Owner's Manual
Table Of Contents
- Owner’s Manual
- Contents
- Accessories
- Part names and functions
- Connections
- Contents
- Cables used for connections
- Connecting speakers
- Connecting a playback device
- Connecting a recording device
- Connecting to a device with digital audio connectors
- Connecting a USB flash drive to the USB port
- Connecting to a home network (LAN)
- Connecting a pre-amplifier
- Connecting devices with remote control connectors
- Connecting the power cord
- Playback
- Contents
- Basic operation
- Playing CDs
- Listening to music on a Bluetooth device
- Playing digital input
- Getting the HEOS App
- Listening to Internet Radio
- Playing music stored on your mobile
- Playing back files stored on a PC or NAS
- Playing music from a USB flash drive
- AirPlay function
- Spotify Connect function
- Convenience functions
- Settings
- Tips
- Troubleshooting
- Power does not turn on / Power is turned off
- Operations cannot be performed through the remote control unit
- Display on this unit shows nothing
- No sound comes out
- Sound is interrupted or noise occurs
- Desired sound does not come out
- AirPlay cannot be played back
- USB flash drives cannot be played back
- Bluetooth cannot be played back
- The Internet radio cannot be played back
- Music files on PC or NAS cannot be played back (Music server)
- Various online services cannot be played
- Cannot connect to a wireless LAN network
- Audio from digital devices cannot be played back (HDMI ARC/Coaxial/Optical)
- The input source switches to “HDMI ARC”, “Optical” or “Coaxial”
- The HDMI control function does not work
- Update/upgrade error messages
- Restoring the firmware to the factory defaults
- Appendix
Restoring the firmware to the factory defaults
When the unit or the network functions do not work properly, operation may be improved by restoring the firmware to the factory defaults.
Perform this operation if it does not work after attempting “General” - “Reset” of the settings menu. (v p. 70)
After the firmware is restored, various settings are reset to the default settings. Configure the settings and update the firmware again.
Bluetooth / Wi-Fi
Bluetooth / Wi-Fi
ANTENNA
ANTENNA
AC IN
AC IN
Firmware reset button
1
Unplug the power cord from the power outlet.
2
Plug in the power cord while holding down the
firmware reset button on the rear panel.
3
When “Factory Restore” appears on the display,
release the buttons.
When the firmware restore is complete, “Restore Completed”
appears on the display for about 5 seconds, and the unit
automatically restarts.
0
This operation takes time because it requires reconnecting to the network,
restoring and updating the firmware.
0
If this operation does not improve the problem, contact our customer service
center.
NOTE
0
Do not turn off the power until the firmware restore is complete.
Contents Connections Playback Settings Tips Appendix
95
Front panel Rear panel
Remote control
unit
Index