconnect the wire. (v p. 20)
0
Stop playback on the playback device, and then turn the power off and on again.
The power turns off and the protection circuit indicator shows one long blink and five short blinks in orange.
0
Stop playback on the playback device, and then turn the power off and on again.
0
If the problem is not solved by turning the power off and on again, this unit’s amplifier circuit or power circuit has failed. Unplug the power cord and
contact our customer service center.
Contents Connections Playback Settings Tips Appendix
80
Front panel Rear panel
Remote control
unit
Index